Automation EngineerSaint-Gobain Vietnam - Nhà Máy Gyproc
Nơi làm việc: Hồ Chí Minh
Ngành nghề: Điện - Điện tử - Điện lạnh, Thống kê, Sản xuất / Vận hành sản xuất, Kỹ thuật, Khoa học, Cơ khí chế tạo / Điện / Điện tử / Tự động hóa, Cơ khí - Chế tạo
Lương: $700 - $800
Hình thức: Toàn thời gian
Ngày đăng: 06/03/2024
Hạn nộp: 31/03/2024
Vị trí công việc này hiện tại đã hết hạn nộp hồ sơ, bạn có thể tham khảo thêm một số công việc tương tự tại đây:
Mô tả công việc
1. Improve the plant, increase of equipment reliability
-Ensure safe working conditions are designed and standardised into any changes in working practices, new machines and equipment
-Monitor and improve PLC automation and controls to ensure smooth plant operations with minimum breakdowns attributable to electrical, automation and control reasons.
-Monitor and improve WINCC SCADA system to ensure manufacturing team can control manufacturing process with the highest accuracy.
-Provide detailed problem analysis for engineering solutions to maintenance problems in conjunction with production management and operators.
-Provides technical support, troubleshooting, and enhancement of automation-related systems
2. Co-coordinate with other department to works together and ensure achieve target
- Create detailed, descriptive plant shutdown schedules, which secure the total ongoing support and contribution of the plant management team.
- Support the manufacturing team in the review of successful performance and countermeasures.
- Develop and implement energy management systems leading to reductions in operations cost.
- Support the maintenance team in problem analysis, countermeasure and preventive breakdown.
3. Upgrade equipment and system
- Find abnormalities in equipment or system to fix .
- Find weakness of design to improve the equipment and system.
- Manage automation-related projects and provide status reports to plant management. Develop and maintain PLC/HMI systems.
- Responsible for planning, evaluating, organizing, and implementing automation-related projects and initiatives.
4. WCM programme
- Apply WCM basic tool solve problem and lead PM or FI project
-Ensure safe working conditions are designed and standardised into any changes in working practices, new machines and equipment
-Monitor and improve PLC automation and controls to ensure smooth plant operations with minimum breakdowns attributable to electrical, automation and control reasons.
-Monitor and improve WINCC SCADA system to ensure manufacturing team can control manufacturing process with the highest accuracy.
-Provide detailed problem analysis for engineering solutions to maintenance problems in conjunction with production management and operators.
-Provides technical support, troubleshooting, and enhancement of automation-related systems
2. Co-coordinate with other department to works together and ensure achieve target
- Create detailed, descriptive plant shutdown schedules, which secure the total ongoing support and contribution of the plant management team.
- Support the manufacturing team in the review of successful performance and countermeasures.
- Develop and implement energy management systems leading to reductions in operations cost.
- Support the maintenance team in problem analysis, countermeasure and preventive breakdown.
3. Upgrade equipment and system
- Find abnormalities in equipment or system to fix .
- Find weakness of design to improve the equipment and system.
- Manage automation-related projects and provide status reports to plant management. Develop and maintain PLC/HMI systems.
- Responsible for planning, evaluating, organizing, and implementing automation-related projects and initiatives.
4. WCM programme
- Apply WCM basic tool solve problem and lead PM or FI project
Yêu cầu công việc
1. Education : Bachelor's degree in Automation
2. Experience and Knowledge : At least 2 years of working experience :
- Hands-on experience in working on automation & control projects from start to finish, from systems design, programming, integration of systems, I/O checking and commissioning.
- Deep experience about PLC (Mitsubishi, Siemen).
- Set up inverter (ABB, Siemen, Yaskawa,..)
- Good knowledge about operation and setup parameter for combustion system, calcination system
- Awareness of safety
- Training on reacting to emergency cases.
- Training operation procedures, maintaining equipment (PM) and machines of the areas.
- Training check measure, control the operation of equipment, output of the area
4. Others:
- Proficiency in Word, Excel, and Powerpoint are required.
- Good in presentation skill
- Good at English
2. Experience and Knowledge : At least 2 years of working experience :
- Hands-on experience in working on automation & control projects from start to finish, from systems design, programming, integration of systems, I/O checking and commissioning.
- Deep experience about PLC (Mitsubishi, Siemen).
- Set up inverter (ABB, Siemen, Yaskawa,..)
- Good knowledge about operation and setup parameter for combustion system, calcination system
- Awareness of safety
- Training on reacting to emergency cases.
- Training operation procedures, maintaining equipment (PM) and machines of the areas.
- Training check measure, control the operation of equipment, output of the area
4. Others:
- Proficiency in Word, Excel, and Powerpoint are required.
- Good in presentation skill
- Good at English
Quyền lợi được hưởng
Unique Employee Total Rewards
Health Insurance Packages for Employees and Direct Family Members
Designed Personal Training and Career Development
Health Insurance Packages for Employees and Direct Family Members
Designed Personal Training and Career Development
Thông tin khác
Ngày Đăng Tuyển
[protected info]
Cấp Bậc
Nhân viên
Ngành Nghề
Khoa Học & Kỹ Thuật > Kỹ Thuật Điện/Điện Tử
Lĩnh vực
Vật liệu xây dựng
Kỹ Năng
Tự Động Hóa, WinCC, Lập Trình PLC, PLC, Điện
Ngôn Ngữ Trình Bày Hồ Sơ
Bất kỳ
[protected info]
Cấp Bậc
Nhân viên
Ngành Nghề
Khoa Học & Kỹ Thuật > Kỹ Thuật Điện/Điện Tử
Lĩnh vực
Vật liệu xây dựng
Kỹ Năng
Tự Động Hóa, WinCC, Lập Trình PLC, PLC, Điện
Ngôn Ngữ Trình Bày Hồ Sơ
Bất kỳ
Nộp hồ sơ liên hệ
Saint-Gobain Vietnam - Nhà Máy Gyproc
Giới thiệu công ty
Việc làm tương tự
Senior Automation Engineer
CTY TNHH CHẾ TẠO MÁY DƯỢC PHẨM TIẾN TUẤN
20 Tr - 25 Tr VND
Hồ Chí Minh
31/05/2024
Automation Test Engineer (QA/QC/Tester), KMS Solutions
KMS TECHNOLOGY VIETNAM COMPANY LIMITED
Thỏa thuận
Hồ Chí Minh
26/05/2024
Operations Automation Project Engineer
CÔNG TY TNHH SONION VIỆT NAM
Cạnh tranh
Hồ Chí Minh
22/05/2024
QA Automation Engineer
Văn phòng đại diện công ty TNHH tập đoàn GFT
You'll love it
Hà Nội, Hồ Chí Minh
10/06/2024
Senior Quality Control Engineer Automation Test
FIREGROUP technology
Thỏa thuận
Hồ Chí Minh
31/05/2024
Automation Test Engineer, based in Da Nang
KMS TECHNOLOGY VIETNAM COMPANY LIMITED
Thỏa thuận
Hồ Chí Minh
26/05/2024
Vị trí Automation Engineer do công ty Saint-Gobain Vietnam - Nhà Máy Gyproc tuyển dụng tại Hồ Chí Minh, Joboko tự động tổng hợp mức lương $700 - $800, tìm thêm việc làm về Automation Engineer hoặc công ty Saint-Gobain Vietnam - Nhà Máy Gyproc ở các link phía trên
Giới thiệu công ty