Multiple Job Opportunities From Schneider Electric 9 năm ago
Địa điểm làm việc: Đồng Nai
Hết hạn: 19/09/2021
- Chi tiết công việc
- Giới thiệu công ty
Vị trí công việc này hiện tại đã hết hạn nộp hồ sơ, bạn có thể tham khảo thêm một số công việc liên quan phía dưới
1. TEMP. ACCOUNTANT (3 months)
Main responsibilities:
- Accounting document filling
- Support in report, payable, cash Requirement
- Fresh graduated major in Accounting, Finance
- Basic English and computer software
2. MANUFACTURING SENIOR SUPERVISOR
Main responsibilities:
- Responsible for management of all factory's production.
- To drive continuous improvement & resources optimization at the shop floor
- To ensure a safety environment for all employees at shop floor Requirement
- Knowledge on the electro-mechanical / electricity
- Knowledge of Autocad / Coreldraw ...
- Good at MS software, esp Excel
- Trained in Lean / Six sigma methodology
- Fluent in oral and written English.
- Over 30 years old. 3. METHOD ENGINEERING MANAGER
Main responsibilities:
- Fully responsible for Method Engineering of the company including improvement of processes and ensure the good operation of equipment and facilities
- Responsible for the Environment and Safety programs of Method Engineering department
- Lead the deployment of Schneider Production System (all domains People Commitment, Product/Process engineering and Management of Industrial and Logistic Processes).
- Implement the "continuous improvement" culture through Value Stream Mapping, MTM, Lean
- Implement the culture of Short Interval Management in order to escalate on time every
- Ensure the efficiency of manual assembly (KPIs = KE, IE and DLP)
- Deploy best practices in assembly in order to ensure high quality products but also a safe working environment for operators.
Requirement
- Graduate from Technical University (major: electro-mechanical or plastic material)
- At least 7 years practical experience in advanced manufacturing field. Prior experience as a Industrialization manager desired.
- Fluent in oral and written English.
- Expert in of moulding and extrusion
- Strong understanding for electric-mechanical
- Strong understanding in Lean and production system principles
- Green Belt certified
- Understanding of financial indicators
4. SENIOR INDUSTRIAL ENGINEER
Main responsibilities:
- Assist the ME Manager with staff the decisions to meet the goals and objectives of the department.
- Develop, motivate, and challenge employees to perform to their full potential.
- To drive continuous process improvement and cost reduction program
- Process Robustness (PFMEA, PCP, Process mapping)
- Value Stream Mapping
- Assembly Changeover
- Line & Layout Design
- Work Instruction / MI
- LADM
- MTM
- Kanban system
Requirement
- Graduate from Technical (major: electro-mechanical or plastic material)
- At least 5 years practical experience in advanced manufacturing field. Minimum 3 years experience on similar position
- Fluent in oral and written English
- Proven track record in driving corrective actions and implementing change
- Excellent communication skills with high potential in Lean, 6 sigma, leadership, process development are required
- Extensive knowledge of Industrial Engineering philosophies and processes
5. PROCESS ENGINEER
Main responsibilities:
- To design Manufacturing processes in compliance to LEAN concepts
- To ensure Manufacturing in trouble-shooting and analysis of issues
- To ensure Continuous Improvement of Processes with Six Sigma, Lean Manufacturing projects
- To deploy SPS (Schneider Production System) Deployment for the site
- To deploy & coach shop floor on lean manufacturing best practices
Requirement
- Industrial Engineering or Electro-Mechanical , Industrial Engineering Background is preferable
- Knowledge on the electro-mechanical
- Knowledge of Autocad is advantage
- Aware of the Lean Manufacturing and Six Sigma are advantage
6. PRODUCT ENGINEER
Main responsibilities:
- Be responsible related for modification stamping die to ensure its best performance in relation with Product Development Department and also quality of products.
- Support product transfer as: Material Specification of raw material, design and qualification of packaging, qualify metal part and its drawing, trial run product transfer and new product.
- In relation with Product Development Department to carry out all the modifications on the products and also parts to ensure its best performance.
Requirement
- Graduated from Technical University (major: mechanical).
- At least 2 years experience in designing relation mechanic
- Strong understanding product related in assembly
- Use fluently computer, AutoCAD and Corel as mandatory
- Good at Oral and written English
Please send your CV to Human Resource Dept, Schneider Electric
Road #7, An Binh Ward, Bien Hoa Industrial Zone I, Bien Hoa City, Dong Nai Province
via email: ***************@[protected info] before 30 July 2012
for further info: http://www.[protected info].vn
Main responsibilities:
- Accounting document filling
- Support in report, payable, cash Requirement
- Fresh graduated major in Accounting, Finance
- Basic English and computer software
2. MANUFACTURING SENIOR SUPERVISOR
Main responsibilities:
- Responsible for management of all factory's production.
