1. MÔ TẢ CÔNG VIỆC BẢO TRÌ /MAINTENANCE DESCRIPTION
1.1 Sửa chữa hệ thống máy móc/ Repair of mechanical systems
- Tham gia hỗ trợ phát hiện hư hỏng và nguyên nhân để đưa ra giải pháp khắc phục , tránh lặp lại lỗi.
Provide support in the reparation of machine breakdowns, carry out the analysis of the failure and apply effective countermeasures to prevent the reoccurrence of the failure.
- Thường xuyên kiểm tra hoạt động của hệ thống điện điều khiển để kịp thời phát hiện những hư hỏng, tiến hành sửa chữa nhanh chóng để không làm ảnh hưởng đến quá trình sản xuất chung của toàn nhà máy
Regularly check the operation of the electric control system to timely detect the damage, to make repairs quickly so as not to affect the overall production process of the whole plant.
- Lưu nội dung xử lý sự cố vào sổ ghi chép của bộ phận
Record the problems, root cause of the problems and action taken in daily of maintenance
1.2 Bảo trì, bảo dưỡng máy móc hệ thống nhà máy/ Maintenance machinery systems of plant.
- Theo dõi chương trình bảo trì phòng ngừa bao gồm việc bảo trì dự phòng và tồn kho linh kiện thay thế để cho máy móc và thiết bị luôn hoạt động tốt.
Monitoring preventive maintenance program including preventive maintenance and spare parts inventory to keep machinery and equipment in good working order.
- Đảm bảo giám sát và thúc giục việc
sửa chữa máy móc nhanh chóng làm giảm thiểu thời gian dừng máy
Ensures monitoring and prompting for quick repair of machines to reduce downtime
- Thường xuyên kiểm tra tình hình hoạt động của hệ thống thiết bị, máy móc
Regularly checking the operation of the system of equipment and machinery
- Tìm hiểu nguyên nhân của những sự cố thường xảy ra và tìm hướng xử lý triệt để để không làm ảnh hưởng đến tiến độ sản xuất của nhà máy
Find out the causes of common problems and find a way to handle thoroughly so as not to affect the production schedule of the plant.
- Theo dõi vệc thực hiện việc bảo trì, bảo dưỡng các máy móc, thiết bị trong nhà máy theo kế hoạch đã được duyệt (Vệ sinh, bơm dầu mỡ, thay mới linh kiện hư hỏng...)
Carry out maintenance of the machines and equipment in the factory as per the approved plan (cleaning, grease pump, replacement of damaged parts ...)
- Hỗ trợ nhân viên bộ phận thực hiện việc lắp đặt các thiết bị máy móc mới cho nhà máy
Assist to install new equipment for the plant
- Đảm bảo các phần mềm PLC các máy được lưu trữ.
Ensure all PLC program were backed up
- Kiểm tra, bảo quản các công cụ dụng cụ, thiết bị phục vụ công việc được giao
Check and preserve tools, tools and equipment for the assigned work
- Chủ động đề xuất những giải pháp nâng cao hiệu quả công việc cho nhân và hiệu suất của máy móc
Proactively propose solutions to improve work efficiency for maintenance workers and machine efficiency.
- Xây dựng kế hoạch bảo trì (năm) cho tất cả các loại máy móc
Preparation of maintenance plan (yearly) for all types of machinery
- Tổ chức thực hiện và nghiệm thu kết quả bảo trì của các nhà thầu.
Implementation and acceptance of maintenance results of sub-contractor
2. Các công việc khác/ Other jobs
- Hỗ trợ lắp đặt các hệ thống tiện ích của nhà máy
Support for installation of utility systems of the plant
- Theo dõi và kiểm tra định kỳ hệ thống
phòng cháy chữa cháy (PCCC)
Observe and check firefighting and fire alarm system
- Hỗ trợ đào tạo nhân viên mới cho bộ phận
Assist in training new employees for the department
- Theo dõi 5S của bộ phận bảo trì, chịu trách nhiệm quản lý kho bảo trì
Follow 5S of the maintenance department, maintenance's warehouse management
- Hỗ trợ và đảm bảo giấy tờ liên quan tuân thủ theo kiểm tra nội bộ và bên ngoài
Provide support and ensure all document compline in internal and external audit
- Sắp xếp lịch làm đi ca cho nhân viên
Arrange working shifts for operator
- Thực hiện các công việc khác khi có yêu cầu từ cấp trên
Carry out other duties as required by the supervisor
- Tham gia các khóa bồi dưỡng, tập huấn nâng cao trình độ cho
nhân viên bảo trìAttending training courses to improve the level of maintenance staff
- Cập nhật báo cáo đầy đủ, chính xác các vấn đề phát sinh
Updating data full fill, exactly issues to report.
- Tuân thủ trình tự yêu cầu và các yêu cầu về độ sạch sẽ, an toàn và môi trường
Comply with the required order and cleanliness, safety and environmental requirements
2. QUYỀN HẠN/ AUTHORITIES
- Sử dụng các nguồn lực liên quan có sẵn trong phạm vi quản lý để thực hiện tốt các vai trò và nhiệm vụ được giao.
Utilize available resources within management scope to handle assigned roles & responsibilities.
- Đề xuất ý tưởng và tham gia triển khai các dự án cải thiện hiệu quả hoạt động chung của bộ phận/ nhà máy.
Propose ideas & involve in deloyment of projects which improve operational efficiency.