Process EngineerCông ty TNHH Cicor Anam
Nơi làm việc: Bình Dương
Ngành nghề: Điện - Điện tử - Điện lạnh, Sản xuất / Vận hành sản xuất, Marketing - PR, Marketing / Truyền thông / Quảng cáo, Cơ khí chế tạo / Điện / Điện tử / Tự động hóa
Lương: Cạnh tranh
Hình thức: Toàn thời gian
Ngày đăng: 21/03/2024
Hạn nộp: 30/04/2024
Vị trí công việc này hiện tại đã hết hạn nộp hồ sơ, bạn có thể tham khảo thêm một số công việc tương tự tại đây:
Mô tả công việc
Mô tả Công việc
1. New product introduction (NPI): Design for Manufacturability (DFM) Review and provide feedback to customer, create process flowchart, Failure Mode and Effects Analysis (FMEA), define critical process parameters, select appropriate equipment, and establish efficient assembly methods. Create and maintain Bills of Materials, build instructions, conducting process trials, and addressing any issues or challenges that arise during the NPI build.
2. Process Analysis: Analyze existing manufacturing processes to identify areas for improvement in terms of efficiency, productivity, quality, and cost-effectiveness. This includes studying process flows, conducting time studies, and gathering data to identify bottlenecks and opportunities for optimization.
3. Process Documentation: Create and maintain detailed documentation of manufacturing processes, including process flow diagrams, standard operating procedures (SOPs), work instructions, and equipment specifications. Ensure that documentation is up to date and accessible to relevant stakeholders.
4. Component evaluation: Participate in evaluating the raw material and new supplier/ vendor with SQE, review and propose to customer for alternative component.
5. Process Improvement: Collaborate with cross-functional teams, including production, engineering, and quality assurance, to identify and implement process improvements. This may involve proposing and testing new techniques, technologies, or equipment to enhance productivity, reduce cycle times, minimize waste, or improve product quality.
6. Data Analysis: Collect, analyze, and interpret data related to manufacturing processes to monitor performance, identify trends, and drive decision-making. Use statistical tools and software to analyze data and generate reports, enabling informed process optimization and problem-solving.
7. Troubleshooting and Problem Solving: Investigate and resolve issues related to manufacturing processes, equipment failures, and product quality deviations. Work closely with production and maintenance teams to identify root causes, implement corrective actions, and prevent future occurrences.
8. Continuous Improvement: Actively participate in continuous improvement initiatives, such as Lean Manufacturing or Six Sigma, to promote a culture of continuous improvement. Contribute to projects aimed at reducing waste, improving efficiency, and enhancing overall process performance.
9. Collaboration and Communication: Collaborate with cross-functional teams, including engineers, operators, technicians, and management, to ensure effective communication and alignment on process improvement initiatives. Share findings, recommendations, and progress updates with relevant stakeholders.
1. New product introduction (NPI): Design for Manufacturability (DFM) Review and provide feedback to customer, create process flowchart, Failure Mode and Effects Analysis (FMEA), define critical process parameters, select appropriate equipment, and establish efficient assembly methods. Create and maintain Bills of Materials, build instructions, conducting process trials, and addressing any issues or challenges that arise during the NPI build.
2. Process Analysis: Analyze existing manufacturing processes to identify areas for improvement in terms of efficiency, productivity, quality, and cost-effectiveness. This includes studying process flows, conducting time studies, and gathering data to identify bottlenecks and opportunities for optimization.
3. Process Documentation: Create and maintain detailed documentation of manufacturing processes, including process flow diagrams, standard operating procedures (SOPs), work instructions, and equipment specifications. Ensure that documentation is up to date and accessible to relevant stakeholders.
4. Component evaluation: Participate in evaluating the raw material and new supplier/ vendor with SQE, review and propose to customer for alternative component.
5. Process Improvement: Collaborate with cross-functional teams, including production, engineering, and quality assurance, to identify and implement process improvements. This may involve proposing and testing new techniques, technologies, or equipment to enhance productivity, reduce cycle times, minimize waste, or improve product quality.
6. Data Analysis: Collect, analyze, and interpret data related to manufacturing processes to monitor performance, identify trends, and drive decision-making. Use statistical tools and software to analyze data and generate reports, enabling informed process optimization and problem-solving.
7. Troubleshooting and Problem Solving: Investigate and resolve issues related to manufacturing processes, equipment failures, and product quality deviations. Work closely with production and maintenance teams to identify root causes, implement corrective actions, and prevent future occurrences.
8. Continuous Improvement: Actively participate in continuous improvement initiatives, such as Lean Manufacturing or Six Sigma, to promote a culture of continuous improvement. Contribute to projects aimed at reducing waste, improving efficiency, and enhancing overall process performance.
