[Đà Nẵng - Upto $3000] Senior AUTOSAR Automotive Embedded Engineer
Nơi làm việc: Đà Nẵng
Ngành nghề: IT phần mềm, Vận tải - Lái xe/ Tài xế, IT phần cứng/mạng, QA-QC/ Thẩm định/ Giám định, Giao nhận/ Vận chuyển/ Kho bãi
Thu nhập: $1500 - $3000
Hình thức: Toàn thời gian
Ngày đăng: 27/04/2024
Hạn nộp: 09/05/2024
Liên hệ ứng tuyển gọi:
Vị trí công việc này hiện tại đã hết hạn nộp hồ sơ, bạn có thể tham khảo thêm một số công việc liên quan phía dưới
Mô tả công việc
SW-Development Aspect: Responsible for the development of embedded control software for automotive
electronics
• Development of peripherals such as GPIO, Watch Dog, PWM, and ADC, and
communication protocols such as SPI, I2C, and UART
• Based on VECTOR AUTOSAR SIP and DaVinci configuration tool, develop
underlying software modules: RTE interface configuration, COM module, DCM
& DEM configuration and development, NvM network management, I/O driver
development & I/O hardware abstraction layer development, complex driver
development , MCAL configuration, low-level software integration
• CAN/LIN bus development, Ethernet communication bus development
• UDS diagnostic development, network management
SW-Testing Aspect:
• Responsible for Analysis customer testing requirements
• Responsible for the software testing of automotive electronics according to the
ASPICE process
• Responsible for building functional integration test environment
• Write functional test cases
• Responsible for writing test requirements specifications, test cases, test scripts, etc.
• Familiar with CAN/LIN bus protocol and related specifications
• Write Python, CAPL test scripts
• Use VECTOR testing toolchain: CANoe, CANdelaStudio, Diva, vTeststudio and
other tools to analyze and solve problems found in software testing
• Work closely with the software project team to complete the development of the
software
• Reporting to software project manager
electronics
• Development of peripherals such as GPIO, Watch Dog, PWM, and ADC, and
communication protocols such as SPI, I2C, and UART
• Based on VECTOR AUTOSAR SIP and DaVinci configuration tool, develop
underlying software modules: RTE interface configuration, COM module, DCM
& DEM configuration and development, NvM network management, I/O driver
development & I/O hardware abstraction layer development, complex driver
development , MCAL configuration, low-level software integration
• CAN/LIN bus development, Ethernet communication bus development
• UDS diagnostic development, network management
SW-Testing Aspect:
• Responsible for Analysis customer testing requirements
• Responsible for the software testing of automotive electronics according to the
ASPICE process
• Responsible for building functional integration test environment
• Write functional test cases
• Responsible for writing test requirements specifications, test cases, test scripts, etc.
• Familiar with CAN/LIN bus protocol and related specifications
• Write Python, CAPL test scripts
• Use VECTOR testing toolchain: CANoe, CANdelaStudio, Diva, vTeststudio and
other tools to analyze and solve problems found in software testing
• Work closely with the software project team to complete the development of the
software
• Reporting to software project manager
Yêu cầu
• Excellent team spirit
• Project development experience with Infineon, NXP, Renesas and other MCUs
• With CAN/LIN bus, and practical project development experience in diagnosis is
preferred
• Have the ability of code writing, software debugging, verification and development
and testing of embedded software, code review ability, etc., with project experience