- To drive continuous improvement & resources optimization at the shop floor
- To ensure a safety environment for all employees at shop floor Requirement
- Knowledge on the electro-mechanical / electricity
- Knowledge of Autocad / Coreldraw ...
- Good at MS software, esp Excel
- Trained in Lean / Six sigma methodology
- Fluent in oral and written English.
- Over 30 years old. 3. METHOD ENGINEERING MANAGER
Main responsibilities:
- Fully responsible for Method Engineering of the company including improvement of processes and ensure the good operation of equipment and facilities
- Responsible for the Environment and Safety programs of Method Engineering department
- Lead the deployment of Schneider Production System (all domains People Commitment, Product/Process engineering and Management of Industrial and Logistic Processes).
- Implement the "continuous improvement" culture through Value Stream Mapping, MTM, Lean
- Implement the culture of Short Interval Management in order to escalate on time every
- Ensure the efficiency of manual assembly (KPIs = KE, IE and DLP)
- Deploy best practices in assembly in order to ensure high quality products but also a safe working environment for operators.
Requirement
- Graduate from Technical University (major: electro-mechanical or plastic material)
- At least 7 years practical experience in advanced manufacturing field. Prior experience as a Industrialization manager desired.
- Fluent in oral and written English.
- Expert in of moulding and extrusion
- Strong understanding for electric-mechanical
- Strong understanding in Lean and production system principles
- Green Belt certified
- Understanding of financial indicators
4. SENIOR INDUSTRIAL ENGINEER
Main responsibilities:
- Assist the ME Manager with staff the decisions to meet the goals and objectives of the department.
- Develop, motivate, and challenge employees to perform to their full potential.
- To drive continuous process improvement and cost reduction program
- Process Robustness (PFMEA, PCP, Process mapping)
- Value Stream Mapping
- Assembly Changeover
- Line & Layout Design
- Work Instruction / MI
- LADM
- MTM
- Kanban system
Requirement
- Graduate from Technical (major: electro-mechanical or plastic material)
- At least 5 years practical experience in advanced manufacturing field. Minimum 3 years experience on similar position
- Fluent in oral and written English
- Proven track record in driving corrective actions and implementing change
- Excellent communication skills with high potential in Lean, 6 sigma, leadership, process development are required
- Extensive knowledge of Industrial Engineering philosophies and processes
5. PROCESS ENGINEER
Main responsibilities:
- To design Manufacturing processes in compliance to LEAN concepts
- To ensure Manufacturing in trouble-shooting and analysis of issues
- To ensure Continuous Improvement of Processes with Six Sigma, Lean Manufacturing projects
- To deploy SPS (Schneider Production System) Deployment for the site
- To deploy & coach shop floor on lean manufacturing best practices
Requirement
- Industrial Engineering or Electro-Mechanical , Industrial Engineering Background is preferable
- Knowledge on the electro-mechanical
- Knowledge of Autocad is advantage
- Aware of the Lean Manufacturing and Six Sigma are advantage
6. PRODUCT ENGINEER
Main responsibilities:
- Be responsible related for modification stamping die to ensure its best performance in relation with Product Development Department and also quality of products.
- Support product transfer as: Material Specification of raw material, design and qualification of packaging, qualify metal part and its drawing, trial run product transfer and new product.
- In relation with Product Development Department to carry out all the modifications on the products and also parts to ensure its best performance.
Requirement
- Graduated from Technical University (major: mechanical).
- At least 2 years experience in designing relation mechanic
- Strong understanding product related in assembly
- Use fluently computer, AutoCAD and Corel as mandatory
- Good at Oral and written English
Please send your CV to Human Resource Dept, Schneider Electric
Road #7, An Binh Ward, Bien Hoa Industrial Zone I, Bien Hoa City, Dong Nai Province
via email: ***************@[protected info] before 30 July 2012
for further info: http://www.[protected info].vn
Thông tin chung
- Ngày hết hạn: 19/09/2021
- Thu nhập: Thỏa thuận
Việc làm tương tự
CÔNG TY CP XUẤT NHẬP KHẨU VI NA ĐẠI VIỆT
Từ 8 triệu VND
05/10/2024
Hồ Chí Minh, Đồng Nai
CôngTy Cổ Phần VINH NAM
10 - 14 triệu VNĐ
29/10/2024
Hồ Chí Minh, Đồng Nai
CÔNG TY TNHH THỰC PHẨM THÁI SƠN
6 triệu - 8 triệu
24/10/2024
Hồ Chí Minh, Đồng Nai
hỗ trợ doanh nghiệp
Giải thưởng
của chúng tôi
Top 3
Nền tảng số tiêu biểu của Bộ
TT&TT 2022.
Top 15
Startup Việt xuất sắc 2019 do VNExpress tổ chức.
Top 10
Doanh nghiệp khởi nghiệp sáng tạo Việt Nam - Hội đồng tư vấn kinh doanh ASEAN bình chọn.
Giải Đồng
Sản phẩm công nghệ số Make In Viet Nam 2023.