I&C Engineer (For Thermal Power Plant)
VUNG ANG II THERMAL POWER LLC
Địa điểm làm việc: Hà Tĩnh
Hết hạn: 17/12/2024
- Chi tiết công việc
- Giới thiệu công ty
Thu nhập: Cạnh tranh
Loại hình: Toàn thời gian
Chức vụ: Nhân viên
Kinh nghiệm: 3 năm
Mô tả công việc
* Work location: Vung Ang Economic Zone, Ha Tinh Province, Vietnam
* Job type: full time permanent
* Employee type: local Vietnamese
POSITION SUMMARY
- Responsible for installation, programming, troubleshooting, upkeep and repair of plant control systems and components of all technologies (pneumatic, electric, electronic, hydraulic, mechanical, etc.) including data collection, transmission, and processing within plant sensors, devices, computers, and control systems in the control room and elsewhere in the plant. Responsible for calibrating all meters, transmitters, gauges, flowmeters, and other electrical and pneumatic devices. Responsible for maintenance of the plant's DCS system and other control loops for plant processes. Works closely with operations staff and other plant engineers. Maintain manuals, procedures, historical information, CMMS and inspection records ensuring adequate update. Assist in other areas of the plant as assigned.
PRIMARY RESPONSIBILITIES
Duties and responsibilities for this position include but are not limited to the following:
- Perform maintenance duties in a safe, environmentally friendly and workmanlike manner.
- Based on experience, equipment history and O&M manuals establish scope, frequency and method for preventive and corrective maintenance tasks on I&C (turbine) and related control equipment.
- Specify and procure I&C (turbine) spares and services as required.
- Supervise work on attributed system ensuring safe, effective and efficient implementation of work method statement.
- Prepare, maintain and update documentation, reports and CMMS as required.
- Perform other comparable and related duties as assigned.
* VAPCO is a fair Employer. We do not require any recruitment fees from the candidate and do not collect applications from broker individuals or organizations who charge commissions/ fees from applicants. We thank you all candidates, but only the shortlisted will be contacted for interviews.
* Candidates are encouraged to visit our website to understand about us.
* Job type: full time permanent
* Employee type: local Vietnamese
POSITION SUMMARY
- Responsible for installation, programming, troubleshooting, upkeep and repair of plant control systems and components of all technologies (pneumatic, electric, electronic, hydraulic, mechanical, etc.) including data collection, transmission, and processing within plant sensors, devices, computers, and control systems in the control room and elsewhere in the plant. Responsible for calibrating all meters, transmitters, gauges, flowmeters, and other electrical and pneumatic devices. Responsible for maintenance of the plant's DCS system and other control loops for plant processes. Works closely with operations staff and other plant engineers. Maintain manuals, procedures, historical information, CMMS and inspection records ensuring adequate update. Assist in other areas of the plant as assigned.
PRIMARY RESPONSIBILITIES
Duties and responsibilities for this position include but are not limited to the following:
- Perform maintenance duties in a safe, environmentally friendly and workmanlike manner.
- Based on experience, equipment history and O&M manuals establish scope, frequency and method for preventive and corrective maintenance tasks on I&C (turbine) and related control equipment.
- Specify and procure I&C (turbine) spares and services as required.
- Supervise work on attributed system ensuring safe, effective and efficient implementation of work method statement.
- Prepare, maintain and update documentation, reports and CMMS as required.
- Perform other comparable and related duties as assigned.
* VAPCO is a fair Employer. We do not require any recruitment fees from the candidate and do not collect applications from broker individuals or organizations who charge commissions/ fees from applicants. We thank you all candidates, but only the shortlisted will be contacted for interviews.
* Candidates are encouraged to visit our website to understand about us.
Yêu cầu
EDUCATION, EXPERIENCE AND GENERAL REQUIREMENTS
- Electrical, electronic, information, mechanical, chemical or similar Engineering Bachelor Degree required.
- Minimum 3 years' experience in plant maintenance engineering or equivalent industrial environment including maintenance engineering of plant I&C(turbine) equipment and maintenance work planning.
- Available to work overtime, weekends and shift work if necessary.
- Interpret DCS logic drawing, P&I drawing, PLC ladder drawing and Electrical single line drawing
- Familiar with P&ID drawing, Calibration and periodic maintenance for local instruments and commonly used monitoring system such as Furnace monitoring system, Vibration analysis, transmitters, etc.
- Ability to use instrument equipment such as Calibrator, Tester, Oscilloscope, Recorder.
- Prefer a certificate of completion related to DCS, TCS, PLC Systems, Computer application system.
- Prefer a certificate of completion on the training course related to O&M for super critical coal power plant.
- Prefer a certificate of completion for training courses on Process Control such as PID tuning, the basic principle of instrument sensors and the basic measuring theory of local instruments.
- Possess advanced level communications skills in English (written and verbal) and be computer literate. Able to communicate using advanced vocabularies.
- Electrical, electronic, information, mechanical, chemical or similar Engineering Bachelor Degree required.
- Minimum 3 years' experience in plant maintenance engineering or equivalent industrial environment including maintenance engineering of plant I&C(turbine) equipment and maintenance work planning.
- Available to work overtime, weekends and shift work if necessary.
- Interpret DCS logic drawing, P&I drawing, PLC ladder drawing and Electrical single line drawing
- Familiar with P&ID drawing, Calibration and periodic maintenance for local instruments and commonly used monitoring system such as Furnace monitoring system, Vibration analysis, transmitters, etc.
- Ability to use instrument equipment such as Calibrator, Tester, Oscilloscope, Recorder.
- Prefer a certificate of completion related to DCS, TCS, PLC Systems, Computer application system.
- Prefer a certificate of completion on the training course related to O&M for super critical coal power plant.
- Prefer a certificate of completion for training courses on Process Control such as PID tuning, the basic principle of instrument sensors and the basic measuring theory of local instruments.
- Possess advanced level communications skills in English (written and verbal) and be computer literate. Able to communicate using advanced vocabularies.
Quyền lợi
13th Salary payment
Premium Healhcare for you
15 days annual leave per year
Accommodation
Premium Healhcare for you
15 days annual leave per year
Accommodation
Thông tin khác
Thị xã Kỳ Anh,
Hà Tĩnh
Hà Tĩnh
Thông tin chung
- Thu nhập: Cạnh tranh
Cách thức ứng tuyển
Ứng viên nộp hồ sơ trực tuyến bằng cách bấm nút Ứng tuyển bên dưới:
Hạn nộp: 17/12/2024
Giới thiệu công ty
Xem trang công ty
Công ty chưa cập nhật thông tin....
Quy mô công ty
Từ 101 - 500 nhân viên
Việc làm tương tự
công ty dịch vụ mobifone khu vực 6 - cn tổng công ty viễn thông mobifone
10 - 25 triệu
30/11/2024
Hà Tĩnh, Nghệ An, Quảng Bình, Thanh Hóa
VUNG ANG II THERMAL POWER LLC
Cạnh tranh
17/12/2024
Hà Tĩnh
hỗ trợ doanh nghiệp
Giải thưởng
của chúng tôi
Top 3
Nền tảng số tiêu biểu của Bộ
TT&TT 2022.
Top 15
Startup Việt xuất sắc 2019 do VNExpress tổ chức.
Top 10
Doanh nghiệp khởi nghiệp sáng tạo Việt Nam - Hội đồng tư vấn kinh doanh ASEAN bình chọn.
Giải Đồng
Sản phẩm công nghệ số Make In Viet Nam 2023.