- Chi tiết công việc
- Giới thiệu công ty
Thu nhập: Cạnh tranh
Loại hình: Toàn thời gian
Mô tả công việc
* Work location: Vung Ang Economic Zone, Ha Tinh Province, Vietnam
* Job type: full time permanent
* Employee type: local Vietnamese
POSITION SUMMARY
Responsible for the maintenance of all I&C systems (turbine) and devices, promoting safe, environmentally friendly and effective maintenance practices within the electrical and I&C (turbine) section. Assist in other areas of the plant as assigned. Oversees budgeting and spending for new capital I&C (turbine) projects as well as routine operating and maintenance expenses assigned to the I&C (turbine) team. Oversee contractors employed to work on I&C (turbine) systems. Ensure that relevant information is kept updated to support the effective implementation of the defined maintenance strategy.
PRIMARY RESPONSIBILITIES
Duties and responsibilities for this position include but are not limited to the following:
- Promote and enforce safe, environmentally friendly and workmanlike maintenance practices within the section and supervised contractors.
- Ensure consistent improvement of I&C (turbine) maintenance across the plant systems, guaranteeing continuous improvement of plant reliability and availability.
- Promote team development and training. Develop required procedures to ensure the established maintenance strategy is known and implemented. Provide leadership and job coordination on critical projects.
- Assist in high level maintenance planning and budgeting, assuming co-responsibility for approved plan and budget.
- Perform other comparable and related duties as assigned.
* VAPCO is a fair Employer. We do not require any recruitment fees from the candidate and do not collect applications from broker individuals or organizations who charge commissions/ fees from applicants. We thank you all candidates, but only the shortlisted will be contacted for interviews.
* Candidates are encouraged to visit our website to understand about us.
* Job type: full time permanent
* Employee type: local Vietnamese
POSITION SUMMARY
Responsible for the maintenance of all I&C systems (turbine) and devices, promoting safe, environmentally friendly and effective maintenance practices within the electrical and I&C (turbine) section. Assist in other areas of the plant as assigned. Oversees budgeting and spending for new capital I&C (turbine) projects as well as routine operating and maintenance expenses assigned to the I&C (turbine) team. Oversee contractors employed to work on I&C (turbine) systems. Ensure that relevant information is kept updated to support the effective implementation of the defined maintenance strategy.
PRIMARY RESPONSIBILITIES
Duties and responsibilities for this position include but are not limited to the following:
- Promote and enforce safe, environmentally friendly and workmanlike maintenance practices within the section and supervised contractors.
- Ensure consistent improvement of I&C (turbine) maintenance across the plant systems, guaranteeing continuous improvement of plant reliability and availability.
- Promote team development and training. Develop required procedures to ensure the established maintenance strategy is known and implemented. Provide leadership and job coordination on critical projects.
- Assist in high level maintenance planning and budgeting, assuming co-responsibility for approved plan and budget.
- Perform other comparable and related duties as assigned.
* VAPCO is a fair Employer. We do not require any recruitment fees from the candidate and do not collect applications from broker individuals or organizations who charge commissions/ fees from applicants. We thank you all candidates, but only the shortlisted will be contacted for interviews.
* Candidates are encouraged to visit our website to understand about us.
Yêu cầu
EDUCATION, EXPERIENCE AND GENERAL REQUIREMENTS
- Electrical, electronic, information, mechanical, chemical or similar Engineering Bachelor Degree is required.
- Minimum 10 years' experience in I&C (turbine) and/or I&C (boiler) maintenance supervision and management or equivalent industrial environment role, 3 years of which must be on a management role.
- Available to work overtime and/or weekends if required.
- Ability to conduct Planning and problem analysis regarding I&C (turbine) Part of the supercritical coal power plant.
- Interpret DCS logic drawing, PLC ladder drawing and Electrical single line drawing
- Familiar with P&ID drawing, Calibration and periodic maintenance for local instrument and commonly used monitoring system such as Furnace monitoring system, Vibration analysis system (like system1), transmitters, etc.
