- Chi tiết công việc
- Giới thiệu công ty
Thu nhập: Thỏa thuận
Loại hình: Toàn thời gian
Chức vụ: Nhân viên
Kinh nghiệm: 3 - 5 năm
Mô tả công việc
Department: Production Engineering
Reports To: PE Manager
We need to recruit the following positions:
1. BOM/Drawing Management Engineer
2. Production Electrical Engineer
3. Electrical Part Engineer
4. Packaging Engineer
5. Metal Part Engineer
Essential functions and key responsibilities are:
1.BOM/Drawing Management Engineer
● Manage the BOM/Drawing of all sewing machine models.
● Updating, checking and confirming to release the BOM, Drawing and Operation Manual.
● Prepare and update QC sheets, manuals, check sheets for manufacturing section
● Manage and maintain the accuracy of the BOM contents, drawings and operating instructions - no affect production.
● Evaluates the component quality and supplier performance.
● Timely update the changes in design, BOM, drawings and inform all teams.
● Responsible for managing the BOM/Drawing management procedure of the technical team.
● Support for production in terms of job request.
● Periodically report to the supervisor and technical leader.
● Perform other tasks as assigned.
2.Production Electrical Engineer
• Own & drive pre-production and production phase to ensure product meets requirements.
• Support prototyping phase to ensure product meets requirements.
• Study assembly methods and calculate cutting time for products.
• Investigate root cause, take countermeasures and improvement for reduction defects.
• Resolve problems using solutions that involve new techniques and technologies.
• Searching, selection and execution to invest machines, equipment, tooling, sub materials for manufacturing, Prepare necessary items for implemental new products.
• Improve process for ensuring capacity and reducing cost.
• Prepare and update QC sheets, manuals, check sheets for manufacturing section
• Evaluates and resolves production issues, technical feasibility and design optimization.
• Evaluates the electrical component quality and supplier performance.
• Coordinate with the quality control team to fix and improve product quality.
• Support for production in terms of job requests.
• Observe safety and housekeeping at workstation.
• Technical detail report making and periodically report to the supervisor.
• Perform other tasks as assigned.
• 3.Electrical Part Engineer
• Electrical/Electronic new part development control.
• DFM checking and confirming with R&D team.
• New product regulatory requirements control experience is an advantage.
• Ensure conformance to the quality system requirement (FMEA, Control plan and TCM).
• Responsible for quality, yield, cost, and cycle time improvement.
• Evaluates the component quality and supplier performance.
• Coordinate with R&D team to lead the prototyping phase to ensure the product meets requirements.
• Evaluates and resolves production issues, technical feasibility, and design optimization.
• Coordinate with the leader of all teams to lead the product quality improvement.
• Support for production in terms of job requests.
• Own & drive pre-production and production phase to ensure product meets requirements.
• Improve process for ensuring capacity and reducing cost.
• Technical detail report making and periodically report to the PE leader.
Perform other tasks as assigned
4.Packaging Engineer
● Carton/Styrofoam new part development control.
● DFM checking and confirming with R&D team.
● New product regulatory requirements control experience is an advantage.
● Ensure conformance to the quality system requirement (FMEA, Control plan and TCM).
● Responsible for quality, yield, cost, and cycle time improvement.
● Evaluates the component quality and supplier performance.
● Coordinate with R&D team to lead the prototyping phase to ensure the product meets requirements.
● Evaluates and resolves production issues, technical feasibility, and design optimization.
● Coordinate with the leader of all teams to lead the product quality improvement.
● Support for production in terms of job requests.
● Own & drive pre-production and production phase to ensure product meets requirements.
● Improve process for ensuring capacity and reducing cost.
● Technical detail report making and periodically report to the PE leader.
● Perform other tasks as assigned.
5. Metal Part Engineer
● Metal new part development control.
● DFM checking and confirming with R&D team.
● New product regulatory requirements control experience is an advantage.
● Ensure conformance to the quality system requirement (FMEA, Control plan and TCM).
● Responsible for quality, yield, cost, and cycle time improvement.
● Evaluates the component quality and supplier performance.
● Coordinate with R&D team to lead the prototyping phase to ensure the product meets requirements.
● Evaluates and resolves production issues, technical feasibility, and design optimization.
● Coordinate with the leader of all teams to lead the product quality improvement.
● Support for production in terms of job requests.
● Own & drive pre-production and production phase to ensure product meets requirements.
● Improve process for ensuring capacity and reducing cost.
● Technical detail report making and periodically report to the PE leader.
Perform other tasks as assigned
Reports To: PE Manager
We need to recruit the following positions:
1. BOM/Drawing Management Engineer
2. Production Electrical Engineer
3. Electrical Part Engineer
4. Packaging Engineer
5. Metal Part Engineer
Essential functions and key responsibilities are:
1.BOM/Drawing Management Engineer
● Manage the BOM/Drawing of all sewing machine models.
