Equipment Maintenance Engineer

BASIC FUNCTION OF THE JOB:
Responsible for day to day to maintain the utilities or manufacturing, coating equipment at
good condition. Repair breakdown of critical machine.
DUTIES AND RESPONSIBILITIES:
1. MANUFACTURING 30%
EQUIPMENT:
activities/tasks to minimize downtime.
MAINTAINNANCE
1.2 Familiar with machine operating system and able
to troubleshoot the manufacturing machines.
1.3 Preventive maintenance is properly carried out
and recorded.
1.4 Equipment breakdown is properly repaired and at
the best available time.
1.5 Make work improvement to reduce the downtime
of critical machine.
1.6 Review and manage the spare parts as well as
the safety stock, inventory reserve, lead-time and
variance between physical and system.
1.7 Make technical report as routinely.
1.8 Lead the daily meeting and assign tasks to team
members and follow up as priority based on
1.9 Production impact.
Follow up with other Dept. to ensure the
1.10 facilities/parts/Manpower are meet the
expectation and minimize impact to production
activity.
Take the responsibility for the KPIs, cascade and
1.11 follow up with team members to ensure the
expectations are met.
2. TECHNICAL 20% 2.1 Through the daily activities, create the "One Point
LEARNING AND
Lesson" and other SOP, WI.
SHARING
2.2 Support or conduct the Technical Training to
improve the knowledge for other team members.
Coach and qualify the newcomers.
2.3 Create complex electrical drawing can apply for
2.4 using, publish and training to lower level
3. AM/PM/CM 20% 3.1 Coordinate and support the Autonomous
Maintenance activities.
3.2 Coordinate with relevant teams to setup the
preventive maintenance as weekly/ monthly
routinely and report.
Review and revise the Work Order to improve the
3.3 Preventive Maintenance quality regularly.
Lead the Team to perform the root cause failure
3.4 analysis and investigations (CAR) properly.
4. 5S AND 10% 4.1 Do the housekeeping and keep the workplace
4. IMPROVEMENT
clean at all-time.
4.2 Propose and lead team to implement the
improvement ideas and Kaizen to improve the
working condition, reduce losses and saving cost
5. EHS AND 10% 5.1 Follow and compliance the Environment-Health-
SECURITY
Safety requirements.
5.2 Feedback the un-safe and security behaviour
with other team members and contractors.
6. IMPROVEMENT 10% 6.1 Initial and leading improvement's project
Accountability for DMAIC
6.2 Develop high work standard which can publish
and apply to work