Manufacturing Engineer - Shift Operation IntegratorCông ty TNHH Sản Xuất First Solar Việt Nam
Nơi làm việc: Hồ Chí Minh, Bình Dương
Ngành nghề: IT phần mềm, Điện - Điện tử - Điện lạnh, Thống kê, Sản xuất / Vận hành sản xuất, Kỹ thuật
Thu nhập: Thỏa thuận
Hình thức: Toàn thời gian
Ngày đăng: 05/04/2024
Hạn nộp: 05/07/2024
Vị trí công việc này hiện tại đã hết hạn nộp hồ sơ, bạn có thể tham khảo thêm một số công việc liên quan phía dưới
Mô tả công việc
ppBasic Job Functions:
The specialist is responsible at a crew level for meeting crew Theory of Constraint (TOC) & Operations Command Center (CC) metrics (such as process yields, module efficiency, module wattage, Throughputs, WIP & NCP management) and driving timely corrective actions in closing crew gaps.
Essential Responsibilities:
· Adheres to all safety procedures and 5S standards.
· Abilities to take strategy and convert into actionable deliverables to meet daily, weekly, and monthly P90.
· Is responsible for effective communication, fostering teamwork and cross functional management.
· Monitors crew KPI's for respective areas and take necessary actions, as needed, to identify potential risks to safety, throughput or quality and help define and implement mitigation strategies.
· Coordinates, schedules, and prioritizes production related activities, personnel, projects, planning and other functions within various crews and support departments.
· Leads and drives plant operations action items to closure with functional owners to remove constraints for 24X7 operations. Provide assessment for operation recovery and assignment of headcount and WIP movement.
· Coordinates with functional managers for creation of new change request throughout the 24X7 operation with emphasis on standardized practices to minimize capacity lost.
· Contributes to continuous improvement in safety, quality, and operations.
· Point of contact for coater, submodule or finishing operations.
· First line of defense for device IV/Efficiency and yield issues troubleshooting in shift. Review all key process input and output parameters, commonality study to trigger fast mixing test, and perform next level analysis to isolate the possible contributing process before escalating to engineering.
· Utilizes Theory of Constraints (TOC) methodology to maximize throughput. Monitor and coordinates Work In Process (WIP) optimization between manufacturing units or across different plants in meeting shift Throughput targets. Drive manufacturing execution team and support groups to meet the desired target on Operational Efficiency (OE) and Machine Availability (MA).
· Coordinates and drives respective area tools utilization, availability or cycle time improvement projects or related issues with regards to coater, submodule or finishing operations such as headcount planning and development, material allocation, upgrade activities, ETA execution and yield improvement.
· Effectively utilizes support teams to find root cause and resolve issues to improve safety, quality, and throughput.
· Reviews and approves respective area process change work instructions to ensure manufacturing viability.
· Provides technical support to operations training team for development of training plans and reinforcement of existing procedures./p/p
The specialist is responsible at a crew level for meeting crew Theory of Constraint (TOC) & Operations Command Center (CC) metrics (such as process yields, module efficiency, module wattage, Throughputs, WIP & NCP management) and driving timely corrective actions in closing crew gaps.
Essential Responsibilities:
· Adheres to all safety procedures and 5S standards.
· Abilities to take strategy and convert into actionable deliverables to meet daily, weekly, and monthly P90.
· Is responsible for effective communication, fostering teamwork and cross functional management.
· Monitors crew KPI's for respective areas and take necessary actions, as needed, to identify potential risks to safety, throughput or quality and help define and implement mitigation strategies.
· Coordinates, schedules, and prioritizes production related activities, personnel, projects, planning and other functions within various crews and support departments.
· Leads and drives plant operations action items to closure with functional owners to remove constraints for 24X7 operations. Provide assessment for operation recovery and assignment of headcount and WIP movement.
· Coordinates with functional managers for creation of new change request throughout the 24X7 operation with emphasis on standardized practices to minimize capacity lost.
· Contributes to continuous improvement in safety, quality, and operations.
· Point of contact for coater, submodule or finishing operations.
· First line of defense for device IV/Efficiency and yield issues troubleshooting in shift. Review all key process input and output parameters, commonality study to trigger fast mixing test, and perform next level analysis to isolate the possible contributing process before escalating to engineering.