● Updating, checking and confirming to release the BOM, Drawing and Operation Manual.
● Prepare and update QC sheets, manuals, check sheets for manufacturing section
● Manage and maintain the accuracy of the BOM contents, drawings and operating instructions - no affect production.
● Evaluates the component quality and supplier performance.
● Timely update the changes in design, BOM, drawings and inform all teams.
● Responsible for managing the BOM/Drawing management procedure of the technical team.
● Support for production in terms of job request.
● Periodically report to the supervisor and technical leader.
● Perform other tasks as assigned.
2.Production Electrical Engineer
• Own & drive pre-production and production phase to ensure product meets requirements.
• Support prototyping phase to ensure product meets requirements.
• Study assembly methods and calculate cutting time for products.
• Investigate root cause, take countermeasures and improvement for reduction defects.
• Resolve problems using solutions that involve new techniques and technologies.
• Searching, selection and execution to invest machines, equipment, tooling, sub materials for manufacturing, Prepare necessary items for implemental new products.
• Improve process for ensuring capacity and reducing cost.
• Prepare and update QC sheets, manuals, check sheets for manufacturing section
• Evaluates and resolves production issues, technical feasibility and design optimization.
• Evaluates the electrical component quality and supplier performance.
• Coordinate with the quality control team to fix and improve product quality.
• Support for production in terms of job requests.
• Observe safety and housekeeping at workstation.
• Technical detail report making and periodically report to the supervisor.
• Perform other tasks as assigned.
• 3.Electrical Part Engineer
• Electrical/Electronic new part development control.
• DFM checking and confirming with R&D team.
• New product regulatory requirements control experience is an advantage.
• Ensure conformance to the quality system requirement (FMEA, Control plan and TCM).
• Responsible for quality, yield, cost, and cycle time improvement.
• Evaluates the component quality and supplier performance.
• Coordinate with R&D team to lead the prototyping phase to ensure the product meets requirements.
• Evaluates and resolves production issues, technical feasibility, and design optimization.
• Coordinate with the leader of all teams to lead the product quality improvement.
• Support for production in terms of job requests.
• Own & drive pre-production and production phase to ensure product meets requirements.
• Improve process for ensuring capacity and reducing cost.
• Technical detail report making and periodically report to the PE leader.
Perform other tasks as assigned
4.Packaging Engineer
● Carton/Styrofoam new part development control.
● DFM checking and confirming with R&D team.
● New product regulatory requirements control experience is an advantage.
● Ensure conformance to the quality system requirement (FMEA, Control plan and TCM).
● Responsible for quality, yield, cost, and cycle time improvement.
● Evaluates the component quality and supplier performance.
● Coordinate with R&D team to lead the prototyping phase to ensure the product meets requirements.
● Evaluates and resolves production issues, technical feasibility, and design optimization.
● Coordinate with the leader of all teams to lead the product quality improvement.
● Support for production in terms of job requests.
● Own & drive pre-production and production phase to ensure product meets requirements.
● Improve process for ensuring capacity and reducing cost.
● Technical detail report making and periodically report to the PE leader.
● Perform other tasks as assigned.
5. Metal Part Engineer
● Metal new part development control.
● DFM checking and confirming with R&D team.
● New product regulatory requirements control experience is an advantage.
● Ensure conformance to the quality system requirement (FMEA, Control plan and TCM).
● Responsible for quality, yield, cost, and cycle time improvement.
● Evaluates the component quality and supplier performance.
● Coordinate with R&D team to lead the prototyping phase to ensure the product meets requirements.
● Evaluates and resolves production issues, technical feasibility, and design optimization.
● Coordinate with the leader of all teams to lead the product quality improvement.
● Support for production in terms of job requests.
● Own & drive pre-production and production phase to ensure product meets requirements.
● Improve process for ensuring capacity and reducing cost.
● Technical detail report making and periodically report to the PE leader.
Perform other tasks as assigned
Yêu cầu
QUALIFICATIONS/REQUIREMENTS:
Experience:
● At least 3-5 years working experiences as production engineer or BOM/Drawing management engineer.
● Have experience in sewing machine.
● System processing experience - specifically, SAP.
Skills/personal qualifications:
● Reading & analyze technical drawing interpretation, 3D modelling, engineering documents.
● Proactive, aggressive, high level of autonomy, well-organized and hardworking.
● Good communication and presentation skills.
● High level of autonomy, experience in working in fast moving.
● Good at MS Office & Internet Application and SAP system.
● Knowledge of regulatory and safety requirements related to technical designing.
● Team work to solve problem happened during production and advice on corrective actions.
