Piping Engineer
Organo (Vietnam) - Global Engineering Center
Địa điểm làm việc: Hồ Chí Minh
Hết hạn: 13/03/2024
- Chi tiết công việc
- Giới thiệu công ty
Vị trí công việc này hiện tại đã hết hạn nộp hồ sơ, bạn có thể tham khảo thêm một số công việc liên quan phía dưới
Mô tả công việc
- Responsible for detailed design, including piping route planning, skid design, and equipment design, based on Organo Group's basic plan and design.
- Understanding of Specification sheet, P&ID, Layout, related process documents, structure drawing, and piping design piping.
- Work as a process designer, supporting mechanical design, managing P3D, and developing modernized engineering.
- Create P&ID by Plant3D & Engineering data under senior instruction and make RFQ.
- Prepare for equipment selection calculations, design strength calculations, design specifications, Line code and spec, and piping pressure loss calculation.
- Create Layout under senior instruction.
- Provide instructions for outsourcing.
- Create technical documents and suggestions for standardization and work efficiency improvement.
- Other related tasks as assigned.
- Understanding of Specification sheet, P&ID, Layout, related process documents, structure drawing, and piping design piping.
- Work as a process designer, supporting mechanical design, managing P3D, and developing modernized engineering.
- Create P&ID by Plant3D & Engineering data under senior instruction and make RFQ.
- Prepare for equipment selection calculations, design strength calculations, design specifications, Line code and spec, and piping pressure loss calculation.
- Create Layout under senior instruction.
- Provide instructions for outsourcing.
- Create technical documents and suggestions for standardization and work efficiency improvement.
- Other related tasks as assigned.
Yêu cầu
Knowledge of engineering:
- Ability to comprehend and create P&ID.
- Ability to read and understand technical documents and drawings in English.
- Knowledge of process and process control.
- Familiarity with the standard of materials used in structural design, storage tanks, vessels, and piping (JIS or equivalent standards).
- Knowledge of piping drawings and isometric drawings, and the ability to create manufacturing drawings. Experience with JIS and PVC piping is an advantage.
- Knowledge of hydraulic calculations, valve and pump selection, and experience in creating process documents and drawings.
- Knowledge of simulation work such as fluid analysis.
Character:
- Highly motivated and hardworking with good leadership.
- Excellent interpersonal communication.
- Ability to work independently and in a team.
- Logical thinking and explanation.
Experience:
- Prefer candidates with over 2 years of EPC project experience in Process, T&C positions across various industries, including water treatment, oil, and gas.
- Basic understanding of industrial standards, materials, P&ID, piping diagrams, isometric drawings, manufacturing drawings, hydraulic calculations, pump and valve selection, and familiarity with creating process documents/drawings is required. Experience with JIS and PVC piping is preferred.
- Preference will be given to candidates with prior work experience in Japanese companies.
Language:
- Ability to communicate in English
- Having proficiency in the Japanese language is an advantage
Technical competencies:
- Familiar with MS Office
- Familiar with process software tools like Plant 3D P&ID and AVEVA P&ID.
- Preference will be given to candidates who are familiar with AutoCAD 2D & 3D, Plant 3D, or CADworx Plant.
- Preferential treatment for familiarity with programming such as Python, and API programming such as Forge, Power BI, and VBA.
Bachelor's degree: Bachelor's degree in Chemical, Process, Environmental, or Biological Engineering
Age: From 24 to 30 years old
Gender: Any
Others: Opportunity to go overseas for business trips for around 1 year in cases change to Test & Commissioning Engineer position
- Ability to comprehend and create P&ID.
- Ability to read and understand technical documents and drawings in English.
- Knowledge of process and process control.
- Familiarity with the standard of materials used in structural design, storage tanks, vessels, and piping (JIS or equivalent standards).
- Knowledge of piping drawings and isometric drawings, and the ability to create manufacturing drawings. Experience with JIS and PVC piping is an advantage.
- Knowledge of hydraulic calculations, valve and pump selection, and experience in creating process documents and drawings.
