Equipment Maintenance Manager
II-VI Vietnam Limited Company
Địa điểm làm việc: Đồng Nai
Hết hạn: 16/03/2024
- Chi tiết công việc
- Giới thiệu công ty
Vị trí công việc này hiện tại đã hết hạn nộp hồ sơ, bạn có thể tham khảo thêm một số công việc liên quan phía dưới
Mô tả công việc
This job is to direct and oversee the daily operations of Manufacturing Maintenance Team of designated manufacturing site, & repair breakdown of critical machines.
DUTIES AND RESPONSIBILITIES:
1. Maintenance Management (Manufacturing)
Direct and oversee the operations to ensure manufacturing equipment/machines with availability, reliability, efficiency with the most cost efficiency, including but not limit.
- Provide timely suitable equipment.
- Ensure equipment availability/realizable.
- Maintain and improve equipment in good condition.
- Well equipment/tooling/Spare part management.
- Best energy management.
- Automate machines, tooling internal fabrication.
- Provide suitable technical spec, capacity, capability equipment.
- Well manufacturing project management:
+ Timing and meet expectation.
+ Follow up with other Dept. to ensure the
+ Spare parts/Manpower meet the expectation and minimize impact to production activity.
+ Establish and accountability for the KPIs, cascade and follow up with team members to ensure the expectations are met.
2. AM/PM/CM
- Lead the Autonomous Maintenance activities.
- Lead to ensure the completion and compliance of Preventive Maintenance activity.
- Lead to review and revise the Work Order to improve the Preventive Maintenance quality regularly.
- Lead the Team to perform the root cause failure analysis and investigations (CAR) properly.
3. 5S AND IMPROVEMENT
Direct and oversee all the daily operations of:
- Do the housekeeping and keep the workplace clean at all-time.
- Propose and lead team to implement the improvement ideas and Kaizen to improve the working condition, reduce losses and save cost.
- Initial and leading improvement's project
- Accountability for DMAIC
- Develop high work standard which can publish and apply to work.
4. EHS
Direct and oversee all the daily operations of:
Follow and comply with the Environment-Health-Safety requirements.
5. MANAGEMENT & LEADERSHIP
Ensure your team is staffed, motivated, inspired, engaged, and empowered to deliver a high and sustainable performance level in an ever-changing environment at a cost level the organization can sustain and reflects market realities.
DUTIES AND RESPONSIBILITIES:
1. Maintenance Management (Manufacturing)
Direct and oversee the operations to ensure manufacturing equipment/machines with availability, reliability, efficiency with the most cost efficiency, including but not limit.
- Provide timely suitable equipment.
- Ensure equipment availability/realizable.
- Maintain and improve equipment in good condition.
- Well equipment/tooling/Spare part management.
- Best energy management.
- Automate machines, tooling internal fabrication.
- Provide suitable technical spec, capacity, capability equipment.
- Well manufacturing project management:
+ Timing and meet expectation.
+ Follow up with other Dept. to ensure the
+ Spare parts/Manpower meet the expectation and minimize impact to production activity.
+ Establish and accountability for the KPIs, cascade and follow up with team members to ensure the expectations are met.
2. AM/PM/CM
- Lead the Autonomous Maintenance activities.
- Lead to ensure the completion and compliance of Preventive Maintenance activity.
- Lead to review and revise the Work Order to improve the Preventive Maintenance quality regularly.
- Lead the Team to perform the root cause failure analysis and investigations (CAR) properly.
3. 5S AND IMPROVEMENT
Direct and oversee all the daily operations of:
- Do the housekeeping and keep the workplace clean at all-time.
- Propose and lead team to implement the improvement ideas and Kaizen to improve the working condition, reduce losses and save cost.
- Initial and leading improvement's project
- Accountability for DMAIC
- Develop high work standard which can publish and apply to work.
4. EHS
Direct and oversee all the daily operations of:
Follow and comply with the Environment-Health-Safety requirements.
5. MANAGEMENT & LEADERSHIP
Ensure your team is staffed, motivated, inspired, engaged, and empowered to deliver a high and sustainable performance level in an ever-changing environment at a cost level the organization can sustain and reflects market realities.
