- Chi tiết công việc
- Giới thiệu công ty
Vị trí công việc này hiện tại đã hết hạn nộp hồ sơ, bạn có thể tham khảo thêm một số công việc liên quan phía dưới
Mô tả công việc
Mô tả Công việc
1. Manufacturing/engineering process management
Fully understand current process capability. Execute; improve processes simply, reliably, and efficiently. Reduce process variance. Ensure product yield achieve target. Specific duties including but not limited to:
− Ensure the readiness, up-to-date and reliability of processes WI, WPS, BOM/Routing.
− Ensure P-FMEA was updated and apply on time.
− Trouble shooting on shop floor for thin film coater.
− New processes or process changes are evaluated, documented, and are compatible with corporate engineering and manufacturing information systems.
− Strict enforcement of manufacturing procedures & equipment operation though training & audits
− Leads and/or participates in resolutions or problem, which may be people, machinery or process related
− Train operators and technicians on technical aspects of process flow & equipment operation, including safety.
− Weekly review for improvement to meet target yield of process.
− Complete CAR and Task efficiently on time
2. Process optimisation and improvement
Saving cost by continual optimize and improve processing method, material, tooling, consumable etc. Specific duties including but not limited to:
− QRB Project. Qualify for new material, machine, tooling, consumable, process (exclude measurement related)
− Improvement Project for cost saving and capability improvement
− Develop alternative material, tooling, consumable, machine
− Optimizing process to shorten cycle time
− Support P.I.C team for supply chain localize for cost saving
3. Process capability improvement
Develop new process technique. Extend process capability. Capture new part order. Specific duties including but not limited to:
− Drive new product/process, new process technique.
− Organize actively trial for new process method, new tooling, new consumable
4. Technical
Technical problem handling and support for internal customer. Specific duties including but not limited to:
− Support QA for customer complaint investigation and improve (for engineering issue)
− Support Product Engineers for trouble shooting and do trial processes for improvement.
− Support Production team for abnormal issue
1. Manufacturing/engineering process management
Fully understand current process capability. Execute; improve processes simply, reliably, and efficiently. Reduce process variance. Ensure product yield achieve target. Specific duties including but not limited to:
− Ensure the readiness, up-to-date and reliability of processes WI, WPS, BOM/Routing.
− Ensure P-FMEA was updated and apply on time.
− Trouble shooting on shop floor for thin film coater.
− New processes or process changes are evaluated, documented, and are compatible with corporate engineering and manufacturing information systems.
− Strict enforcement of manufacturing procedures & equipment operation though training & audits
− Leads and/or participates in resolutions or problem, which may be people, machinery or process related
− Train operators and technicians on technical aspects of process flow & equipment operation, including safety.
− Weekly review for improvement to meet target yield of process.
− Complete CAR and Task efficiently on time
2. Process optimisation and improvement
Saving cost by continual optimize and improve processing method, material, tooling, consumable etc. Specific duties including but not limited to:
− QRB Project. Qualify for new material, machine, tooling, consumable, process (exclude measurement related)
− Improvement Project for cost saving and capability improvement
− Develop alternative material, tooling, consumable, machine
− Optimizing process to shorten cycle time
− Support P.I.C team for supply chain localize for cost saving
3. Process capability improvement
Develop new process technique. Extend process capability. Capture new part order. Specific duties including but not limited to:
− Drive new product/process, new process technique.
− Organize actively trial for new process method, new tooling, new consumable
4. Technical
Technical problem handling and support for internal customer. Specific duties including but not limited to:
− Support QA for customer complaint investigation and improve (for engineering issue)
− Support Product Engineers for trouble shooting and do trial processes for improvement.
− Support Production team for abnormal issue
Yêu cầu
Yêu Cầu Công Việc
Bachelor's Degree in Engineering or Sciences. The following specialisations in Engineering or Sciences are preferred: Mechanical Engineering; Mechatronics Engineering; Chemical Engineering; Material Sciences; Materials Engineering and other relevant specialisations with the job
At least 2 years of related working experience in manufacturing environment with a highly technical, quality oriented, high volume, light-manufacturing environment. Working experience in Optical Manufacturing is strongly preferred
− Experience in well-developed fault isolation, problem solving & analytical skills.
− Experience in methodisation and improvement of manufacturing processes.
