Nhân viên kho

Mô tả Công việc
JOB REQUIREMENT FOR THE STORE PERSON SHALL:
RESPONSIBILITIES
1. The Store Person is responsible to the Line Maintenance Controller for the management of the store.
2. The store person is responsible for communicating to the LMC, TL or DE parts and tooling issues which may impact maintenance operations.
3. The store person shall cooperate with the customer's supply department for parts movements.
DUTIES
Ensure all parts, components, materials and tools are accounted for and stored in accordance with customer requirements.
Maintain logs of segregated inventories and notify customers when reorder points have been reached.
Continuously monitor customer's material, tool and equipment for condition. Ship or return repairable components when required.
Maintain logs for the issuance and return of parts, tools and equipment.
Continuously monitor company material, tools and equipment for availability and condition.
Arrival and Departure Kits shall be inspected at issuance and again on return.
Missing or damaged tools shall be reported to the Duty Engineer immediately on discovery. Ensure required tool and equipment maintenance has been properly accomplished.
Tag, bag and ensure all parts, components and material are protected from the environment. Monitor and control shelf life limited items and records. Expired shelf life limited items shall be quarantined pending disposition.
Ensure calibrated tools are maintained in serviceable condition and properly stored.
Calibrated tools and equipment shall be shipped to QSD approved calibration agencies.
Perform Receiving Inspections of all parts, material and tools, if so authorized.
Monitor and record environmental conditions on a daily basis.
Continuously monitor office material and equipment for availability and condition.
Maintain the quarantine locker by keeping a log of its contents and limiting access to only authorized persons.
Inform the OM, LMC or TL when tools, equipment, parts and material are removed from service.
Collect and make available Material Safety Data Sheets of hazardous materials
Other Responsibilities
Conduct an incoming inspection on parts and/or materials to be used by the SAAM Repair Station, including:
Performing the incoming inspection, acceptance and tagging of aircraft components and material.
Performing the incoming inspection and tagging for aircraft components removed from A/C or from their NHA.
Registering components and material data into register or computer system or other management software provided by the customer.
Controlling the storage and release of aircraft components and material to aircraft maintenance.
Performing the receiving inspection of tools and equipment
Other tasks assigned by DyOM of station/ Quality department.