Process EngineerOrgano (Vietnam) - Global Engineering Center
Nơi làm việc: Hồ Chí Minh, Đà Nẵng
Ngành nghề: Sản xuất / Vận hành sản xuất, Marketing - PR, Kỹ thuật, Công nghiệp, Marketing / Truyền thông / Quảng cáo, Thiết kế đồ họa - Mỹ thuật
Lương: $500 - $1000
Hình thức: Toàn thời gian
Ngày đăng: 22/03/2024
Hạn nộp: 21/04/2024
Vị trí công việc này hiện tại đã hết hạn nộp hồ sơ, bạn có thể tham khảo thêm một số công việc tương tự tại đây:
Mô tả công việc
- Responsible for detailed design, including piping route planning, skid design, and equipment design, based on Organo Group's basic plan and design.
- Understanding of Specification sheet, P&ID, Layout, related process documents, and structure drawing, and piping design piping.
- Work as a process designer, supporting mechanical design, managing P3D, and developing modernized engineering.
- Create P&ID by Plant3D & Engineering data under senior instruction and make RFQ.
- Prepare for equipment selection calculations, design strength calculations, design specifications, Line code and spec, and piping pressure loss calculation.
- Create Layout under senior instruction.
- Provide instructions for outsourcing.
- Create technical documents and suggestions for standardization and work efficiency improvement.
- Other related tasks as assigned.
- Understanding of Specification sheet, P&ID, Layout, related process documents, and structure drawing, and piping design piping.
- Work as a process designer, supporting mechanical design, managing P3D, and developing modernized engineering.
- Create P&ID by Plant3D & Engineering data under senior instruction and make RFQ.
- Prepare for equipment selection calculations, design strength calculations, design specifications, Line code and spec, and piping pressure loss calculation.
- Create Layout under senior instruction.
- Provide instructions for outsourcing.
- Create technical documents and suggestions for standardization and work efficiency improvement.
- Other related tasks as assigned.
Yêu cầu công việc
Knowledge of engineering:
- Ability to comprehend and create P&ID.
- Ability to read and understand technical documents and drawings in English.
- Knowledge of process and process control.
- Familiarity with standards of materials used in structural design, storage tanks, vessels, and piping (JIS or equivalent standards).
- Knowledge of piping drawings and isometric drawings, and the ability to create manufacturing drawings. Experience with JIS and PVC piping is an advantage.
- Knowledge of hydraulic calculations, valve and pump selection, and experience in creating process documents and drawings.
- Knowledge of simulation work such as fluid analysis.
Character:
- Highly motivated and hardworking with good leadership.
- Excellent interpersonal communication.
- Ability to work independently and in a team.
- Logical thinking and explanation.
Experience:
- Prefer candidates with over 2 years of EPC project experience in Process, and T&C positions across various industries, including water treatment, oil, and gas.
- Basic understanding of industrial standards, materials, P&ID, piping diagrams, isometric drawings, manufacturing drawings, hydraulic calculations, pump and valve selection, and familiarity with creating process documents/drawings is required. Experience with JIS and PVC piping is preferred.
- Preference will be given to candidates with prior work experience in Japanese companies.
Language:
- Ability to communicate in English
- Having proficiency in the Japanese language is an advantage
Technical competencies:
- Familiar with MS Office
- Familiar with process software tools like Plant 3D P&ID and AVEVA P&ID.
- Preference will be given to candidates who are familiar with AutoCAD 2D & 3D, Plant 3D, or Cardworks Plant.
- Preferential treatment for familiarity with programming such as Python, and API programming such as Forge, Power BI, and VBA.
Bachelor's degree: Bachelor's degree in Chemical, Process, Environmental, or Biological Engineering
Gender: Any
Age: From 24 to 30 years old
Others: Opportunity to go overseas for a business trip for around 1 year
- Ability to comprehend and create P&ID.
- Ability to read and understand technical documents and drawings in English.
- Knowledge of process and process control.
- Familiarity with standards of materials used in structural design, storage tanks, vessels, and piping (JIS or equivalent standards).
- Knowledge of piping drawings and isometric drawings, and the ability to create manufacturing drawings. Experience with JIS and PVC piping is an advantage.
- Knowledge of hydraulic calculations, valve and pump selection, and experience in creating process documents and drawings.
- Knowledge of simulation work such as fluid analysis.
Character:
- Highly motivated and hardworking with good leadership.