− Experience in designing simple tools, jigs and fixture for manufacturing processes.
− Experience in using P-FMEA, SPC and other statistical methods.
− Experience in using AutoCAD.
Bachelor's Degree in Engineering or Sciences. The following specialisations in Engineering or Sciences are preferred: Mechanical Engineering; Mechatronics Engineering; Chemical Engineering; Material Sciences; Materials Engineering and other relevant specialisations with the job
At least 2 years of related working experience in manufacturing environment with a highly technical, quality oriented, high volume, light-manufacturing environment. Working experience in Optical Manufacturing is strongly preferred
− Experience in well-developed fault isolation, problem solving & analytical skills.
− Experience in methodisation and improvement of manufacturing processes.
− Experience in designing simple tools, jigs and fixture for manufacturing processes.
− Experience in using P-FMEA, SPC and other statistical methods.
− Experience in using AutoCAD.
Quyền lợi
Laptop
Chế độ bảo hiểm
Du Lịch
Phụ cấp
Xe đưa đón
Chế độ thưởng
Chăm sóc sức khỏe
Đào tạo
Tăng lương
Nghỉ phép năm
Chế độ bảo hiểm
Du Lịch
Phụ cấp
Xe đưa đón
Chế độ thưởng
Chăm sóc sức khỏe
Đào tạo
Tăng lương
Nghỉ phép năm
Thông tin khác
Bằng cấp:
Đại học
Độ tuổi:
25 - 40
Lương:
Cạnh tranh
Đại học
Độ tuổi:
25 - 40
Lương:
Cạnh tranh
Thông tin chung
- Ngày hết hạn: 01/04/2024
- Thu nhập: Thỏa thuận
Giới thiệu công ty
Xem trang công ty
Công ty TNHH II-VI VIETNAM là công ty 100% vốn nước ngoài thuộc Tập đoàn II-VI (Mỹ) đứng hàng đầu thế giới trong công nghệ kỹ thuật cao. Sản xuất kính quang học, kính hồng ngoại và sản phẩm nhiệt địện kỹ thuật cao. Do nhu cầu phát triển của công ty, chúng tôi đang tìm kiếm những ứng viên xuất sắc, ...
Công ty TNHH II-VI VIETNAM là công ty 100% vốn nước ngoài thuộc Tập đoàn II-VI (Mỹ) đứng hàng đầu thế giới trong công nghệ kỹ thuật cao. Sản xuất kính quang học, kính hồng ngoại và sản phẩm nhiệt địện kỹ thuật cao. Do nhu cầu phát triển của công ty, chúng tôi đang tìm kiếm những ứng viên xuất sắc, ...
Quy mô công ty
Từ 1000 - 5000 nhân viên
Việc làm tương tự
East West Industries Vietnam LLC.
Cạnh tranh
12/10/2024
Hồ Chí Minh, Bình Dương, Đồng Nai
CÔNG TY TNHH UNIND (VIỆT NAM)
Từ 15 triệu VND
10/10/2024
Bình Dương, Long An
Liên Hiệp Hợp Tác Xã Thương Mại TP. Hồ Chí Minh Saigon Co.op
7 - 10 triệu
20/10/2024
Hồ Chí Minh, Bình Dương
CÔNG TY CỔ PHẦN ĐẦU TƯ MINHVIETCORP
10 - 12 triệu VNĐ
11/10/2024
Bình Dương
Công Ty CP Nhựa Thiếu Niên Tiền Phong
Cạnh tranh
31/10/2024
Bình Dương
Công ty Cổ phần Nhựa Thiếu Niên Tiền Phong Phía Nam
thỏa thuận
31/10/2024
Bình Dương
CÔNG TY TNHH KANEKA MEDICAL VIỆT NAM
Thoả thuận
10/10/2024
Bình Dương
hỗ trợ doanh nghiệp
Giải thưởng
của chúng tôi
Top 3
Nền tảng số tiêu biểu của Bộ
TT&TT 2022.
Top 15
Startup Việt xuất sắc 2019 do VNExpress tổ chức.
Top 10
Doanh nghiệp khởi nghiệp sáng tạo Việt Nam - Hội đồng tư vấn kinh doanh ASEAN bình chọn.
Giải Đồng
Sản phẩm công nghệ số Make In Viet Nam 2023.