· Utilizes Theory of Constraints (TOC) methodology to maximize throughput. Monitor and coordinates Work In Process (WIP) optimization between manufacturing units or across different plants in meeting shift Throughput targets. Drive manufacturing execution team and support groups to meet the desired target on Operational Efficiency (OE) and Machine Availability (MA).
· Coordinates and drives respective area tools utilization, availability or cycle time improvement projects or related issues with regards to coater, submodule or finishing operations such as headcount planning and development, material allocation, upgrade activities, ETA execution and yield improvement.
· Effectively utilizes support teams to find root cause and resolve issues to improve safety, quality, and throughput.
· Reviews and approves respective area process change work instructions to ensure manufacturing viability.
· Provides technical support to operations training team for development of training plans and reinforcement of existing procedures./p/p
Yêu cầu
pp*** Education/Experience:
· Minimum Associates degree in technical discipline or 2-5 years First Solar supervisor experience.
· Bachelor's degree in technical discipline preferred or manufacturing experience requirements.
- 2 years manufacturing supervision or engineering experience preferred.
- 2-5 years manufacturing continuous improvement or leadership/management experience in electrical, mechanical, and chemical industrial applications.
· Experience in electrical, mechanical, and chemical industrial applications (work experience or internship).
· Understands and can apply structured problem solving (ex. Green Belt, Kaizen, etc.).
*** Required Skills/Competencies:
· Safety First mindset.
· Basic Data Analysis is preferred.
· Thorough understanding of all production processes and equipment.
· Must be able to work in a team environment.
· Basic problem solving and critical thinking skills is preferred.
· Good written and oral communication skills.
· Knowledge of electrical, mechanical, or chemical systems preferred.
· Basic troubleshooting and problem-solving skills is preferred.
· Proficient in Microsoft Office (Excel, PowerPoint, Words and Outlook).
· Proficient in data mining systems, such as: Report Manager, SAS, TABLEAU, POWER BI and JMP.
· Understanding of production control systems, equipment run-rate, Theory of Constraints, WIP management and floor layout interaction.
· Understanding of direct and indirect material list, consumption POR, replenishment, storage, and tracking system.
· Proven ability to train and develop associates.
· Excellent organizational and planning skills.
· Ability to think outside the box and to develop unique and timely solutions.
· Experience and working knowledge of continuous improvement tools is preferred./p/p
· Minimum Associates degree in technical discipline or 2-5 years First Solar supervisor experience.
· Bachelor's degree in technical discipline preferred or manufacturing experience requirements.
- 2 years manufacturing supervision or engineering experience preferred.
- 2-5 years manufacturing continuous improvement or leadership/management experience in electrical, mechanical, and chemical industrial applications.
· Experience in electrical, mechanical, and chemical industrial applications (work experience or internship).
· Understands and can apply structured problem solving (ex. Green Belt, Kaizen, etc.).
*** Required Skills/Competencies:
· Safety First mindset.
· Basic Data Analysis is preferred.
· Thorough understanding of all production processes and equipment.
· Must be able to work in a team environment.
· Basic problem solving and critical thinking skills is preferred.
· Good written and oral communication skills.
· Knowledge of electrical, mechanical, or chemical systems preferred.
· Basic troubleshooting and problem-solving skills is preferred.
· Proficient in Microsoft Office (Excel, PowerPoint, Words and Outlook).
· Proficient in data mining systems, such as: Report Manager, SAS, TABLEAU, POWER BI and JMP.
· Understanding of production control systems, equipment run-rate, Theory of Constraints, WIP management and floor layout interaction.
· Understanding of direct and indirect material list, consumption POR, replenishment, storage, and tracking system.
· Proven ability to train and develop associates.
· Excellent organizational and planning skills.
· Ability to think outside the box and to develop unique and timely solutions.