- Knowledge of simulation work such as fluid analysis.
Character:
- Highly motivated and hardworking with good leadership.
- Excellent interpersonal communication.
- Ability to work independently and in a team.
- Logical thinking and explanation.
Experience:
- Prefer candidates with over 2 years of EPC project experience in Process, T&C positions across various industries, including water treatment, oil, and gas.
- Basic understanding of industrial standards, materials, P&ID, piping diagrams, isometric drawings, manufacturing drawings, hydraulic calculations, pump and valve selection, and familiarity with creating process documents/drawings is required. Experience with JIS and PVC piping is preferred.
- Preference will be given to candidates with prior work experience in Japanese companies.
Language:
- Ability to communicate in English
- Having proficiency in the Japanese language is an advantage
Technical competencies:
- Familiar with MS Office
- Familiar with process software tools like Plant 3D P&ID and AVEVA P&ID.
- Preference will be given to candidates who are familiar with AutoCAD 2D & 3D, Plant 3D, or CADworx Plant.
- Preferential treatment for familiarity with programming such as Python, and API programming such as Forge, Power BI, and VBA.
Bachelor's degree: Bachelor's degree in Chemical, Process, Environmental, or Biological Engineering
Age: From 24 to 30 years old
Gender: Any
Others: Opportunity to go overseas for business trips for around 1 year in cases change to Test & Commissioning Engineer position
Quyền lợi
ORGANO (VIETNAM) - Global Engineering Center
ORGANO (VIETNAM) - Global Engineering Center
ORGANO (VIETNAM) - Global Engineering Center
ORGANO (VIETNAM) - Global Engineering Center
ORGANO (VIETNAM) - Global Engineering Center
Thông tin khác
Posted Date
[protected info]
Job Level
Experienced (non-manager)
Job Function
Design > Industrial Design/Technical Design
Industry
Environment/Waste Services
Skill
Xử Lý Nước Thải, Mechanical Engineering, Cơ Khí, Chemical, AutoCAD
Preferred Language
English
[protected info]
Job Level
Experienced (non-manager)
Job Function
Design > Industrial Design/Technical Design
Industry
Environment/Waste Services
Skill
Xử Lý Nước Thải, Mechanical Engineering, Cơ Khí, Chemical, AutoCAD
Preferred Language
English
Thông tin chung
- Ngày hết hạn: 13/03/2024
- Thu nhập: 500 - 1000 USD
Việc làm tương tự
Công ty Cổ phần Viễn thông FPT - FPT Telecom
Thương lượng
02/11/2024
Hồ Chí Minh
PI ASSOCIATES JSC.,
15,000,000 - 30,000,000 VNĐ
20/10/2024
Hồ Chí Minh
Công ty Cổ phần Viễn thông FPT - FPT Telecom
15,000,000 - 40,000,000 VND
31/10/2024
Hồ Chí Minh
Công ty Cổ phần Viễn thông FPT - FPT Telecom
Thương lượng
31/10/2024
Hồ Chí Minh
Công ty Cổ phần Viễn thông FPT - FPT Telecom
thỏa thuận
09/10/2024
Hồ Chí Minh
Công ty TNHH INFOdation VN
You'll love it
30/10/2024
Hồ Chí Minh, Khánh Hòa
Công Ty Trách Nhiệm Hữu Hạn Giải Pháp Toàn Cầu Iij Việt Nam
Thỏa thuận
29/10/2024
Hồ Chí Minh
hỗ trợ doanh nghiệp
Giải thưởng
của chúng tôi
Top 3
Nền tảng số tiêu biểu của Bộ
TT&TT 2022.
Top 15
Startup Việt xuất sắc 2019 do VNExpress tổ chức.
Top 10
Doanh nghiệp khởi nghiệp sáng tạo Việt Nam - Hội đồng tư vấn kinh doanh ASEAN bình chọn.
Giải Đồng
Sản phẩm công nghệ số Make In Viet Nam 2023.