Mechanical Engineer
Organo (Vietnam) - Global Engineering Center
Địa điểm làm việc: Hồ Chí Minh
Hết hạn: 07/03/2024
- Chi tiết công việc
- Giới thiệu công ty
Vị trí công việc này hiện tại đã hết hạn nộp hồ sơ, bạn có thể tham khảo thêm một số công việc liên quan phía dưới
Mô tả công việc
- Responsible for detailed design, including piping route planning, skid design, and equipment design, based on Organo Group's basic plan and design.
- Understanding of Specification sheet, P&ID, Layout, related process documents, structure drawing, and piping design piping.
- Work as a process designer, supporting mechanical design, managing P3D, and developing modernized engineering.
- Create P&ID by Plant3D & Engineering data under senior instruction and make RFQ.
- Prepare for equipment selection calculations, design strength calculations, design specifications, Line code and spec, and piping pressure loss calculation.
- Create Layout under senior instruction.
- Provide instructions for outsourcing.
- Create technical documents and suggestions for standardization and work efficiency improvement.
- Other related tasks as assigned.
- Understanding of Specification sheet, P&ID, Layout, related process documents, structure drawing, and piping design piping.
- Work as a process designer, supporting mechanical design, managing P3D, and developing modernized engineering.
- Create P&ID by Plant3D & Engineering data under senior instruction and make RFQ.
- Prepare for equipment selection calculations, design strength calculations, design specifications, Line code and spec, and piping pressure loss calculation.
- Create Layout under senior instruction.
- Provide instructions for outsourcing.
- Create technical documents and suggestions for standardization and work efficiency improvement.
- Other related tasks as assigned.
Yêu cầu công việc
Knowledge of engineering:
- Ability to comprehend and create P&ID.
- Ability to read and understand technical documents and drawings in English.
- Knowledge of process and process control.
- Familiarity with the standard of materials used in structural design, storage tanks, vessels, and piping (JIS or equivalent standards).
- Knowledge of piping drawings and isometric drawings, and the ability to create manufacturing drawings. Experience with JIS and PVC piping is an advantage.
- Knowledge of hydraulic calculations, valve and pump selection, and experience in creating process documents and drawings.
- Knowledge of simulation work such as fluid analysis.
Character:
- Highly motivated and hardworking with good leadership.
- Excellent interpersonal communication.
- Ability to work independently and in a team.
- Logical thinking and explanation.
Experience:
- Prefer candidates with over 2 years of EPC project experience in Process, T&C positions across various industries, including water treatment, oil, and gas.
- Basic understanding of industrial standards, materials, P&ID, piping diagrams, isometric drawings, manufacturing drawings, hydraulic calculations, pump and valve selection, and familiarity with creating process documents/drawings is required. Experience with JIS and PVC piping is preferred.
- Preference will be given to candidates with prior work experience in Japanese companies.
Language:
- Ability to communicate in English
- Having proficiency in the Japanese language is an advantage
Technical competencies:
- Familiar with MS Office
- Familiar with process software tools like Plant 3D P&ID and AVEVA P&ID.
- Preference will be given to candidates who are familiar with AutoCAD 2D & 3D, Plant 3D, or CADworx Plant.
- Preferential treatment for familiarity with programming such as Python, and API programming such as Forge, Power BI, and VBA.
Bachelor's degree: Bachelor's degree in Chemical, Process, Environmental, or Biological Engineering
Age: From 24 to 30 years old
Gender: Any
Others: Opportunity to go overseas for business trips for around 1 year in cases change to Test & Commissioning Engineer position
- Ability to comprehend and create P&ID.
- Ability to read and understand technical documents and drawings in English.
- Knowledge of process and process control.
- Familiarity with the standard of materials used in structural design, storage tanks, vessels, and piping (JIS or equivalent standards).
- Knowledge of piping drawings and isometric drawings, and the ability to create manufacturing drawings. Experience with JIS and PVC piping is an advantage.
- Knowledge of hydraulic calculations, valve and pump selection, and experience in creating process documents and drawings.
- Knowledge of simulation work such as fluid analysis.
Character:
- Highly motivated and hardworking with good leadership.