in system planning and design, architecture design is preferred
• Knowledge of AutoSAR architecture, ASPICE and ISO2602 functional safety is
preferred for embedded software code development experience
• Familiar with software testing techniques (concepts and tools): static code testing,
dynamic testing (unit, module testing), software integration testing is preferred
• Master the basics of the ASPICE process
• Fluent English speaking and listening skills are Requested
• Handwritten C and C++ programming languages preferred
• Knowledge of CAN/diagnosis or related testing is preferred
• Basic hardware knowledge of embedded systems is preferred
• 3 or more years of relevant work experience in the field of software testing in the
automotive industry
• Project development experience with Infineon, NXP, Renesas and other MCUs
• With CAN/LIN bus, and practical project development experience in diagnosis is
preferred
• Have the ability of code writing, software debugging, verification and development
and testing of embedded software, code review ability, etc., with project experience
in system planning and design, architecture design is preferred
• Knowledge of AutoSAR architecture, ASPICE and ISO2602 functional safety is
preferred for embedded software code development experience
• Familiar with software testing techniques (concepts and tools): static code testing,
dynamic testing (unit, module testing), software integration testing is preferred
• Master the basics of the ASPICE process
• Fluent English speaking and listening skills are Requested
• Handwritten C and C++ programming languages preferred
• Knowledge of CAN/diagnosis or related testing is preferred
• Basic hardware knowledge of embedded systems is preferred
• 3 or more years of relevant work experience in the field of software testing in the
automotive industry
Quyền lợi
Thưởng
15th-Salary Bonus, Performance Bonus
Chăm sóc sức khoẻ
Premium Healthcare Insurance
Khác
Business Trip oversea
15th-Salary Bonus, Performance Bonus
Chăm sóc sức khoẻ
Premium Healthcare Insurance
Khác
Business Trip oversea
Thông tin khác
NGÀY ĐĂNG
[protected info]
CẤP BẬC
Nhân viên
NGÀNH NGHỀ
Công Nghệ Thông Tin/Viễn Thông > Phần Mềm Máy Tính
KỸ NĂNG
Embedded, Automotive, AUTOSAR, Embedded Testing
LĨNH VỰC
Ô tô
NGÔN NGỮ TRÌNH BÀY HỒ SƠ
Tiếng Anh
SỐ NĂM KINH NGHIỆM TỐI THIỂU
Không hiển thị
QUỐC TỊCH
Không hiển thị
Xem thêm
[protected info]
CẤP BẬC
Nhân viên
NGÀNH NGHỀ
Công Nghệ Thông Tin/Viễn Thông > Phần Mềm Máy Tính
KỸ NĂNG
Embedded, Automotive, AUTOSAR, Embedded Testing
LĨNH VỰC
Ô tô
NGÔN NGỮ TRÌNH BÀY HỒ SƠ
Tiếng Anh
SỐ NĂM KINH NGHIỆM TỐI THIỂU
Không hiển thị
QUỐC TỊCH
Không hiển thị
Xem thêm
Việc làm tương tự
Nhân Viên Tester (AppotaPay)
Công ty Cổ Phần APPOTA
Thỏa thuận
Hà Nội, Hồ Chí Minh, Đà Nẵng
03/01/2025
Tester
Công Ty TNHH Hệ Thống Thông Tin FPT - FPT Information System - FPT IS
Thoả thuận
Đà Nẵng
17/11/2024
Manual Tester
CHI NHÁNH CÔNG TY CỔ PHẦN CÔNG NGHỆ VARS VIỆT NAM TẠI ĐÀ NẴNG
Thỏa thuận
Đà Nẵng
25/11/2024
[🇻🇳 Da Nang] TESTER
Công ty Cổ phần Phần mềm VietIS - Vietis Corporation Careers
upto 18.000.000 VNĐ
Đà Nẵng
30/11/2024
[TP.HCM] NHÂN VIÊN TESTER
Công Ty TNHH Thiết Bị Minh Tâm (Mitalab Co., Ltd)
Thỏa thuận
Hồ Chí Minh, Đà Nẵng, Cần Thơ
15/11/2024
Kỹ sư kiểm thử phần mềm
VIETTEL Thái Bình
10,000,000 - 30,000,000
Hà Nội, Hồ Chí Minh, Đà Nẵng
19/12/2024
Vị trí [Đà Nẵng - Upto $3000] Senior AUTOSAR Automotive Embedded Engineer do công ty tuyển dụng tại Đà Nẵng, Joboko tự động tổng hợp mức lương $1500 - $3000, tìm thêm việc làm về [Đà Nẵng - Upto $3000] Senior AUTOSAR Automotive Embedded Engineer hoặc công ty ở các link phía trên
Liên hệ ứng tuyển gọi: