Manufacturing EngineerCông ty TNHH Premo Việt Nam
Nơi làm việc: Quảng Nam
Ngành nghề: Quản lý điều hành, Sản xuất / Vận hành sản xuất, Cơ khí chế tạo / Điện / Điện tử / Tự động hóa
Lương: Thỏa thuận
Hình thức: Toàn thời gian
Ngày đăng: 30/05/2024
Hạn nộp: 27/06/2024
Vị trí công việc này hiện tại đã hết hạn nộp hồ sơ, bạn có thể tham khảo thêm một số công việc liên quan phía dưới
Mô tả công việc
1. Production:
- Responsible for updating the document in mass production (work instructions, start-up checklist...). Ensure the document used in production is the right version.
- Review the Pareto of scrap in line and take the corrective action to reduce the scrap through the QRQC meeting.
- Support the production supervisor to control the efficiency and production fulfillment to achieve the target.
- Manage quantity and status of measuring tools, golden samples, and equipment in the production area. Ensure all tools and equipment are validated. Inform the related department if tools or equipment need to be improved or out of validation.
- Monitoring Maintenance level 1 is fullfilled.
- Prepare training plan & WI and perform training for the Production team.
2. New project:
- Involve with Engineering on new industrialization project. Review and advise on engineering design tools and technology for new projects.
- Confirm the parameters of each station on a new project from the Engineering team.
- Support for another department to build PFMEA of the new process.
- Prepare WI, startup checklist, SPC chart, maintenance level 1 for each station, and conduct training for production teams on new processes and equipment.
3. Continual Improvement:
- Take leadership to lead the kaizen, continuous improvement activities in the production line, to increase efficiency, and reduce scrap.
- Implement Poka Yoke for each station in line to avoid defects and mistakes from the Operator.
- Developing and implementing projects to improve manufacturing processes and reduce costs.
4. Manage the Change in process:
- Cooperating with Quality Process to solve the issues that arise in the production area and inform the manager in time.
- Responsible for the change in the production line to ensure there are not any changes without approval. Update document related to change and training for Line Leader and Operator.
5. Transfer project:
- Provide a list of tools, equipment, machines, spare parts, and non-BOM consumption.
- Provide lesson learned of process.
Yêu cầu công việc
- Education: Bachelor's degree and suitable technical degree in technical schools.
- Experience: Advanced experience level as manufacturing engineer or strong mechanical experience at least 3 years.
- Have knowledge about Manufacturing industry, Lean manufacturing. Have risk assessment skill.
- Good use of Solidworks.
- Good English.
Quyền lợi được hưởng
- Shuttle bus for transportation.
- Annual healthcare, 24/24 insurance.
- Good benefits, 13th month salary, holiday bonus.
- Teambuilding and many excited activities to warm up spirit.
- Skill and specializing training.
Nộp hồ sơ liên hệ
HR
Công ty TNHH Premo Việt Nam
Giới thiệu công ty
Công ty TNHH Premo Việt Nam việc làm
Đường số 8, KCN Điện Nam Điện Ngọc, Điện Bàn, Quảng Nam
Quy mô: Từ 501 - 1000 nhân viên
Việc làm tương tự
(CÔNG TY K-PRODUCTS - QUẢNG NAM) TRƯỞNG PHÒNG HÀNH CHÍNH NHÂN SỰ
Công Ty Cổ Phần K Products
17 - 20 triệu
Quảng Nam
04/07/2024
Trưởng Phòng Xuất Nhập Khẩu
Công Ty TNHH MTV Giải Pháp Kho Hàng Jracking Việt Nam
15 - 25 triệu
Quảng Nam
20/08/2024
Vị trí Manufacturing Engineer do công ty Công ty TNHH Premo Việt Nam tuyển dụng tại Quảng Nam, Joboko tự động tổng hợp mức lương Thỏa thuận, tìm thêm việc làm về Manufacturing Engineer hoặc công ty Công ty TNHH Premo Việt Nam ở các link phía trên
Giới thiệu công ty
Công ty TNHH Premo Việt Nam việc làm
Đường số 8, KCN Điện Nam Điện Ngọc, Điện Bàn, Quảng Nam
Quy mô: Từ 501 - 1000 nhân viên