Commissioning Technical Advisor
- Thỏa thuận
- 5 năm kinh nghiệm
Hạn nộp hồ sơ: 18/01/2027 (Còn 60 ngày)
Ứng tuyển sớm để được ưu tiên
Kết nối với Nhà tuyển dụng để tìm hiểu thông tin và gia tăng cơ hội trúng tuyển
Nhà tuyển dụng đang online
Mô tả công việc
To do incoming inspection of components and tools inspections to be performed in port.
Support to transport equipment returning and tools return.
Provide support to installation team and blade repair activities.
Perform functional testing of turbine subsystems (electrical, mechanical, hydraulic, yaw, pitch, and braking systems)
Configure and verify turbine control software and SCADA communication
Identify, troubleshoot, and resolve faults discovered during start‐up
Conduct energization procedures, including LV/MV testing
Ensure compliance with OEM specifications, commissioning protocols, and safety regulations
Complete all commissioning checklists and documentation for final approval
Coordinate with installation teams, engineers, SCADA teams, and grid operators
Support initial turbine operation, including monitoring performance during early running hours
Responsible for commissioning of Wind Turbine Generators (WTGs) as per project schedule
Perform the commissioning activities as per the project schedule. Execute reliability tests on WTGs as per Contractual requirements
Achieve Loss Production Factor (LPF) targets as per Vestas requirements. Handing over of WTGs to Customer / Vestas' Customer Service department
Support installation activities as may be required at the site
Conduct due diligence check of mechanical and electrical completion of WTG prior to commissioning.
Responsible for commissioning of WTGs as per Vestas Standards and adhering to project schedules.
Planning, maintaining, and optimizing commissioning spares & calibration tools, Personal protective equipment (PPEs), and maintain all related records.
Analyzing the WTG performance after commissioning and preparation for conducting reliability tests.
Managing non-conformity reports (NCRs) of commissioning.
Perform WTG audits, closing of punch lists, and handing over WTGs to Customer/ Vestas Customer Service Department.
Support in installation activities viz-a-viz crane co-ordination, material co-ordination, unloading/ loading, preparation & rigging activities.
Impart on the job training on commissioning to installation engineers/ freshers and contribute to the development of the Installation & Commissioning organization.
Work closely with all relevant stakeholders to ensure progress in as per project schedule.
Initiate mitigation measures in the event of any anticipated delay in commissioning progress.
Support to transport equipment returning and tools return.
Provide support to installation team and blade repair activities.
Perform functional testing of turbine subsystems (electrical, mechanical, hydraulic, yaw, pitch, and braking systems)
Configure and verify turbine control software and SCADA communication
Identify, troubleshoot, and resolve faults discovered during start‐up
Conduct energization procedures, including LV/MV testing
Ensure compliance with OEM specifications, commissioning protocols, and safety regulations
Complete all commissioning checklists and documentation for final approval
Coordinate with installation teams, engineers, SCADA teams, and grid operators
Support initial turbine operation, including monitoring performance during early running hours
Responsible for commissioning of Wind Turbine Generators (WTGs) as per project schedule
Perform the commissioning activities as per the project schedule. Execute reliability tests on WTGs as per Contractual requirements
Achieve Loss Production Factor (LPF) targets as per Vestas requirements. Handing over of WTGs to Customer / Vestas' Customer Service department
Support installation activities as may be required at the site
Conduct due diligence check of mechanical and electrical completion of WTG prior to commissioning.
Responsible for commissioning of WTGs as per Vestas Standards and adhering to project schedules.
Planning, maintaining, and optimizing commissioning spares & calibration tools, Personal protective equipment (PPEs), and maintain all related records.
Analyzing the WTG performance after commissioning and preparation for conducting reliability tests.
Managing non-conformity reports (NCRs) of commissioning.
Perform WTG audits, closing of punch lists, and handing over WTGs to Customer/ Vestas Customer Service Department.
Support in installation activities viz-a-viz crane co-ordination, material co-ordination, unloading/ loading, preparation & rigging activities.
Impart on the job training on commissioning to installation engineers/ freshers and contribute to the development of the Installation & Commissioning organization.
Work closely with all relevant stakeholders to ensure progress in as per project schedule.
Initiate mitigation measures in the event of any anticipated delay in commissioning progress.