- Familiar with the basic principle of high voltage electrical motor, auxiliary turbine, and hydraulic control system (solenoid valve, servo valve, etc.)
- Prefer a certificate of completion on DCS (Emerson, Siemens, Mitsubishi, etc.), TCS, PLC systems, Computer application system, and Thermal dynamic theory.
- Prefer a certificate of completion on the Environmental facilities (CEMS), the Furnace monitoring system (Tube leak, Combustion status).
- Prefer a certificate of completion for training courses on Super critical Coal power plant such as Turbine, Boiler, Generator or Efficiency of power plant.
- Prefer a certificate of completion for training courses on Process Control such as PID tuning, the basic principle of instrument sensors (pH, DO and O2 meter) and the basic measuring theory of local instruments.
- Possess business level communications skills in English (written and verbal) and be computer literate. Able to communicate/discuss any topic in the business environment.
- Electrical, electronic, information, mechanical, chemical or similar Engineering Bachelor Degree is required.
- Minimum 10 years' experience in I&C (turbine) and/or I&C (boiler) maintenance supervision and management or equivalent industrial environment role, 3 years of which must be on a management role.
- Available to work overtime and/or weekends if required.
- Ability to conduct Planning and problem analysis regarding I&C (turbine) Part of the supercritical coal power plant.
- Interpret DCS logic drawing, PLC ladder drawing and Electrical single line drawing
- Familiar with P&ID drawing, Calibration and periodic maintenance for local instrument and commonly used monitoring system such as Furnace monitoring system, Vibration analysis system (like system1), transmitters, etc.
- Familiar with the basic principle of high voltage electrical motor, auxiliary turbine, and hydraulic control system (solenoid valve, servo valve, etc.)
- Prefer a certificate of completion on DCS (Emerson, Siemens, Mitsubishi, etc.), TCS, PLC systems, Computer application system, and Thermal dynamic theory.
- Prefer a certificate of completion on the Environmental facilities (CEMS), the Furnace monitoring system (Tube leak, Combustion status).
- Prefer a certificate of completion for training courses on Super critical Coal power plant such as Turbine, Boiler, Generator or Efficiency of power plant.
- Prefer a certificate of completion for training courses on Process Control such as PID tuning, the basic principle of instrument sensors (pH, DO and O2 meter) and the basic measuring theory of local instruments.
- Possess business level communications skills in English (written and verbal) and be computer literate. Able to communicate/discuss any topic in the business environment.
Quyền lợi
13th Salary payment
Premium Healhcare for you
15 days annual leave per year
Accommodation
Premium Healhcare for you
15 days annual leave per year
Accommodation
Thông tin khác
Thị xã Kỳ Anh,
Hà Tĩnh
Hà Tĩnh
Thông tin chung
- Thu nhập: Cạnh tranh
Cách thức ứng tuyển
Ứng viên nộp hồ sơ trực tuyến bằng cách bấm nút Ứng tuyển bên dưới:
Hạn nộp: 17/12/2024
Giới thiệu công ty
Xem trang công ty
Công ty chưa cập nhật thông tin....
Quy mô công ty
Từ 101 - 500 nhân viên
Việc làm tương tự
VUNG ANG II THERMAL POWER LLC
Cạnh tranh
17/12/2024
Hà Tĩnh
hỗ trợ doanh nghiệp
Giải thưởng
của chúng tôi
Top 3
Nền tảng số tiêu biểu của Bộ
TT&TT 2022.
Top 15
Startup Việt xuất sắc 2019 do VNExpress tổ chức.
Top 10
Doanh nghiệp khởi nghiệp sáng tạo Việt Nam - Hội đồng tư vấn kinh doanh ASEAN bình chọn.
Giải Đồng
Sản phẩm công nghệ số Make In Viet Nam 2023.