Quality Assurance auditorCARTER'S VIETNAM CO., LTD.
Nơi làm việc: Đà Nẵng, Long An, Thanh Hóa, Thừa Thiên Huế
Ngành nghề: Kế toán, Thống kê, Sản xuất / Vận hành sản xuất, Thu Ngân, Xây dựng, Dệt may - Da giày, QA-QC/ Thẩm định/ Giám định
Lương: Negotiable
Hình thức: Toàn thời gian
Ngày đăng: 19/03/2024
Hạn nộp: 18/04/2024
Vị trí công việc này hiện tại đã hết hạn nộp hồ sơ, bạn có thể tham khảo thêm một số công việc tương tự tại đây:
Mô tả công việc
HOW YOU'LL MAKE AN IMPACT:
The Quality Assurance Auditor role at Carter's is for candidates who hold themselves to a higher standard, believe in doing the right thing the first time, and bring the best of their abilities & experiences to their daily work routine.
This role typically reports to the Sr. QA Manager who is based in Hong Kong and is open to working with our supplier in and around the region (Danang, Hue, and Thanh Hoa), He/she should be open to working on-site, remotely & willing to travel.
REQUIREMENTS
1. SUPPLIER PERFORMANCE MANAGEMENT AND SUPPLIER DEVELOPMENT
• Make sure the KPI of the Observed Quality Level (OQL) is maintained below the given target with stability to meet the defined Accepted Quality Level (AQL).
• Monitor the effectiveness of the supplier's Quality Management System (QMS) and provide insight to the line manager for necessary development areas.
• Monitor supplier's top three defects and relevant reports, root cause analysis, and corrective actions then involve optimizing with proper coaching and guiding to all stakeholders.
• Work with line manager to initiate and follow up CAPs for necessary improvement areas for quality, product safety, process management, and general.
2. WORKLOAD MANAGEMENT OF ASSIGNED FACTORIES
• Monitor the workload of assigned factories on a weekly and monthly basis and update the line manager on the feasibility of executing assigned work.
• Make sure all necessary events of PPM, Inline audits, and Final Inspections are executed on time.
3. MONITOR CERTIFIED AUDITORS (CA) and CA PROGRAMS IN ASSIGNED FACTORIES
• Monitor the quantity and quality of the work of the CA's.
• Train and Coach CAs from time to time to update them on all of Carter's ongoing changes.
• Follow up all report's updates in Inspectorio by CAs and make sure all is done right and on time.
• Work closely with CAs and guide them to follow Carter's standards.
• Constantly update the line manager about the CAs status of assigned factories.
4. PRE-PRODUCTION MEETING (PPM)
• Monitor factory production and schedule to make sure PPM is carried out for all necessary styles based on risk assessment.
• Make sure all product safety concerns/elements (Prong ring fasteners, buttons, buttons, studs, bows, draw codes, appliques etc.) are addressed to meet standards at the pre-production level to secure bulk production and its consistency.
5. FINAL (AQL) SHIPMENT PRODUCT AUDITS AND CORRELATION AUDITS
• Review factory audit scheduling requests to confirm schedule planning and carry out at least 20% of Correlation audits against the total CA audits.
• Both the product-construction audit and packaging audit are to be completed; combined PO/line audits are to be done as much as possible depending on factory production. Ensure same-day notification of any failed audit to designated CGS management.
• Involve following up on all rechecks for failed audits and ensuring rechecks are done in the right manner with the right corrective actions and product quality is not compromised.
• Execute all system updates on time.
6. CROSS-FUNCTIONAL ACTIVITIES
• Upon request from the line, the manager extends cooperation to work collaboratively with the Corporate Social Responsibility (CSR) team, the Manufacturing Excellence team (ME), the Product integrity team, and the sourcing/merchandising team.
• Hand-select bulk garments in the factory for any special purpose as identified by CGS Management.
• Review and respond to e-mails that impact respective PO/Lines or factories covered.
• Report important observations or changes to factory situations regarding management, customer base, equipment investments, capacity expansion, etc.
• Be flexible to meet assignments and travel requirements to support CGS Quality Objectives.
The Quality Assurance Auditor role at Carter's is for candidates who hold themselves to a higher standard, believe in doing the right thing the first time, and bring the best of their abilities & experiences to their daily work routine.
This role typically reports to the Sr. QA Manager who is based in Hong Kong and is open to working with our supplier in and around the region (Danang, Hue, and Thanh Hoa), He/she should be open to working on-site, remotely & willing to travel.
REQUIREMENTS
1. SUPPLIER PERFORMANCE MANAGEMENT AND SUPPLIER DEVELOPMENT
• Make sure the KPI of the Observed Quality Level (OQL) is maintained below the given target with stability to meet the defined Accepted Quality Level (AQL).
• Monitor the effectiveness of the supplier's Quality Management System (QMS) and provide insight to the line manager for necessary development areas.
• Monitor supplier's top three defects and relevant reports, root cause analysis, and corrective actions then involve optimizing with proper coaching and guiding to all stakeholders.
• Work with line manager to initiate and follow up CAPs for necessary improvement areas for quality, product safety, process management, and general.
2. WORKLOAD MANAGEMENT OF ASSIGNED FACTORIES
• Monitor the workload of assigned factories on a weekly and monthly basis and update the line manager on the feasibility of executing assigned work.
• Make sure all necessary events of PPM, Inline audits, and Final Inspections are executed on time.
3. MONITOR CERTIFIED AUDITORS (CA) and CA PROGRAMS IN ASSIGNED FACTORIES
• Monitor the quantity and quality of the work of the CA's.
• Train and Coach CAs from time to time to update them on all of Carter's ongoing changes.
• Follow up all report's updates in Inspectorio by CAs and make sure all is done right and on time.