● English communication skills are required.
● More experience of sewing machines is advantageous
Education and Certifications:
● University degree in Industrial Engineering or related discipline.
Experience:
● At least 3-5 years working experiences as production engineer or BOM/Drawing management engineer.
● Have experience in sewing machine.
● System processing experience - specifically, SAP.
Skills/personal qualifications:
● Reading & analyze technical drawing interpretation, 3D modelling, engineering documents.
● Proactive, aggressive, high level of autonomy, well-organized and hardworking.
● Good communication and presentation skills.
● High level of autonomy, experience in working in fast moving.
● Good at MS Office & Internet Application and SAP system.
● Knowledge of regulatory and safety requirements related to technical designing.
● Team work to solve problem happened during production and advice on corrective actions.
● English communication skills are required.
● More experience of sewing machines is advantageous
Education and Certifications:
● University degree in Industrial Engineering or related discipline.
Quyền lợi
Thưởng
Negotiable, fair and attractive competitive enviroment. Considering annual salary increase + Bonus
Chăm sóc sức khoẻ
Social insurance, health insurance, unemployment insurance according to the provisions of labor law
Đào tạo
Day off: All Saturdays, Sundays and annual leave according to the provisions of the Labor Code.
Negotiable, fair and attractive competitive enviroment. Considering annual salary increase + Bonus
Chăm sóc sức khoẻ
Social insurance, health insurance, unemployment insurance according to the provisions of labor law
Đào tạo
Day off: All Saturdays, Sundays and annual leave according to the provisions of the Labor Code.
Thông tin khác
NGÀY ĐĂNG
29/10/2024
CẤP BẬC
Nhân viên
NGÀNH NGHỀ
Kỹ Thuật > Cơ Khí Tự Động Hoá
KỸ NĂNG
Production, Industrial Engineering, Design Drawing, Packaging, 3D Model
LĨNH VỰC
Sản xuất
NGÔN NGỮ TRÌNH BÀY HỒ SƠ
Bất kỳ
SỐ NĂM KINH NGHIỆM TỐI THIỂU
3
QUỐC TỊCH
Không hiển thị
Xem thêm
29/10/2024
CẤP BẬC
Nhân viên
NGÀNH NGHỀ
Kỹ Thuật > Cơ Khí Tự Động Hoá
KỸ NĂNG
Production, Industrial Engineering, Design Drawing, Packaging, 3D Model
LĨNH VỰC
Sản xuất
NGÔN NGỮ TRÌNH BÀY HỒ SƠ
Bất kỳ
SỐ NĂM KINH NGHIỆM TỐI THIỂU
3
QUỐC TỊCH
Không hiển thị
Xem thêm
Thông tin chung
- Thu nhập: Thỏa thuận
Cách thức ứng tuyển
Ứng viên nộp hồ sơ trực tuyến bằng cách bấm nút Ứng tuyển bên dưới:
Hạn nộp: 29/11/2024
Giới thiệu công ty
Xem trang công ty
Công ty chưa cập nhật thông tin....
Quy mô công ty
Từ 501 - 1000 nhân viên
Việc làm tương tự
CÔNG TY CỔ PHẦN HÀNG TIÊU DÙNG MASAN (MASAN CONSUMER)
Thương lượng
11/11/2024
Hải Dương
CÔNG TY CỔ PHẦN CƠ ĐIỆN VÀ PCCC THĂNG LONG
8 Tr - 20 Tr VND
30/11/2024
Hà Nội, Bắc Giang, Bắc Ninh, Hải Dương, Nam Định, Quảng Ninh
Công ty Cổ Phần Giải Pháp Kỹ Thuật Công Nghệ Việt
Trên 12 triệu
08/11/2024
Hải Phòng, Hải Dương
CÔNG TY CỔ PHẦN CƠ ĐIỆN VÀ PCCC THĂNG LONG
8 Tr - 16 Tr VND
30/11/2024
Bắc Giang, Bắc Ninh, Hải Dương, Nam Định, Quảng Bình, Quảng Ninh
CÔNG TY CỔ PHẦN DAIKIN AIR CONDITIONING (VIETNAM)
Thỏa thuận
23/11/2024
Hà Nội, Hồ Chí Minh, Hải Dương, Hưng Yên
hỗ trợ doanh nghiệp
Giải thưởng
của chúng tôi
Top 3
Nền tảng số tiêu biểu của Bộ
TT&TT 2022.
Top 15
Startup Việt xuất sắc 2019 do VNExpress tổ chức.
Top 10
Doanh nghiệp khởi nghiệp sáng tạo Việt Nam - Hội đồng tư vấn kinh doanh ASEAN bình chọn.
Giải Đồng
Sản phẩm công nghệ số Make In Viet Nam 2023.