- Excellent interpersonal communication.
- Ability to work independently and in a team.
- Logical thinking and explanation.
Experience:
- Prefer candidates with over 2 years of EPC project experience in Process, T&C positions across various industries, including water treatment, oil, and gas.
- Basic understanding of industrial standards, materials, P&ID, piping diagrams, isometric drawings, manufacturing drawings, hydraulic calculations, pump and valve selection, and familiarity with creating process documents/drawings is required. Experience with JIS and PVC piping is preferred.
- Preference will be given to candidates with prior work experience in Japanese companies.
Language:
- Ability to communicate in English
- Having proficiency in the Japanese language is an advantage
Technical competencies:
- Familiar with MS Office
- Familiar with process software tools like Plant 3D P&ID and AVEVA P&ID.
- Preference will be given to candidates who are familiar with AutoCAD 2D & 3D, Plant 3D, or CADworx Plant.
- Preferential treatment for familiarity with programming such as Python, and API programming such as Forge, Power BI, and VBA.
Bachelor's degree: Bachelor's degree in Chemical, Process, Environmental, or Biological Engineering
Age: From 24 to 30 years old
Gender: Any
Others: Opportunity to go overseas for business trips for around 1 year in cases change to Test & Commissioning Engineer position
Quyền lợi được hưởng
ORGANO (VIETNAM) - Global Engineering Center
ORGANO (VIETNAM) - Global Engineering Center
ORGANO (VIETNAM) - Global Engineering Center
ORGANO (VIETNAM) - Global Engineering Center
ORGANO (VIETNAM) - Global Engineering Center
Thông tin khác
Ngày Đăng Tuyển
[protected info]
Cấp Bậc
Nhân viên
Ngành Nghề
Thiết Kế > Thiết Kế Công Nghiệp/Kỹ Thuật
Lĩnh vực
Dịch vụ môi trường/Chất thải
Kỹ Năng
Xử Lý Nước Thải, Mechanical Engineering, Cơ Khí, Chemical, AutoCAD
Ngôn Ngữ Trình Bày Hồ Sơ
Tiếng Anh
[protected info]
Cấp Bậc
Nhân viên
Ngành Nghề
Thiết Kế > Thiết Kế Công Nghiệp/Kỹ Thuật
Lĩnh vực
Dịch vụ môi trường/Chất thải
Kỹ Năng
Xử Lý Nước Thải, Mechanical Engineering, Cơ Khí, Chemical, AutoCAD
Ngôn Ngữ Trình Bày Hồ Sơ
Tiếng Anh
Thông tin chung
- Ngày hết hạn: 07/03/2024
- Thu nhập: 500 - 1000 USD
Việc làm tương tự
CÔNG TY TNHH ĐẦU TƯ NAVIHOLD
8 - 12 triệu
09/10/2024
Hồ Chí Minh
CÔNG TY TNHH CẢI TIẾN XANH
10 - 12 triệu VNĐ
21/10/2024
Hồ Chí Minh
CÔNG TY CỔ PHẦN PHỐ XANH
10 - 15 triệu VNĐ
01/11/2024
Hồ Chí Minh
CÔNG TY CỔ PHẦN CẢI TIẾN XANH
10 - 12 triệu
19/10/2024
Hồ Chí Minh, Đồng Nai
CÔNG TY TNHH GIẢI PHÁP MÔI TRƯỜNG ĐẠI NAM
12 triệu - 16 triệu
20/11/2024
Hồ Chí Minh
CÔNG TY TNHH GIẢI PHÁP MÔI TRƯỜNG ĐẠI NAM
8 triệu - 12 triệu
04/11/2024
Hồ Chí Minh
hỗ trợ doanh nghiệp
Giải thưởng
của chúng tôi
Top 3
Nền tảng số tiêu biểu của Bộ
TT&TT 2022.
Top 15
Startup Việt xuất sắc 2019 do VNExpress tổ chức.
Top 10
Doanh nghiệp khởi nghiệp sáng tạo Việt Nam - Hội đồng tư vấn kinh doanh ASEAN bình chọn.
Giải Đồng
Sản phẩm công nghệ số Make In Viet Nam 2023.