- Chi tiết công việc
- Giới thiệu công ty
Vị trí công việc này hiện tại đã hết hạn nộp hồ sơ, bạn có thể tham khảo thêm một số công việc liên quan phía dưới
Mô tả công việc
Job Details
Position: R&D Engineer
Job Code: 63035
Responsibility
Employees will be assigned to 3 departments as below:
(1) Electric/Electronic Device parts Dept.
(2) Material and Mechanical parts Dept.
(3) Production Transfer Dept.
Overall duties are:
Work and support R&D team in Japan and Thailand to determine the specification of parts that are used in the production line:
(1) Electric/Electronic Device parts Dept.
- Electronic parts: PCB, Capacitors, IC,...
- Electric parts: Motor, Remote controller, Wire harness,...
(2) Material and Mechanical parts Dept.
- Mechanical parts: Compressor, Heat Exchanger, Fan,..
- Material: Copper, Aluminum, Steel, Plastic,...
(3) Production Transfer Dept.
Transfer the Air-conditioner new product specification to manufacture at Vietnam factory.
- Working location: My Hao, Hung Yen
- Monthly Salary: 340-1300(USD)
Position: R&D Engineer
Job Code: 63035
Responsibility
Employees will be assigned to 3 departments as below:
(1) Electric/Electronic Device parts Dept.
(2) Material and Mechanical parts Dept.
(3) Production Transfer Dept.
Overall duties are:
Work and support R&D team in Japan and Thailand to determine the specification of parts that are used in the production line:
(1) Electric/Electronic Device parts Dept.
- Electronic parts: PCB, Capacitors, IC,...
- Electric parts: Motor, Remote controller, Wire harness,...
(2) Material and Mechanical parts Dept.
- Mechanical parts: Compressor, Heat Exchanger, Fan,..
- Material: Copper, Aluminum, Steel, Plastic,...
(3) Production Transfer Dept.
Transfer the Air-conditioner new product specification to manufacture at Vietnam factory.
- Working location: My Hao, Hung Yen
- Monthly Salary: 340-1300(USD)
Yêu cầu
Requirements
- Age: From 23 - 45 years old. Gender: Any
- Language:
+ English - More than Conversational - Good at communication skill
+ Japanese is preferable
- Education: From Bachelor degree in (1) Electrical Engineering, Electronic Engineering, Mechatronic Engineering / (2) Mechanical Engineering, Material Engineering, Mechatronic Engineering / (3) Mechanical Engineering, Electrical Engineering, Industrial Engineering or any relevant fields
- Experience:
+ For Junior Level: From 1 - 3 years working experience
+ For Senior Level: From 3 years working experience upward
(1) R&D Engineer in Electric/Electronic Device parts Dept
**Have good knowledge and experience in Electronic or electric parts development, testing, production or any other relevant fields**
+ Design and specification of electric parts used in air-conditioners (such as PCB, motor, capacitor, relay, solenoid valve, electric wire, etc.)
+ Electrical/Electronic parts testing, reliability testing, and related statistical calculation
+ Electrical parts production process, supplier factory audits and have knowledge about statistical process control.
+ Preparation of FMEA and FTA documents for analyzing change points of Electric/Electronic parts
+ Electric/Electronic suppliers and how to contact with those suppliers
(2) Mechanical part development, testing, production.
**Have good knowledge and experience in Mechanical part development, testing, production or any other relevant fields**
+ Air-conditioning Mechanical parts (such as Compressor, Heat Exchanger, Fan etc.) and Material (such as Copper, Aluminium, Steel, Plastic, etc.) design and specification
+ Mechanical parts and Material testing as well as reliability testing
+ Mechanical parts and Material production process, supplier factory audits and have knowledge about statistical process control.
+ Preparation of FMEA and FTA documents for analyzing change points of Mechanical parts and Material
+ Mechanical parts and Material suppliers and how to contact with those suppliers
(3) Product development, project management
** Have good knowledge and experience in product development, project management or any other relevant fields**
+ Air-conditioner, Electric appliance or Automotive product design
+ Engineering Drawing and Product specification.
+ Manufacturing process and assembly method
+ Project management to control the project overall schedule strictly and run effectively
NOTICE:
Only shortlisted candidates will be approached by RGF's consultant. Your resumes will be recorded in our system and you will receive our Job Introduction Auto-email with suitable jobs in the coming time. Please check your email regularly to get our vacant job. Thanks so much!
