Turbine Leader (Thermal Power Plant, in Ha Tinh)VUNG ANG II THERMAL POWER LLC
Nơi làm việc: Hà Tĩnh
Ngành nghề: Sản xuất / Vận hành sản xuất, Bảo trì / Sửa chữa, Ô tô - Xe máy, Dầu khí - Hóa chất, Cơ khí chế tạo / Điện / Điện tử / Tự động hóa, Cơ khí - Chế tạo
Lương: Thỏa thuận
Hình thức: Toàn thời gian
Ngày đăng: 13/05/2024
Hạn nộp: 19/07/2024
Mô tả công việc
* Work location: Vung Ang Economic Zone, Ha Tinh Province, Vietnam
* Job type: full time permanent
* Employee type: local Vietnamese
POSITION SUMMARY
Responsible for the maintenance of all I&C systems and devices, promoting safe, environmentally friendly and effective maintenance practices within the electrical and I&C section. Assist in other areas of the plant as assigned. Oversees budgeting and spending for new capital I&C projects as well as routine operating and maintenance expenses assigned to the I&C team. Oversee contractors employed to work on I&C systems. Ensure that relevant information is kept updated to support the effective implementation of the defined maintenance strategy.
PRIMARY RESPONSIBILITIES
Duties and responsibilities for this position include but are not limited to the following:
• Promote and enforce safe, environmentally friendly and workmanlike maintenance practices within the section and supervised contractors.
• Ensure consistent improvement of I&C maintenance across the plant systems, guaranteeing continuous improvement of plant reliability and availability.
• Promote team development and training. Develop required procedures to ensure the established maintenance strategy is known and implemented. Provide leadership and job coordination on critical projects.
• Assist in high level maintenance planning and budgeting, assuming co-responsibility for approved plan and budget.
• Perform other comparable and related duties as assigned.
* VAPCO is a fair Employer. We do not require any recruitment fees from the candidate and do not collect applications from broker individuals or organizations who charge commissions/ fees from applicants. We thank you all candidates, but only the shortlisted will be contacted for interviews.
* Candidates are encouraged to visit our website to understand about us.
* Job type: full time permanent
* Employee type: local Vietnamese
POSITION SUMMARY
Responsible for the maintenance of all I&C systems and devices, promoting safe, environmentally friendly and effective maintenance practices within the electrical and I&C section. Assist in other areas of the plant as assigned. Oversees budgeting and spending for new capital I&C projects as well as routine operating and maintenance expenses assigned to the I&C team. Oversee contractors employed to work on I&C systems. Ensure that relevant information is kept updated to support the effective implementation of the defined maintenance strategy.
PRIMARY RESPONSIBILITIES
Duties and responsibilities for this position include but are not limited to the following:
• Promote and enforce safe, environmentally friendly and workmanlike maintenance practices within the section and supervised contractors.
• Ensure consistent improvement of I&C maintenance across the plant systems, guaranteeing continuous improvement of plant reliability and availability.
• Promote team development and training. Develop required procedures to ensure the established maintenance strategy is known and implemented. Provide leadership and job coordination on critical projects.
• Assist in high level maintenance planning and budgeting, assuming co-responsibility for approved plan and budget.
• Perform other comparable and related duties as assigned.
* VAPCO is a fair Employer. We do not require any recruitment fees from the candidate and do not collect applications from broker individuals or organizations who charge commissions/ fees from applicants. We thank you all candidates, but only the shortlisted will be contacted for interviews.
* Candidates are encouraged to visit our website to understand about us.
Yêu cầu công việc
EDUCATION, EXPERIENCE AND GENERAL REQUIREMENTS
• • Electrical, electronic, information, mechanical, chemical or similar Engineering Bachelor Degree is required.
• Minimum 10 years' experience in I&C (turbine) and/or I&C (boiler) maintenance supervision and management or equivalent industrial environment role, 3 years of which must be on a management role.
• Available to work overtime and/or weekends if required.
• Ability to conduct planning and problem analysis regarding I&C Part of the supercritical coal power plant.
• Interpret DCS logic drawing, PLC ladder drawing and Electrical drawing.
• Familiar with P&ID drawing, Calibration and periodic maintenance for local instrument and commonly used monitoring system such as Furnace monitoring system, Vibration analysis system (like system1), transmitters, etc.
• Familiar with the basic principle of high voltage electrical motor, auxiliary turbine, and hydraulic control system (solenoid valve, servo valve, etc.)
• Prefer a certificate of completion on DCS (Emerson, Siemens, Mitsubishi, etc.), TCS, PLC systems, Computer application system, and Thermal dynamic theory.
• Prefer a certificate of completion on the Environmental facilities (CEMS), the Furnace monitoring system (Tube leak, Combustion status).
• Prefer a certificate of completion for training courses on Super critical Coal power plant such as Turbine, Boiler, Generator or Efficiency of power plant.
• Prefer a certificate of completion for training courses on Process Control such as PID tuning, the basic principle of instrument sensors (pH, DO and O2 meter) and the basic measuring theory of local instruments.
• Possess business level communications skills in English (written and verbal) and be computer literate. Able to communicate/discuss any topic in the business environment.
• • Electrical, electronic, information, mechanical, chemical or similar Engineering Bachelor Degree is required.
• Minimum 10 years' experience in I&C (turbine) and/or I&C (boiler) maintenance supervision and management or equivalent industrial environment role, 3 years of which must be on a management role.
• Available to work overtime and/or weekends if required.
• Ability to conduct planning and problem analysis regarding I&C Part of the supercritical coal power plant.
• Interpret DCS logic drawing, PLC ladder drawing and Electrical drawing.
