I&C Engineer (For Thermal Power Plant)VUNG ANG II THERMAL POWER LLC
Nơi làm việc: Hà Tĩnh
Ngành nghề: IT phần mềm, Bảo trì / Sửa chữa, IT phần cứng/mạng, Kỹ thuật, Kỹ thuật ứng dụng, Cơ khí chế tạo / Điện / Điện tử / Tự động hóa, QA-QC/ Thẩm định/ Giám định, Cơ khí - Chế tạo
Thu nhập: Cạnh tranh
Hình thức: Toàn thời gian
Ngày đăng: 01/11/2024
Hạn nộp: 17/12/2024
Mô tả công việc
* Work location: Vung Ang Economic Zone, Ha Tinh Province, Vietnam
* Job type: full time permanent
* Employee type: local Vietnamese
POSITION SUMMARY
- Responsible for installation, programming, troubleshooting, upkeep and repair of plant control systems and components of all technologies (pneumatic, electric, electronic, hydraulic, mechanical, etc.) including data collection, transmission, and processing within plant sensors, devices, computers, and control systems in the control room and elsewhere in the plant. Responsible for calibrating all meters, transmitters, gauges, flowmeters, and other electrical and pneumatic devices. Responsible for maintenance of the plant's DCS system and other control loops for plant processes. Works closely with operations staff and other plant engineers. Maintain manuals, procedures, historical information, CMMS and inspection records ensuring adequate update. Assist in other areas of the plant as assigned.
PRIMARY RESPONSIBILITIES
Duties and responsibilities for this position include but are not limited to the following:
- Perform maintenance duties in a safe, environmentally friendly and workmanlike manner.
- Based on experience, equipment history and O&M manuals establish scope, frequency and method for preventive and corrective maintenance tasks on I&C (turbine) and related control equipment.
- Specify and procure I&C (turbine) spares and services as required.
- Supervise work on attributed system ensuring safe, effective and efficient implementation of work method statement.
- Prepare, maintain and update documentation, reports and CMMS as required.
- Perform other comparable and related duties as assigned.
* VAPCO is a fair Employer. We do not require any recruitment fees from the candidate and do not collect applications from broker individuals or organizations who charge commissions/ fees from applicants. We thank you all candidates, but only the shortlisted will be contacted for interviews.
* Candidates are encouraged to visit our website to understand about us.
* Job type: full time permanent
* Employee type: local Vietnamese
POSITION SUMMARY
- Responsible for installation, programming, troubleshooting, upkeep and repair of plant control systems and components of all technologies (pneumatic, electric, electronic, hydraulic, mechanical, etc.) including data collection, transmission, and processing within plant sensors, devices, computers, and control systems in the control room and elsewhere in the plant. Responsible for calibrating all meters, transmitters, gauges, flowmeters, and other electrical and pneumatic devices. Responsible for maintenance of the plant's DCS system and other control loops for plant processes. Works closely with operations staff and other plant engineers. Maintain manuals, procedures, historical information, CMMS and inspection records ensuring adequate update. Assist in other areas of the plant as assigned.
PRIMARY RESPONSIBILITIES
Duties and responsibilities for this position include but are not limited to the following:
- Perform maintenance duties in a safe, environmentally friendly and workmanlike manner.
- Based on experience, equipment history and O&M manuals establish scope, frequency and method for preventive and corrective maintenance tasks on I&C (turbine) and related control equipment.
- Specify and procure I&C (turbine) spares and services as required.
- Supervise work on attributed system ensuring safe, effective and efficient implementation of work method statement.
- Prepare, maintain and update documentation, reports and CMMS as required.
- Perform other comparable and related duties as assigned.
* VAPCO is a fair Employer. We do not require any recruitment fees from the candidate and do not collect applications from broker individuals or organizations who charge commissions/ fees from applicants. We thank you all candidates, but only the shortlisted will be contacted for interviews.
* Candidates are encouraged to visit our website to understand about us.
Yêu cầu
EDUCATION, EXPERIENCE AND GENERAL REQUIREMENTS
- Electrical, electronic, information, mechanical, chemical or similar Engineering Bachelor Degree required.