Yêu cầu
1. Education:
Bachelor's Degree in one of following major:
• Electrical Engineering
• Electronics
• Mechatronics
2. Experience:
- 8+ years of relevant working experience in PPM (Maintenance in manufacturing companies with at least 3 years of managerial/leadership experience.
3. Abilities:
- Experience in maintenance management for manufacturing machines
- R&M cost control
- Equipment lifts time and maintenance policy identification.
- Good experience at: Automation and electronic equipment: PLC, Inverter, Driver, Step motor, HDMI
- Experience of deployment PM/AM pillar, spare part Inventory control
- Advanced AutoCAD
- Experience in managing contractor management: SOW, JSA, Contract onsite management in the scope of manufacturing maintenance.
- Experience in leading manufacturing project.
- Language: Ability to use English for business communication. Chinese as a 3rd language, is a plus.
Bachelor's Degree in one of following major:
• Electrical Engineering
• Electronics
• Mechatronics
2. Experience:
- 8+ years of relevant working experience in PPM (Maintenance in manufacturing companies with at least 3 years of managerial/leadership experience.
3. Abilities:
- Experience in maintenance management for manufacturing machines
- R&M cost control
- Equipment lifts time and maintenance policy identification.
- Good experience at: Automation and electronic equipment: PLC, Inverter, Driver, Step motor, HDMI
- Experience of deployment PM/AM pillar, spare part Inventory control
- Advanced AutoCAD
- Experience in managing contractor management: SOW, JSA, Contract onsite management in the scope of manufacturing maintenance.
- Experience in leading manufacturing project.
- Language: Ability to use English for business communication. Chinese as a 3rd language, is a plus.
Quyền lợi
Attractive salary & Bonus
Social insurance
Company trip
Social insurance
Company trip
Thông tin khác
Ngày Đăng Tuyển
15/02/2024
Cấp Bậc
Trưởng phòng
Ngành Nghề
Khoa Học & Kỹ Thuật > Kỹ Thuật Điện/Điện Tử
Lĩnh vực
Sản xuất
Kỹ Năng
Maintenance Management, Machinery Maintenance, Chinese, Automation, Electronic Equipment
Ngôn Ngữ Trình Bày Hồ Sơ
Bất kỳ
15/02/2024
Cấp Bậc
Trưởng phòng
Ngành Nghề
Khoa Học & Kỹ Thuật > Kỹ Thuật Điện/Điện Tử
Lĩnh vực
Sản xuất
Kỹ Năng
Maintenance Management, Machinery Maintenance, Chinese, Automation, Electronic Equipment
Ngôn Ngữ Trình Bày Hồ Sơ
Bất kỳ
Thông tin chung
- Ngày hết hạn: 16/03/2024
- Thu nhập: Thỏa thuận
Việc làm tương tự
Công ty TNHH Hảo Phát
7.000.000 đ - 11.000.000 đ/tháng
03/11/2024
Hồ Chí Minh, Đồng Nai
Công Ty TNHH EPE Packaging VN
Thương lượng
31/10/2024
Hồ Chí Minh, Đồng Nai
Công Ty TNHH GIải Pháp Công Nghiệp An Thịnh Phát
10 - 14 triệu VNĐ
21/10/2024
Hồ Chí Minh, Bình Dương, Đồng Nai
CÔNG TY TNHH SXTM HUY VIỆT TÂY ĐÔ
8 - 8.5 triệu
20/11/2024
Hồ Chí Minh, Đồng Nai
Điện Mặt Trời Nacadivi
7.500.000 đ - 25.000.000 đ/tháng
16/10/2024
Hồ Chí Minh, Đồng Nai
hỗ trợ doanh nghiệp
Giải thưởng
của chúng tôi
Top 3
Nền tảng số tiêu biểu của Bộ
TT&TT 2022.
Top 15
Startup Việt xuất sắc 2019 do VNExpress tổ chức.
Top 10
Doanh nghiệp khởi nghiệp sáng tạo Việt Nam - Hội đồng tư vấn kinh doanh ASEAN bình chọn.
Giải Đồng
Sản phẩm công nghệ số Make In Viet Nam 2023.