Kỹ Sư ĐiệnVUNG ANG II THERMAL POWER LLC
Nơi làm việc: Hà Tĩnh
Ngành nghề: Điện - Điện tử - Điện lạnh, Bảo trì / Sửa chữa, Kỹ thuật, Cơ khí chế tạo / Điện / Điện tử / Tự động hóa
Lương: Cạnh tranh
Hình thức: Toàn thời gian
Ngày đăng: 02/07/2024
Hạn nộp: 02/08/2024
Mô tả công việc
Mô tả Công việc
* Work location: Vung Ang Economic Zone, Ha Tinh Province, Vietnam
* Job type: full time permanent
* Employee type: local Vietnamese
POSITION SUMMARY
Responsible for the maintenance and repairing all electrical systems, devices, apparatus, controls, switches, switchgear, generators, motor control centers, batteries and battery chargers, excitation systems, voltage regulators, protection relay, transformers including wire and cable installations. Support other maintenance groups as required. Maintain manuals, procedures, historical information, CMMS and inspection records ensuring adequate update. Assist in other areas of the plant as assigned.
PRIMARY RESPONSIBILITIES
Duties and responsibilities for this position include but are not limited to the following:
Duties and responsibilities for this position include but are not limited to the following:
Perform maintenance duties in a safe, environmentally friendly and workmanlike manner.
Based on experience, equipment history and O&M manuals establish scope, frequency and method for preventive (systematic and on-condition) and corrective maintenance tasks on plant electrical equipment (generators, excitation and its control systems, GCB, UPS, power transformers, switchgears and motors, etc.).
Specify and procure electrical spares and services as required.
Supervise work on attributed system ensuring safe, effective and efficient implementation of work method statement.
Prepare, maintain and update documentation, reports and CMMS as required.
Perform other comparable and related duties as assigned.
* VAPCO is a fair Employer. We do not require any recruitment fees from the candidate and do not collect applications from broker individuals or organizations who charge commissions/ fees from applicants. We thank you all candidates, but only the shortlisted will be contacted for interviews.
* Candidates are encouraged to visit our website to understand about us.
Duties and responsibilities for this position include but are not limited to the following:
Perform maintenance duties in a safe, environmentally friendly and workmanlike manner.
Based on experience, equipment history and O&M manuals establish scope, frequency and method for preventive (systematic and on-condition) and corrective maintenance tasks on plant electrical equipment (generators, excitation and its control systems, GCB, UPS, power transformers, switchgears and motors, etc.).
Specify and procure electrical spares and services as required.
Supervise work on attributed system ensuring safe, effective and efficient implementation of work method statement.
Prepare, maintain and update documentation, reports and CMMS as required.
Perform other comparable and related duties as assigned.
* Work location: Vung Ang Economic Zone, Ha Tinh Province, Vietnam
* Job type: full time permanent
* Employee type: local Vietnamese
POSITION SUMMARY
Responsible for the maintenance and repairing all electrical systems, devices, apparatus, controls, switches, switchgear, generators, motor control centers, batteries and battery chargers, excitation systems, voltage regulators, protection relay, transformers including wire and cable installations. Support other maintenance groups as required. Maintain manuals, procedures, historical information, CMMS and inspection records ensuring adequate update. Assist in other areas of the plant as assigned.
PRIMARY RESPONSIBILITIES
Duties and responsibilities for this position include but are not limited to the following:
Duties and responsibilities for this position include but are not limited to the following:
Perform maintenance duties in a safe, environmentally friendly and workmanlike manner.
Based on experience, equipment history and O&M manuals establish scope, frequency and method for preventive (systematic and on-condition) and corrective maintenance tasks on plant electrical equipment (generators, excitation and its control systems, GCB, UPS, power transformers, switchgears and motors, etc.).
Specify and procure electrical spares and services as required.
Supervise work on attributed system ensuring safe, effective and efficient implementation of work method statement.
Prepare, maintain and update documentation, reports and CMMS as required.
Perform other comparable and related duties as assigned.
* VAPCO is a fair Employer. We do not require any recruitment fees from the candidate and do not collect applications from broker individuals or organizations who charge commissions/ fees from applicants. We thank you all candidates, but only the shortlisted will be contacted for interviews.
* Candidates are encouraged to visit our website to understand about us.
Duties and responsibilities for this position include but are not limited to the following:
Perform maintenance duties in a safe, environmentally friendly and workmanlike manner.
Based on experience, equipment history and O&M manuals establish scope, frequency and method for preventive (systematic and on-condition) and corrective maintenance tasks on plant electrical equipment (generators, excitation and its control systems, GCB, UPS, power transformers, switchgears and motors, etc.).
Specify and procure electrical spares and services as required.
Supervise work on attributed system ensuring safe, effective and efficient implementation of work method statement.
Prepare, maintain and update documentation, reports and CMMS as required.
Perform other comparable and related duties as assigned.
Yêu cầu công việc
Yêu Cầu Công Việc
EDUCATION, EXPERIENCE AND GENERAL REQUIREMENTS
Electrical Bachelor Engineering Degree required.
Minimum 3 years' experience in plant maintenance engineering or equivalent industrial Environment including maintenance engineering of plant electrical equipment and maintenance work planning.
Available to work overtime, weekends and shift work if necessary.
Ability to conduct Planning and problem analysis regarding EE Part of the supercritical coal power plant.
Interpret PLC ladder drawing, Electrical single line drawing and Electrical circuits.
