- Chi tiết công việc
- Giới thiệu công ty
Vị trí công việc này hiện tại đã hết hạn nộp hồ sơ, bạn có thể tham khảo thêm một số công việc tương tự tại đây:
Mô tả công việc
Mô tả Công việc
JOB SUMMARY
The Process Engineer follows lean manufacturing techniques to provide engineering support and develop robust manufacturing processes. Has a primary role in the engineering of new, modified and/or existing manufacturing operations.
DUTIES, Responsibilities, And Authorities
· To ensure that all process engineering activities are handled professionally and effectively.
· Ensure the coordinated support of all daily, weekly, process and administrative checks. To ensure engineering activities and support day to day operations in the manufacturing area/s.
· Understand equipment use and limitations, work with Engineering and Maintenance to improve.
Coordinate the Identification of poor production mold, raise awareness to production support, ensure that investigations are thorough and mold demands are submitted for replacements/preparing.
· Coordinate with the Maintenance and Engineering Manager on any EH&S, or equipment issues.
· To ensure all processes are aligned with an emphasis on safety, quality, delivery and cost.
· To be a key team member for implementing and sustaining lean manufacturing techniques in project fulfilment and Kaizen activities.
· Assist in all quality deviations identified, initiate immediate action plans, monitor output, trial and implement initial and or long-term fixes and changes.
· Provide support for cross functional teams on customer returns to investigate, trial and implement initial and or long-term fixes and changes. Uses standard problem-solving tools, e.g., 8D, 5 Whys, Fishbone.
· Coordinate and support New Product Introduction, to assist in the trialing of sample production and process evaluation.
· Analyses new product specifications and translates these into manufacturing processes to achieve expected quality levels and establish the reliability of the finished product.
· Responsible for the completion of the design and development of optimal, cost-effective, and reliable manufacturing processes.
· Performs DOEs, and participates in the development of control plans, Process Maps, and PFMEA documentation.
· Develops and documents standard operating procedures (SOP) and trains manufacturing personnel on SOPs
JOB SUMMARY
The Process Engineer follows lean manufacturing techniques to provide engineering support and develop robust manufacturing processes. Has a primary role in the engineering of new, modified and/or existing manufacturing operations.
DUTIES, Responsibilities, And Authorities
· To ensure that all process engineering activities are handled professionally and effectively.
· Ensure the coordinated support of all daily, weekly, process and administrative checks. To ensure engineering activities and support day to day operations in the manufacturing area/s.
· Understand equipment use and limitations, work with Engineering and Maintenance to improve.
Coordinate the Identification of poor production mold, raise awareness to production support, ensure that investigations are thorough and mold demands are submitted for replacements/preparing.
· Coordinate with the Maintenance and Engineering Manager on any EH&S, or equipment issues.
· To ensure all processes are aligned with an emphasis on safety, quality, delivery and cost.
· To be a key team member for implementing and sustaining lean manufacturing techniques in project fulfilment and Kaizen activities.
· Assist in all quality deviations identified, initiate immediate action plans, monitor output, trial and implement initial and or long-term fixes and changes.
· Provide support for cross functional teams on customer returns to investigate, trial and implement initial and or long-term fixes and changes. Uses standard problem-solving tools, e.g., 8D, 5 Whys, Fishbone.
· Coordinate and support New Product Introduction, to assist in the trialing of sample production and process evaluation.
· Analyses new product specifications and translates these into manufacturing processes to achieve expected quality levels and establish the reliability of the finished product.
· Responsible for the completion of the design and development of optimal, cost-effective, and reliable manufacturing processes.
· Performs DOEs, and participates in the development of control plans, Process Maps, and PFMEA documentation.
· Develops and documents standard operating procedures (SOP) and trains manufacturing personnel on SOPs
Yêu cầu công việc
Yêu Cầu Công Việc
Continuation of DUTIES AND RESPONSIBILITIES
· Work closely with cross functional teams, in all areas on corrective actions and efficiency benefits.
· Use 6 Sigma methodology and be part of continuous improvement and change management projects.
· Provides mentorship to others through experiences and education as opportunities arise.
· Liaise with the Operations Manager and Engineering in support of all work areas as necessary.
· Ensure safety performance is adequately communicated.
MINIMUM QUALIFICATION REQUIREMENTS Education
· Bachelor's degree or equivalent of education in Mechanical/Process/Production Engineering.