· Experience and working knowledge of continuous improvement tools is preferred./p/p
Quyền lợi
Thưởng
Attractive allowance
Xe đưa đón
Shuttle Bus from HCM, Bien Hoa and Binh Duong
Căn-tin
Free lunch
Attractive allowance
Xe đưa đón
Shuttle Bus from HCM, Bien Hoa and Binh Duong
Căn-tin
Free lunch
Thông tin khác
NGÀY ĐĂNG
[protected info]
CẤP BẬC
Nhân viên
NGÀNH NGHỀ
Sản Xuất > Quy Trình & Lắp Ráp
KỸ NĂNG
Troubleshooting Analysis, Data Analysis, English, Communication, Statistical Process Control
LĨNH VỰC
Sản xuất
NGÔN NGỮ TRÌNH BÀY HỒ SƠ
Tiếng Anh
SỐ NĂM KINH NGHIỆM TỐI THIỂU
Không yêu cầu
QUỐC TỊCH
Không hiển thị
Xem thêm
[protected info]
CẤP BẬC
Nhân viên
NGÀNH NGHỀ
Sản Xuất > Quy Trình & Lắp Ráp
KỸ NĂNG
Troubleshooting Analysis, Data Analysis, English, Communication, Statistical Process Control
LĨNH VỰC
Sản xuất
NGÔN NGỮ TRÌNH BÀY HỒ SƠ
Tiếng Anh
SỐ NĂM KINH NGHIỆM TỐI THIỂU
Không yêu cầu
QUỐC TỊCH
Không hiển thị
Xem thêm
Giới thiệu công ty
Công ty TNHH Sản Xuất First Solar Việt Nam
Củ Chi, Ho Chi Minh City, Vietnam
firstsolar.com/
Việc làm tương tự
[Hà Nội | Hồ Chí Minh] Kỹ Sư Cơ Điện
Hawee Group
Thu nhập 13 triệu - 25 triệu VND
Hà Nội, Hồ Chí Minh
21/10/2024
Chuyên viên Phân tích dữ liệu (BA)
BỆNH VIỆN ĐA KHOA QUỐC TẾ SIS CẦN THƠ
Thỏa thuận
Hồ Chí Minh
25/10/2024
Chuyên Viên Phân Tích Dữ Liệu (Data Analyst)
CÔNG TY TNHH VENESA
9 - 16 triệu
Hồ Chí Minh
22/10/2024
Chuyên viên phân tích dữ liệu (Data Analyst)
CÔNG TY TNHH CÔNG NGHỆ B2B
Cạnh tranh
Hồ Chí Minh
19/10/2024
Chuyên Viên Phân Tích Dữ Liệu Biết Tiếng Anh
Công ty TNHH Anta Sports Việt Nam
10 - 15 triệu
Hồ Chí Minh
10/10/2024
[HỒ CHÍ MINH] - NHÂN VIÊN PHÂN TÍCH DỮ LIỆU
Công ty TNHH Đồng Tiến CN TP. Hồ Chí Minh
Thương lượng
Hồ Chí Minh, Đồng Nai
21/10/2024
Chuyên viên Phân Tích Dữ Liệu - Data Analyst (Mảng Market Research)
CÔNG TY TNHH MỘT THÀNH VIÊN CIMIGO
Cạnh tranh
Hồ Chí Minh
18/10/2024
Site Data Analyst / Nhân Viên Phân Tích Dữ Liệu
Camso Việt Nam
Thỏa thuận
Bình Dương, Lai Châu
17/10/2024
Senior Data Analyst (Chuyên Viên Phân Tích Dữ Liệu)
CÔNG TY CỔ PHẦN CÔNG NGHỆ GIÁO DỤC NATIVE X
Thỏa thuận
Hồ Chí Minh
18/10/2024
Chuyên Viên Phân Tích Dữ Liệu - Data Analyst
CÔNG TY TNHH DAY1GROUP
16 Tr - 25 Tr VND
Hồ Chí Minh
20/10/2024
Vị trí Manufacturing Engineer - Shift Operation Integrator do công ty Công ty TNHH Sản Xuất First Solar Việt Nam tuyển dụng tại Hồ Chí Minh, Bình Dương, Joboko tự động tổng hợp mức lương Thỏa thuận, tìm thêm việc làm về Manufacturing Engineer - Shift Operation Integrator hoặc công ty Công ty TNHH Sản Xuất First Solar Việt Nam ở các link phía trên
Giới thiệu công ty
Công ty TNHH Sản Xuất First Solar Việt Nam
Củ Chi, Ho Chi Minh City, Vietnam
firstsolar.com/