- Excellent interpersonal communication.
- Ability to work independently and in a team.
- Logical thinking and explanation.
Experience:
- Prefer candidates with over 2 years of EPC project experience in Process, and T&C positions across various industries, including water treatment, oil, and gas.
- Basic understanding of industrial standards, materials, P&ID, piping diagrams, isometric drawings, manufacturing drawings, hydraulic calculations, pump and valve selection, and familiarity with creating process documents/drawings is required. Experience with JIS and PVC piping is preferred.
- Preference will be given to candidates with prior work experience in Japanese companies.
Language:
- Ability to communicate in English
- Having proficiency in the Japanese language is an advantage
Technical competencies:
- Familiar with MS Office
- Familiar with process software tools like Plant 3D P&ID and AVEVA P&ID.
- Preference will be given to candidates who are familiar with AutoCAD 2D & 3D, Plant 3D, or Cardworks Plant.
- Preferential treatment for familiarity with programming such as Python, and API programming such as Forge, Power BI, and VBA.
Bachelor's degree: Bachelor's degree in Chemical, Process, Environmental, or Biological Engineering
Gender: Any
Age: From 24 to 30 years old
Others: Opportunity to go overseas for a business trip for around 1 year
Quyền lợi được hưởng
ORGANO (VIETNAM) - Global Engineering Center
ORGANO (VIETNAM) - Global Engineering Center
ORGANO (VIETNAM) - Global Engineering Center
ORGANO (VIETNAM) - Global Engineering Center
ORGANO (VIETNAM) - Global Engineering Center
Thông tin khác
Ngày Đăng Tuyển
22/03/2024
Cấp Bậc
Nhân viên
Ngành Nghề
Thiết Kế > Thiết Kế Công Nghiệp/Kỹ Thuật
Lĩnh vực
Dịch vụ môi trường/Chất thải
Kỹ Năng
Xử Lý Nước Thải, Process Engineer, AutoCAD, P&ID Design, Process Control
Ngôn Ngữ Trình Bày Hồ Sơ
Tiếng Anh
22/03/2024
Cấp Bậc
Nhân viên
Ngành Nghề
Thiết Kế > Thiết Kế Công Nghiệp/Kỹ Thuật
Lĩnh vực
Dịch vụ môi trường/Chất thải
Kỹ Năng
Xử Lý Nước Thải, Process Engineer, AutoCAD, P&ID Design, Process Control
Ngôn Ngữ Trình Bày Hồ Sơ
Tiếng Anh
Nộp hồ sơ liên hệ
Organo (Vietnam) - Global Engineering Center
Giới thiệu công ty
Việc làm tương tự
Kỹ Sư Quy Trình (Process Engineer)
CÔNG TY TNHH ĐIỆN KHÍ QUỐC QUANG (VIỆT NAM)
Cạnh tranh
Đà Nẵng, Quảng Nam
31/05/2024
Senior Principle Supplier Process Engineer (PCB Fabrication)
Dell Global Business Center
Thương lượng
Hà Nội, Hồ Chí Minh
15/05/2024
Process and Equipment Engineer AI/ML Intern for EPX
CÔNG TY TNHH INTEL PRODUCTS VIỆT NAM
Thỏa thuận
Hồ Chí Minh
29/05/2024
Process Engineer Intern (Training and LEAN)
CÔNG TY TNHH INTEL PRODUCTS VIỆT NAM
Thỏa thuận
Hồ Chí Minh
29/05/2024
TEST Process and Equipment Engineer Intern
CÔNG TY TNHH INTEL PRODUCTS VIỆT NAM
Thỏa thuận
Hồ Chí Minh
29/05/2024
Process Equip Engineer Intern for CAM
CÔNG TY TNHH INTEL PRODUCTS VIỆT NAM
Thỏa thuận
Hồ Chí Minh
26/05/2024
Process Equip Engineer for AI/ML Intern
CÔNG TY TNHH INTEL PRODUCTS VIỆT NAM
Thỏa thuận
Hồ Chí Minh
26/05/2024
Vị trí Process Engineer do công ty Organo (Vietnam) - Global Engineering Center tuyển dụng tại Hồ Chí Minh, Đà Nẵng, Joboko tự động tổng hợp mức lương $500 - $1000, tìm thêm việc làm về Process Engineer hoặc công ty Organo (Vietnam) - Global Engineering Center ở các link phía trên
Giới thiệu công ty