Experience
· Minimum 3 years engineering experience working in mold design of Plastic/Elastomer production.
Skills
· Knowledge and experience of 6 Sigma techniques, route cause analysis, elastomer production.
· Compression/ Injection Mold design techniques. Ability in using Mold design software for reading/creating mold drawing.
· Good communication skills, to be able to present ideas and concepts and delegate duties to others with effective monitoring and feedback.
· Excellent problem solving and analysis skills.
· Ability to plan, develop and deliver projects to time, cost and conclusion.
· Resolve issues in a timely and empathetic manner.
· To provide training and mentoring, sharing knowledge and ideas, management of others.
Continuation of DUTIES AND RESPONSIBILITIES
· Work closely with cross functional teams, in all areas on corrective actions and efficiency benefits.
· Use 6 Sigma methodology and be part of continuous improvement and change management projects.
· Provides mentorship to others through experiences and education as opportunities arise.
· Liaise with the Operations Manager and Engineering in support of all work areas as necessary.
· Ensure safety performance is adequately communicated.
MINIMUM QUALIFICATION REQUIREMENTS Education
· Bachelor's degree or equivalent of education in Mechanical/Process/Production Engineering.
Experience
· Minimum 3 years engineering experience working in mold design of Plastic/Elastomer production.
Skills
· Knowledge and experience of 6 Sigma techniques, route cause analysis, elastomer production.
· Compression/ Injection Mold design techniques. Ability in using Mold design software for reading/creating mold drawing.
· Good communication skills, to be able to present ideas and concepts and delegate duties to others with effective monitoring and feedback.
· Excellent problem solving and analysis skills.
· Ability to plan, develop and deliver projects to time, cost and conclusion.
· Resolve issues in a timely and empathetic manner.
· To provide training and mentoring, sharing knowledge and ideas, management of others.
Quyền lợi được hưởng
Laptop
Chế độ bảo hiểm
Du Lịch
Xe đưa đón
Đồng phục
Chế độ thưởng
Chăm sóc sức khỏe
Đào tạo
Tăng lương
Công tác phí
Chế độ bảo hiểm
Du Lịch
Xe đưa đón
Đồng phục
Chế độ thưởng
Chăm sóc sức khỏe
Đào tạo
Tăng lương
Công tác phí
Thông tin khác
Bằng cấp:
Đại học
Độ tuổi:
25 - 38
Lương:
1,000 - 2,200
USD
Đại học
Độ tuổi:
25 - 38
Lương:
1,000 - 2,200
USD
Nộp hồ sơ liên hệ
Trelleborg
Giới thiệu công ty
Xem trang công ty
Trelleborg Sealing Solutions is a leading global supplier of sealing solutions. Our range of products includes O-Rings, hydraulic seals, rotary shaft seals, oil seals, static seals, pneumatic seals, mechanical face seals and many more.
Xem thêm Thu gọn
Quy mô công ty
Chưa rõ
Việc làm tương tự
East West Industries Vietnam LLC.
Cạnh tranh
11/05/2024
Hồ Chí Minh, Bình Dương, Đồng Nai
Công Ty TNHH Action Composites Hightech Industries
Cạnh tranh
05/05/2024
Đồng Nai
Công Ty TNHH Action Composites Hightech Industries
Cạnh tranh
05/05/2024
Đồng Nai
Cty TNHH Công Nghệ Điện Tử - Nghe Nhìn Boe Việt Nam
thỏa thuận
28/05/2024
Bà Rịa - Vũng Tàu, Đồng Nai
Công ty TNHH Akzonobel coatings Viet Nam
Cạnh tranh
01/05/2024
Bắc Ninh, Bình Dương, Đồng Nai
CÔNG TY CỔ PHẦN KẾT CẤU THÉP ATAD
Cạnh tranh
08/05/2024
Đồng Nai
hỗ trợ doanh nghiệp
Giải thưởng
của chúng tôi
Top 3
Nền tảng số tiêu biểu của Bộ
TT&TT 2022.
Top 15
Startup Việt xuất sắc 2019 do VNExpress tổ chức.
Top 10
Doanh nghiệp khởi nghiệp sáng tạo Việt Nam - Hội đồng tư vấn kinh doanh ASEAN bình chọn.
Giải Đồng
Sản phẩm công nghệ số Make In Viet Nam 2023.