- Age: From 23 - 45 years old. Gender: Any
- Language:
+ English - More than Conversational - Good at communication skill
+ Japanese is preferable
- Education: From Bachelor degree in (1) Electrical Engineering, Electronic Engineering, Mechatronic Engineering / (2) Mechanical Engineering, Material Engineering, Mechatronic Engineering / (3) Mechanical Engineering, Electrical Engineering, Industrial Engineering or any relevant fields
- Experience:
+ For Junior Level: From 1 - 3 years working experience
+ For Senior Level: From 3 years working experience upward
(1) R&D Engineer in Electric/Electronic Device parts Dept
**Have good knowledge and experience in Electronic or electric parts development, testing, production or any other relevant fields**
+ Design and specification of electric parts used in air-conditioners (such as PCB, motor, capacitor, relay, solenoid valve, electric wire, etc.)
+ Electrical/Electronic parts testing, reliability testing, and related statistical calculation
+ Electrical parts production process, supplier factory audits and have knowledge about statistical process control.
+ Preparation of FMEA and FTA documents for analyzing change points of Electric/Electronic parts
+ Electric/Electronic suppliers and how to contact with those suppliers
(2) Mechanical part development, testing, production.
**Have good knowledge and experience in Mechanical part development, testing, production or any other relevant fields**
+ Air-conditioning Mechanical parts (such as Compressor, Heat Exchanger, Fan etc.) and Material (such as Copper, Aluminium, Steel, Plastic, etc.) design and specification
+ Mechanical parts and Material testing as well as reliability testing
+ Mechanical parts and Material production process, supplier factory audits and have knowledge about statistical process control.
+ Preparation of FMEA and FTA documents for analyzing change points of Mechanical parts and Material
+ Mechanical parts and Material suppliers and how to contact with those suppliers
(3) Product development, project management
** Have good knowledge and experience in product development, project management or any other relevant fields**
+ Air-conditioner, Electric appliance or Automotive product design
+ Engineering Drawing and Product specification.
+ Manufacturing process and assembly method
+ Project management to control the project overall schedule strictly and run effectively
NOTICE:
Only shortlisted candidates will be approached by RGF's consultant. Your resumes will be recorded in our system and you will receive our Job Introduction Auto-email with suitable jobs in the coming time. Please check your email regularly to get our vacant job. Thanks so much!
Quyền lợi
Chế độ bảo hiểm
Du Lịch
Chế độ thưởng
Chăm sóc sức khỏe
Đào tạo
Tăng lương
Du Lịch
Chế độ thưởng
Chăm sóc sức khỏe
Đào tạo
Tăng lương
Thông tin khác
Nơi làm việc:
Hưng Yên
Cấp bậc:
Nhân viên
Kinh nghiệm: 1 - 3 Năm
Lương: 340
-
1.300
USD
Ngành nghề: Cơ khí / Ô tô / Tự động hóa, Bảo trì / Sửa chữa
Hết hạn nộp: 24/09/2021
Hưng Yên
Cấp bậc:
Nhân viên
Kinh nghiệm: 1 - 3 Năm
Lương: 340
-
1.300
USD
Ngành nghề: Cơ khí / Ô tô / Tự động hóa, Bảo trì / Sửa chữa
Hết hạn nộp: 24/09/2021
Thông tin chung
- Ngày hết hạn: 24/09/2021
- Thu nhập: 340 - 1300 USD
Giới thiệu công ty
Công ty chưa cập nhật thông tin....
Quy mô công ty
Từ 26 - 100 nhân viên
Việc làm tương tự
Công Ty Cổ Phần Tập Đoàn Bia Rượu Nước Giải Khát Hưng Yên - Hà Nội
10 - 15 triệu
31/10/2024
Hưng Yên
Công ty Cổ phần Nhựa Á Đông
12 Tr - 22 Tr VND
31/10/2024
Hưng Yên
Công ty Cổ phần Nhựa Á Đông
35 Tr - 50 Tr VND
31/10/2024
Hưng Yên
CÔNG TY CỔ PHẦN HAPLAST
Thỏa thuận
21/11/2024
Hà Nội, Hưng Yên
CÔNG TY CỔ PHẦN HAPLAST
Cạnh tranh
27/10/2024
Hà Nội, Hưng Yên
CÔNG TY CỔ PHẦN TẬP ĐOÀN NAGAKAWA
10 triệu - 13 triệu
20/10/2024
Hưng Yên
hỗ trợ doanh nghiệp
Giải thưởng
của chúng tôi
Top 3
Nền tảng số tiêu biểu của Bộ
TT&TT 2022.
Top 15
Startup Việt xuất sắc 2019 do VNExpress tổ chức.
Top 10
Doanh nghiệp khởi nghiệp sáng tạo Việt Nam - Hội đồng tư vấn kinh doanh ASEAN bình chọn.
Giải Đồng
Sản phẩm công nghệ số Make In Viet Nam 2023.