9. Collaboration and Communication: Collaborate with cross-functional teams, including engineers, operators, technicians, and management, to ensure effective communication and alignment on process improvement initiatives. Share findings, recommendations, and progress updates with relevant stakeholders.
Yêu cầu công việc
Yêu Cầu Công Việc
1. Bachelor's degree in Engineering, preferably in Electronic Engineering, or a related field.
2. Experience working in EMS company.
3. At least an additional 2 years related to PCBA engineering experience or box-build parts assembly such as metal part, plastic part and cable.
4. Poka-Yoke mindset and concept.
5. Solid understanding of engineering principles and product development concepts.
6. Familiarity with product testing methodologies and data analysis.
7. Strong analytical and problem-solving abilities.
8. Ability to work well in a team environment and contribute to cross-functional projects.
9. Adaptability and willingness to learn new technologies and tools.
10. Basic understanding of quality control principles and standards.
11. Proficiency in Microsoft Office applications.
12. Proficiency in the English language (reading, writing, speaking and comprehension).
13. Self-motivated with a strong desire for professional growth and development
1. Bachelor's degree in Engineering, preferably in Electronic Engineering, or a related field.
2. Experience working in EMS company.
3. At least an additional 2 years related to PCBA engineering experience or box-build parts assembly such as metal part, plastic part and cable.
4. Poka-Yoke mindset and concept.
5. Solid understanding of engineering principles and product development concepts.
6. Familiarity with product testing methodologies and data analysis.
7. Strong analytical and problem-solving abilities.
8. Ability to work well in a team environment and contribute to cross-functional projects.
9. Adaptability and willingness to learn new technologies and tools.
10. Basic understanding of quality control principles and standards.
11. Proficiency in Microsoft Office applications.
12. Proficiency in the English language (reading, writing, speaking and comprehension).
13. Self-motivated with a strong desire for professional growth and development
Quyền lợi được hưởng
Laptop
Chế độ bảo hiểm
Du Lịch
Du lịch nước ngoài
Đồng phục
Chế độ thưởng
Chăm sóc sức khỏe
Đào tạo
Tăng lương
Công tác phí
Nghỉ phép năm
CLB thể thao
Chế độ bảo hiểm
Du Lịch
Du lịch nước ngoài
Đồng phục
Chế độ thưởng
Chăm sóc sức khỏe
Đào tạo
Tăng lương
Công tác phí
Nghỉ phép năm
CLB thể thao
Thông tin khác
Bằng cấp:
Đại học
Độ tuổi:
25 - 35
Lương:
Cạnh tranh
Đại học
Độ tuổi:
25 - 35
Lương:
Cạnh tranh
Nộp hồ sơ liên hệ
Công ty TNHH Cicor Anam
Giới thiệu công ty
Công ty TNHH Cicor Anam việc làm
15 Đường số 4, Khu công nghiệp Việt Nam Singapore thị xã Thuận An Tỉnh Bình Dương 0
Quy mô: Từ 101 - 500 nhân viên
Việc làm tương tự
Process Engineer (New Factory)
Công ty TNHH Panasonic Electric Works Việt Nam
Thương lượng
Bình Dương
07/06/2024
Process Engineer (PE/ TPM/ CI / LEAN/ Six Sigma)
Huhtamaki Vietnam
15 Tr - 30 Tr VND
Bình Dương
08/06/2024
Packaging Engineer
East West Industries Vietnam LLC.
Cạnh tranh
Hồ Chí Minh, Bình Dương, Đồng Nai
23/05/2024
Product Engineer - Frame
Chi Nhánh Công Ty TNHH Kỹ Nghệ Gỗ Hoa Nét - Mỹ Phước 3
Thỏa thuận
Bình Dương
31/05/2024
Maintenance Equipment Engineer
CÔNG TY TNHH LEGO MANUFACTURING VIỆT NAM
Thỏa thuận
Bình Dương, Lai Châu
11/06/2024
Automation Design Engineer
Chi Nhánh Công Ty TNHH Kỹ Nghệ Gỗ Hoa Nét - Mỹ Phước 3
Thỏa thuận
Bình Dương
12/06/2024
Vị trí Process Engineer do công ty Công ty TNHH Cicor Anam tuyển dụng tại Bình Dương, Joboko tự động tổng hợp mức lương Cạnh tranh, tìm thêm việc làm về Process Engineer hoặc công ty Công ty TNHH Cicor Anam ở các link phía trên
Giới thiệu công ty
Công ty TNHH Cicor Anam việc làm
15 Đường số 4, Khu công nghiệp Việt Nam Singapore thị xã Thuận An Tỉnh Bình Dương 0
Quy mô: Từ 101 - 500 nhân viên