• Work closely with CAs and guide them to follow Carter's standards.
• Constantly update the line manager about the CAs status of assigned factories.
4. PRE-PRODUCTION MEETING (PPM)
• Monitor factory production and schedule to make sure PPM is carried out for all necessary styles based on risk assessment.
• Make sure all product safety concerns/elements (Prong ring fasteners, buttons, buttons, studs, bows, draw codes, appliques etc.) are addressed to meet standards at the pre-production level to secure bulk production and its consistency.
5. FINAL (AQL) SHIPMENT PRODUCT AUDITS AND CORRELATION AUDITS
• Review factory audit scheduling requests to confirm schedule planning and carry out at least 20% of Correlation audits against the total CA audits.
• Both the product-construction audit and packaging audit are to be completed; combined PO/line audits are to be done as much as possible depending on factory production. Ensure same-day notification of any failed audit to designated CGS management.
• Involve following up on all rechecks for failed audits and ensuring rechecks are done in the right manner with the right corrective actions and product quality is not compromised.
• Execute all system updates on time.
6. CROSS-FUNCTIONAL ACTIVITIES
• Upon request from the line, the manager extends cooperation to work collaboratively with the Corporate Social Responsibility (CSR) team, the Manufacturing Excellence team (ME), the Product integrity team, and the sourcing/merchandising team.
• Hand-select bulk garments in the factory for any special purpose as identified by CGS Management.
• Review and respond to e-mails that impact respective PO/Lines or factories covered.
• Report important observations or changes to factory situations regarding management, customer base, equipment investments, capacity expansion, etc.
• Be flexible to meet assignments and travel requirements to support CGS Quality Objectives.
Yêu cầu công việc
Must have:
• University Graduates
• Worked in Quality Function for over 10 years in Vietnam.
• Handled Children's wear
• Capability of managing the vendors independently
• Production management skills to be able to escalate on-time delivery issues to a dedicated sourcing office.
• Good communication skills (in both local languages & English)
• Willing to travel
• University Graduates
• Worked in Quality Function for over 10 years in Vietnam.
• Handled Children's wear
• Capability of managing the vendors independently
• Production management skills to be able to escalate on-time delivery issues to a dedicated sourcing office.
• Good communication skills (in both local languages & English)
• Willing to travel
Quyền lợi được hưởng
13th payment
Premium Health care plan for employees and family
Annual Leave, Paid sick leave
Premium Health care plan for employees and family
Annual Leave, Paid sick leave
Thông tin khác
Posted Date
19/03/2024
Job Level
Experienced (non-manager)
Job Function
Manufacturing > Quality Assurance/Quality Control/Quality Management
Industry
Textiles/Garments/Footwear
Skill
MS Office, QA, Manage Vendors, English, QMS
Preferred Language
English
19/03/2024
Job Level
Experienced (non-manager)
Job Function
Manufacturing > Quality Assurance/Quality Control/Quality Management
Industry
Textiles/Garments/Footwear
Skill
MS Office, QA, Manage Vendors, English, QMS
Preferred Language
English
Nộp hồ sơ liên hệ
CARTER'S VIETNAM CO., LTD.
Giới thiệu công ty
Việc làm tương tự
Nhân viên kiểm soát thu hoạch gà tại trang trại
Công Ty TNHH Japfa Comfeed Việt Nam
13 Triệu - 15 Triệu VNĐ
Hà Nội, Hải Phòng, Thái Nguyên, Thanh Hóa, Yên Bái
04/06/2024
Process Quality Assurance ( PQA Fresher )
Công ty Cổ phần NTQ Solution
4 - 6 triệu
Đà Nẵng
09/06/2024
[HCM, FF] Collaborator, Quality Assurance
Tập Đoàn Game Garena Vietnam
Theo thỏa thuận
Hà Nội, Hồ Chí Minh, Đà Nẵng, Bà Rịa - Vũng Tàu, Kiên Giang, Lào Cai, Quảng Ngãi, Vĩnh Phúc
22/05/2024
Process Quality Assurance
Công Ty Cổ Phần NCCPLUS Việt Nam
Thoả thuận
Hà Nội, Hồ Chí Minh, Đà Nẵng, Khác
02/06/2024
Quality Control Inspector
CÔNG TY CỔ PHẦN HÀNG KHÔNG VIETJET - VIETJET AIR
Negotiate
Hà Nội, Hồ Chí Minh, Đà Nẵng, Khánh Hòa
02/07/2024
Nhân Viên Đảm Bảo Chất Lượng (QA)
Công Ty CP Nhựa Quốc Tế KSVN
Thoả thuận
Hà Nội, Hà Nam, Hưng Yên, Ninh Bình, Thanh Hóa, Khác
21/06/2024
QC Supervisor ( Product Quality Control )
CÔNG TY TNHH VIỆT NAM NISSHIN TECHNOMIC
Thỏa thuận
Đồng Nai, Long An
10/06/2024
Kỹ Sư Đảm Bảo Chất Lượng (QA)
Công Ty Cổ Phần K Products
10 - 12 triệu
Đà Nẵng, Quảng Nam
17/06/2024
Nhân Viên Kiểm Soát Chất Lượng (QA/QC) - Thực Phẩm
CÔNG TY CỔ PHẦN BẾP HOA SEN NHƯ KHUÊ
Thỏa thuận
Long An
26/05/2024
Vị trí Quality Assurance auditor do công ty CARTER'S VIETNAM CO., LTD. tuyển dụng tại Đà Nẵng, Long An, Thanh Hóa, Thừa Thiên Huế, Joboko tự động tổng hợp mức lương Negotiable, tìm thêm việc làm về Quality Assurance Auditor hoặc công ty CARTER'S VIETNAM CO., LTD. ở các link phía trên
Giới thiệu công ty