- Minimum 3 years' experience in plant maintenance engineering or equivalent industrial environment including maintenance engineering of plant I&C(turbine) equipment and maintenance work planning.
- Available to work overtime, weekends and shift work if necessary.
- Interpret DCS logic drawing, P&I drawing, PLC ladder drawing and Electrical single line drawing
- Familiar with P&ID drawing, Calibration and periodic maintenance for local instruments and commonly used monitoring system such as Furnace monitoring system, Vibration analysis, transmitters, etc.
- Ability to use instrument equipment such as Calibrator, Tester, Oscilloscope, Recorder.
- Prefer a certificate of completion related to DCS, TCS, PLC Systems, Computer application system.
- Prefer a certificate of completion on the training course related to O&M for super critical coal power plant.
- Prefer a certificate of completion for training courses on Process Control such as PID tuning, the basic principle of instrument sensors and the basic measuring theory of local instruments.
- Possess advanced level communications skills in English (written and verbal) and be computer literate. Able to communicate using advanced vocabularies.
- Electrical, electronic, information, mechanical, chemical or similar Engineering Bachelor Degree required.
- Minimum 3 years' experience in plant maintenance engineering or equivalent industrial environment including maintenance engineering of plant I&C(turbine) equipment and maintenance work planning.
- Available to work overtime, weekends and shift work if necessary.
- Interpret DCS logic drawing, P&I drawing, PLC ladder drawing and Electrical single line drawing
- Familiar with P&ID drawing, Calibration and periodic maintenance for local instruments and commonly used monitoring system such as Furnace monitoring system, Vibration analysis, transmitters, etc.
- Ability to use instrument equipment such as Calibrator, Tester, Oscilloscope, Recorder.
- Prefer a certificate of completion related to DCS, TCS, PLC Systems, Computer application system.
- Prefer a certificate of completion on the training course related to O&M for super critical coal power plant.
- Prefer a certificate of completion for training courses on Process Control such as PID tuning, the basic principle of instrument sensors and the basic measuring theory of local instruments.
- Possess advanced level communications skills in English (written and verbal) and be computer literate. Able to communicate using advanced vocabularies.
Quyền lợi
13th Salary payment
Premium Healhcare for you
15 days annual leave per year
Accommodation
Premium Healhcare for you
15 days annual leave per year
Accommodation
Thông tin khác
Thị xã Kỳ Anh,
Hà Tĩnh
Hà Tĩnh
Giới thiệu công ty
VUNG ANG II THERMAL POWER LLC việc làm
Vung Ang Economic Zone, Ky Loi Commune, Ky Anh Town, Ha Tinh Province, Viet Nam
Quy mô: Từ 101 - 500 nhân viên
Việc làm tương tự
Chuyên Viên Công Nghệ Thông Tin (BA)
công ty dịch vụ mobifone khu vực 6 - cn tổng công ty viễn thông mobifone
10 - 25 triệu
Hà Tĩnh, Nghệ An, Quảng Bình, Thanh Hóa
30/11/2024
Electrical Leader (For Thermal Power Plant)
VUNG ANG II THERMAL POWER LLC
Cạnh tranh
Hà Tĩnh
17/12/2024
Control Room Operator (BLR, TBN) (For Thermal Power Plant)
VUNG ANG II THERMAL POWER LLC
Cạnh tranh
Hà Tĩnh
17/12/2024
Nhân Viên Hành Chính Nhân Sự - Đi làm luôn
Công ty cổ phần thương mại địa ốc 5 sao hải phòng
Từ 7 triệu VNĐ
Hải Phòng, Hà Tĩnh
20/12/2024
Vị trí I&C Engineer (For Thermal Power Plant) do công ty VUNG ANG II THERMAL POWER LLC tuyển dụng tại Hà Tĩnh, Joboko tự động tổng hợp mức lương Cạnh tranh, tìm thêm việc làm về I&C Engineer (For Thermal Power Plant) hoặc công ty VUNG ANG II THERMAL POWER LLC ở các link phía trên
Giới thiệu công ty
VUNG ANG II THERMAL POWER LLC việc làm
Vung Ang Economic Zone, Ky Loi Commune, Ky Anh Town, Ha Tinh Province, Viet Nam
Quy mô: Từ 101 - 500 nhân viên