• Familiar with P&ID drawing, Calibration and periodic maintenance for local instrument and commonly used monitoring system such as Furnace monitoring system, Vibration analysis system (like system1), transmitters, etc.
• Familiar with the basic principle of high voltage electrical motor, auxiliary turbine, and hydraulic control system (solenoid valve, servo valve, etc.)
• Prefer a certificate of completion on DCS (Emerson, Siemens, Mitsubishi, etc.), TCS, PLC systems, Computer application system, and Thermal dynamic theory.
• Prefer a certificate of completion on the Environmental facilities (CEMS), the Furnace monitoring system (Tube leak, Combustion status).
• Prefer a certificate of completion for training courses on Super critical Coal power plant such as Turbine, Boiler, Generator or Efficiency of power plant.
• Prefer a certificate of completion for training courses on Process Control such as PID tuning, the basic principle of instrument sensors (pH, DO and O2 meter) and the basic measuring theory of local instruments.
• Possess business level communications skills in English (written and verbal) and be computer literate. Able to communicate/discuss any topic in the business environment.
Quyền lợi được hưởng
Thưởng
13th Salary payment
Chăm sóc sức khoẻ
Premium Healhcare for you
Nghỉ phép có lương
15 days annual leave per year
13th Salary payment
Chăm sóc sức khoẻ
Premium Healhcare for you
Nghỉ phép có lương
15 days annual leave per year
Thông tin khác
NGÀY ĐĂNG
19/06/2024
CẤP BẬC
Nhân viên
NGÀNH NGHỀ
Kỹ Thuật > Cơ Khí Tự Động Hoá
KỸ NĂNG
Instrument Control, Điều Khiển Tự Động, Instrument Maintenance, Control DCS, SCADA
LĨNH VỰC
Sản xuất và Phân phối Điện/Khí đốt/Nước
NGÔN NGỮ TRÌNH BÀY HỒ SƠ
Tiếng Anh
SỐ NĂM KINH NGHIỆM TỐI THIỂU
Không yêu cầu
QUỐC TỊCH
Không hiển thị
Xem thêm
19/06/2024
CẤP BẬC
Nhân viên
NGÀNH NGHỀ
Kỹ Thuật > Cơ Khí Tự Động Hoá
KỸ NĂNG
Instrument Control, Điều Khiển Tự Động, Instrument Maintenance, Control DCS, SCADA
LĨNH VỰC
Sản xuất và Phân phối Điện/Khí đốt/Nước
NGÔN NGỮ TRÌNH BÀY HỒ SƠ
Tiếng Anh
SỐ NĂM KINH NGHIỆM TỐI THIỂU
Không yêu cầu
QUỐC TỊCH
Không hiển thị
Xem thêm
Nộp hồ sơ liên hệ
VUNG ANG II THERMAL POWER LLC
Giới thiệu công ty
VUNG ANG II THERMAL POWER LLC việc làm
Vung Ang Economic Zone, Ky Loi Commune, Ky Anh Town, Ha Tinh Province, Viet Nam
Quy mô: Từ 101 - 500 nhân viên
Việc làm tương tự
Operation Shift Leader (Thermal Power Plant in Ha Tinh)
VUNG ANG II THERMAL POWER LLC
Cạnh tranh
Hà Tĩnh
31/07/2024
Electrical Leader (For Thermal Power Plant)
VUNG ANG II THERMAL POWER LLC
Thỏa thuận
Hà Tĩnh
19/07/2024
Boiler Engineer (For Thermal Power Plant)
VUNG ANG II THERMAL POWER LLC
Thỏa thuận
Hà Tĩnh
31/07/2024
Turbine Technician (Working In Ha Tinh)
VUNG ANG II THERMAL POWER LLC
Thỏa thuận
Hà Tĩnh, Nghệ An, Trà Vinh
19/07/2024
Turbine Technician (Working In Ha Tinh)
VUNG ANG II THERMAL POWER LLC
Cạnh tranh
Hà Tĩnh, Nghệ An, Quảng Bình
08/07/2024
Coal Logistics Leader (Working in Ha Tinh)
VUNG ANG II THERMAL POWER LLC
Cạnh tranh
Hà Tĩnh
31/07/2024
Demi Water/wwt Operator (Working In Ha Tinh)
VUNG ANG II THERMAL POWER LLC
Thỏa thuận
Hà Tĩnh, Nghệ An, Quảng Bình
12/07/2024
Nhân Viên Tìm Kiếm Thông Tin Bất Động Sản
CÔNG TY CỔ PHẦN TẬP ĐOÀN PHÚ THẮNG DAY GROUP
8 - 12 triệu
Hà Nội, Hà Tĩnh
27/07/2024
Trình Dược Viên OTC - Hà Nội, Quảng Ninh, Hà Tĩnh, Hưng Yên, Ninh Bình
Công ty Cổ phần Dược phẩm TV.PHARM
10 - 20 triệu VND
Hà Nội, Hà Tĩnh, Hưng Yên, Ninh Bình, Quảng Ninh
03/07/2024
Vị trí Turbine Leader (Thermal Power Plant, in Ha Tinh) do công ty VUNG ANG II THERMAL POWER LLC tuyển dụng tại Hà Tĩnh, Joboko tự động tổng hợp mức lương Thỏa thuận, tìm thêm việc làm về Turbine Leader (Thermal Power Plant, in Ha Tinh) hoặc công ty VUNG ANG II THERMAL POWER LLC ở các link phía trên
Giới thiệu công ty
VUNG ANG II THERMAL POWER LLC việc làm
Vung Ang Economic Zone, Ky Loi Commune, Ky Anh Town, Ha Tinh Province, Viet Nam
Quy mô: Từ 101 - 500 nhân viên