Familiar with P&ID drawing, Visual inspection and periodic maintenance for local electrical facilities such as GIS, Power transformers, Circuit breaker (GCB, VCB, ACB), Motor control center (MCC), Isolated Phase Bus, MV/LV switchgear, MOV, Electrical Actuator, Exciter controller, Generator, UPS, AVR etc.
Prefer a certificate of completion on PLC systems, Computer science, Rotating machinery vibration theory and Thermal dynamic theory.
Prefer a certificate of completion on Environmental facilities such as FGD, SCR, EP (Electrical Precipitation).
Prefer a certificate of completion for training courses on Super critical Coal power plant such as Turbine, Boiler, Generator or Electrical Facilities of power plant.
Prefer a certificate of completion for training courses on Electrical facilities such as Protection Relay System, Transformer, Motor, Circuit Breaker, Generator, AVR, Exciter, UPS, MOV.
Possess advanced level communications skills in English (written and verbal) and be computer literate. Able to communicate using advanced vocabulary.
CV in English
EDUCATION, EXPERIENCE AND GENERAL REQUIREMENTS
Electrical Bachelor Engineering Degree required.
Minimum 3 years' experience in plant maintenance engineering or equivalent industrial Environment including maintenance engineering of plant electrical equipment and maintenance work planning.
Available to work overtime, weekends and shift work if necessary.
Ability to conduct Planning and problem analysis regarding EE Part of the supercritical coal power plant.
Interpret PLC ladder drawing, Electrical single line drawing and Electrical circuits.
Familiar with P&ID drawing, Visual inspection and periodic maintenance for local electrical facilities such as GIS, Power transformers, Circuit breaker (GCB, VCB, ACB), Motor control center (MCC), Isolated Phase Bus, MV/LV switchgear, MOV, Electrical Actuator, Exciter controller, Generator, UPS, AVR etc.
Prefer a certificate of completion on PLC systems, Computer science, Rotating machinery vibration theory and Thermal dynamic theory.
Prefer a certificate of completion on Environmental facilities such as FGD, SCR, EP (Electrical Precipitation).
Prefer a certificate of completion for training courses on Super critical Coal power plant such as Turbine, Boiler, Generator or Electrical Facilities of power plant.
Prefer a certificate of completion for training courses on Electrical facilities such as Protection Relay System, Transformer, Motor, Circuit Breaker, Generator, AVR, Exciter, UPS, MOV.
Possess advanced level communications skills in English (written and verbal) and be computer literate. Able to communicate using advanced vocabulary.
CV in English
Quyền lợi được hưởng
Xe đưa đón
Chế độ thưởng
Chăm sóc sức khỏe
Đào tạo
Nghỉ phép năm
Chế độ thưởng
Chăm sóc sức khỏe
Đào tạo
Nghỉ phép năm
Thông tin khác
Bằng cấp:
Đại học
Độ tuổi:
Không giới hạn tuổi
Lương:
Cạnh tranh
Đại học
Độ tuổi:
Không giới hạn tuổi
Lương:
Cạnh tranh
Nộp hồ sơ liên hệ
VUNG ANG II THERMAL POWER LLC
Giới thiệu công ty
VUNG ANG II THERMAL POWER LLC việc làm
Vung Ang Economic Zone, Ky Loi Commune, Ky Anh Town, Ha Tinh Province, Viet Nam
Quy mô: Từ 101 - 500 nhân viên
Việc làm tương tự
Kỹ Sư Cơ Điện ( Nam )
Công Ty TNHH một thành viên chế biến chất thải công nghiệp hà tĩnh
12 - 15 triệu
Hà Tĩnh
24/07/2024
Thợ Hàn - Thợ Phụ Lương 15 - 20 Triệu
Công Ty Cổ Phần Cơ Khí Xây Dựng An Trí
15 - 20 triệu VNĐ
Hà Tĩnh, Nghệ An, Quảng Bình, Quảng Trị, Thanh Hóa, Nước Ngoài
05/08/2024
Chuyên viên M&E
Công ty cổ phần Tập đoàn Thái Bình Dương
Thương lượng
Hà Tĩnh, Quảng Bình
10/08/2024
tuyển lao đông làm điện nước dân dụng
điện nước quách gia
Từ 12 - đến 18 triệu
Hà Nội, Hải Phòng, Bắc Giang, Bắc Kạn, Bạc Liêu, Bắc Ninh, Cao Bằng, Điện Biên, Hà Giang, Hà Nam, Hà Tĩnh, Hải Dương, Hưng Yên, Lai Châu, Lạng Sơn, Lào Cai, Nam Định
11/07/2024
Kỹ Sư Kinh Doanh- Sales Engineer Toàn Quốc
Công ty cổ phần dịch vụ Thiết bị công nghiệp Hoàng Linh
Từ 12 Triệu trở lên
Hải Phòng, Bình Thuận, Hà Tĩnh, Ninh Thuận, Quảng Ngãi
10/07/2024
Vị trí Kỹ Sư Điện do công ty VUNG ANG II THERMAL POWER LLC tuyển dụng tại Hà Tĩnh, Joboko tự động tổng hợp mức lương Cạnh tranh, tìm thêm việc làm về Kỹ Sư Điện hoặc công ty VUNG ANG II THERMAL POWER LLC ở các link phía trên
Giới thiệu công ty
VUNG ANG II THERMAL POWER LLC việc làm
Vung Ang Economic Zone, Ky Loi Commune, Ky Anh Town, Ha Tinh Province, Viet Nam
Quy mô: Từ 101 - 500 nhân viên