Electrical Leader (For Thermal Power Plant)VUNG ANG II THERMAL POWER LLC
Nơi làm việc: Hà Tĩnh
Ngành nghề: Điện - Điện tử - Điện lạnh, Sản xuất / Vận hành sản xuất, Bảo trì / Sửa chữa, Cơ khí chế tạo / Điện / Điện tử / Tự động hóa
Thu nhập: Cạnh tranh
Hình thức: Toàn thời gian
Ngày đăng: 01/11/2024
Hạn nộp: 17/12/2024
Mô tả công việc
* Work location: Vung Ang Economic Zone, Ha Tinh Province, Vietnam
* Job type: full time permanent
* Employee type: local Vietnamese
POSITION SUMMARY
Maintenance and repairs of Coal handling/Ash handling systems and related auxiliary mechanical systems and equipment to ensure safe, reliable and efficient plant operation. Based on gained experience, O&M manuals and procedures will be able to understand failure symptoms and repair accordingly.
PRIMARY RESPONSIBILITIES
Duties and responsibilities for this position include but are not limited to the following:
- Promote and enforce safe, environmentally friendly and workmanlike maintenance practices within the section and supervised contractors.
- Ensure consistent improvement of electrical maintenance across the plant systems, guaranteeing continuous improvement of plant reliability and availability.
- Promote team development and training. Develop required procedures to ensure the established maintenance strategy is known and implemented. Provide leadership and job coordination on critical projects.
- Assist in high level maintenance planning and budgeting, assuming co-responsibility for approved plan and budget.
- Perform other comparable and related duties as assigned.
* VAPCO is a fair Employer. We do not require any recruitment fees from the candidate and do not collect applications from broker individuals or organizations who charge commissions/ fees from applicants. We thank you all candidates, but only the shortlisted will be contacted for interviews.
* Candidates are encouraged to visit our website to understand about us.
* Job type: full time permanent
* Employee type: local Vietnamese
POSITION SUMMARY
Maintenance and repairs of Coal handling/Ash handling systems and related auxiliary mechanical systems and equipment to ensure safe, reliable and efficient plant operation. Based on gained experience, O&M manuals and procedures will be able to understand failure symptoms and repair accordingly.
PRIMARY RESPONSIBILITIES
Duties and responsibilities for this position include but are not limited to the following:
- Promote and enforce safe, environmentally friendly and workmanlike maintenance practices within the section and supervised contractors.
- Ensure consistent improvement of electrical maintenance across the plant systems, guaranteeing continuous improvement of plant reliability and availability.
- Promote team development and training. Develop required procedures to ensure the established maintenance strategy is known and implemented. Provide leadership and job coordination on critical projects.
- Assist in high level maintenance planning and budgeting, assuming co-responsibility for approved plan and budget.
- Perform other comparable and related duties as assigned.
* VAPCO is a fair Employer. We do not require any recruitment fees from the candidate and do not collect applications from broker individuals or organizations who charge commissions/ fees from applicants. We thank you all candidates, but only the shortlisted will be contacted for interviews.
* Candidates are encouraged to visit our website to understand about us.
Yêu cầu
EDUCATION, EXPERIENCE AND GENERAL REQUIREMENTS
- Electrical or electronic Bachelor Engineering Degree is required.
- Minimum 10 years' experience in electrical maintenance supervision and management or equivalent industrial environment role, 3 of which must be on a management role.
- Available to work overtime and/or weekends if required.
- Ability to conduct Planning and problem analysis regarding Generator and electrical facilities of the coal power plant.
- Ability to Interpret Electrical drawing, P&ID drawing, and the Result of diagnosis of electrical/electromechanical troubles.
- Familiar with P&ID drawing, Visual inspection and periodic maintenance for local electrical facilities such as GIS, Power transformers, Circuit breaker (GCB, VCB, ACB), Motor control center (MCC), Isolated Phase Bus, MV/LV switchgear, MOV, Electrical Actuator, Exciter controller, Generator, UPS, AVR etc.
- Prefer a certificate of completion on PLC systems, Computer science, Thermal dynamic theory, Rotating machinery vibration theory and coal management.
- Prefer a certificate of completion on Environmental facilities such as FGD, SCR, EP (Electrical Precipitation).
- Prefer a certificate of completion for the training course on the routine or preventive maintenance in coal boiler power plant.
- Prefer a certificate of completion for training courses on Electrical facilities such as Generator, Exciter, Motor, Proection Relay, Circuit Breaker, Transformer, UPS, MOV.
- Possess business level communications skills in English (written and verbal) and be computer literate. Able to communicate/discuss any topic in the business environment
- Electrical or electronic Bachelor Engineering Degree is required.
- Minimum 10 years' experience in electrical maintenance supervision and management or equivalent industrial environment role, 3 of which must be on a management role.
- Available to work overtime and/or weekends if required.
- Ability to conduct Planning and problem analysis regarding Generator and electrical facilities of the coal power plant.
- Ability to Interpret Electrical drawing, P&ID drawing, and the Result of diagnosis of electrical/electromechanical troubles.
- Familiar with P&ID drawing, Visual inspection and periodic maintenance for local electrical facilities such as GIS, Power transformers, Circuit breaker (GCB, VCB, ACB), Motor control center (MCC), Isolated Phase Bus, MV/LV switchgear, MOV, Electrical Actuator, Exciter controller, Generator, UPS, AVR etc.
- Prefer a certificate of completion on PLC systems, Computer science, Thermal dynamic theory, Rotating machinery vibration theory and coal management.
- Prefer a certificate of completion on Environmental facilities such as FGD, SCR, EP (Electrical Precipitation).
- Prefer a certificate of completion for the training course on the routine or preventive maintenance in coal boiler power plant.
- Prefer a certificate of completion for training courses on Electrical facilities such as Generator, Exciter, Motor, Proection Relay, Circuit Breaker, Transformer, UPS, MOV.
- Possess business level communications skills in English (written and verbal) and be computer literate. Able to communicate/discuss any topic in the business environment
Quyền lợi
13th Salary payment
Premium Healhcare for you
15 days annual leave per year
Accommodation
Premium Healhcare for you
15 days annual leave per year
Accommodation
Thông tin khác
Thị xã Kỳ Anh,
Hà Tĩnh
Hà Tĩnh
Giới thiệu công ty
VUNG ANG II THERMAL POWER LLC việc làm
Vung Ang Economic Zone, Ky Loi Commune, Ky Anh Town, Ha Tinh Province, Viet Nam
Quy mô: Từ 101 - 500 nhân viên
Việc làm tương tự
Control Room Operator (BLR, TBN) (For Thermal Power Plant)
VUNG ANG II THERMAL POWER LLC
Cạnh tranh
Hà Tĩnh
17/12/2024
Turbine Leader (Thermal Power Plant, in Ha Tinh)
VUNG ANG II THERMAL POWER LLC
Cạnh tranh
Hà Tĩnh
17/12/2024
Vị trí Electrical Leader (For Thermal Power Plant) do công ty VUNG ANG II THERMAL POWER LLC tuyển dụng tại Hà Tĩnh, Joboko tự động tổng hợp mức lương Cạnh tranh, tìm thêm việc làm về Electrical Leader (For Thermal Power Plant) hoặc công ty VUNG ANG II THERMAL POWER LLC ở các link phía trên
Giới thiệu công ty
VUNG ANG II THERMAL POWER LLC việc làm
Vung Ang Economic Zone, Ky Loi Commune, Ky Anh Town, Ha Tinh Province, Viet Nam
Quy mô: Từ 101 - 500 nhân viên