Yêu cầu
At least 5 years related working experience as commissioning technicians, among which 2-3 years' experience in project specific wind turbine model project execution.
Education in electrical engineering, mechanical engineering or related
Must hold Valid Vestas training, GWO and country specific training certifications
Strong knowledge of electrical systems (HV/LV), mechanical systems, and hydraulics
Ability to work with turbine diagnostic tools and SCADA systems
Experience with software uploads, parameter settings, and control system validation
Advanced troubleshooting and analytical skills
Familiarity with wind turbine safety protocols (GWO, WTSR, LOTO, high‐voltage safety)
Ability to work at heights and in demanding outdoor conditions
Good understanding of Electrical circuits / Hydraulic circuits and drive trains in WTGs.
Hands-on experience in troubleshooting and rectification.
Basic knowledge in safety and working at heights.
Basic computing skills and ability to work on online reporting systems.
Effective Communication skills.
Effective reporting skills.
Proficiency in coordinating skills.
Education in electrical engineering, mechanical engineering or related
Must hold Valid Vestas training, GWO and country specific training certifications
Strong knowledge of electrical systems (HV/LV), mechanical systems, and hydraulics
Ability to work with turbine diagnostic tools and SCADA systems
Experience with software uploads, parameter settings, and control system validation
Advanced troubleshooting and analytical skills
Familiarity with wind turbine safety protocols (GWO, WTSR, LOTO, high‐voltage safety)
Ability to work at heights and in demanding outdoor conditions
Good understanding of Electrical circuits / Hydraulic circuits and drive trains in WTGs.
Hands-on experience in troubleshooting and rectification.
Basic knowledge in safety and working at heights.
Basic computing skills and ability to work on online reporting systems.
Effective Communication skills.
Effective reporting skills.
Proficiency in coordinating skills.
Quyền lợi
Infomation :
Thông tin chung
- Thu nhập: Thương lượng
Việc làm tương tự khác
Công Ty TNHH TM DV Điện Mạnh Phương
Hà Nội
12-18 triệu VND
CÔNG TY TNHH HOMICHI
Hà Nội
10 - 18 triệu VND + % Hoa Hồng
Công ty TNHH Anabuki NL Housing Service Việt Nam
Hồ Chí Minh, Bình Dương
Từ 8 - 9 triệu VND
Công ty Cổ phần Đầu tư và Thi công Hạ tầng VinAlpha
Hà Nội, Hồ Chí Minh, Khánh Hòa
14 - 18 triệu VND
CÔNG TY TNHH GIẢI PHÁP KỸ THUẬT DỊCH VỤ TÂM VIỆT
Hồ Chí Minh
9,000,000 - 12,000,000 VND
CÔNG TY TNHH KỸ THUẬT VBS
Hồ Chí Minh
12-18 triệu VND
CÔNG TY TNHH CANON VIỆT NAM
Hà Nội, Bắc Ninh
11 - 12 Triệu
Công ty Cổ phần Đào tạo Kỹ thuật PVD PVD Training
Xem trang công ty- Địa chỉ công ty: KCN Đông Xuyên, Đường 30/4, Phường Rạch Dừa, Thành phố Vũng Tàu, Tỉnh BRVT, Việt Nam.
- Quy mô: Từ 101 - 500 nhân viên
- Lĩnh vực: Kỹ thuật
Thông tin công việc
Vị trí:
Nhân viên
Hình thức làm việc:
Toàn thời gian
Việc làm tương tự
[TP.HCM] Kỹ Sư Triển Khai Bản Vẽ Xây Dựng - Tiếng Nhật N3+, Từ 3 Năm Kinh Nghiệm
CÔNG TY TNHH SANKEN SCUBE
Hồ Chí Minh
Thỏa Thuận
[HCM] Nhân Viên Thiết Kế Nhiệt Lạnh - HVAC | Nghỉ Thứ 7 & Chủ Nhật
CÔNG TY CP JESCO ASIA
Hồ Chí Minh
Thỏa Thuận
[HN] Kỹ Sư Thiết Kế Điện - Lương 15-25 Triệu
Công ty Cổ phần Đầu tư Xây dựng và Công Nghệ VINCI E&C
Hà Nội
15 - 25 triệu VND + PC
Cảnh báo dấu hiệu lừa đảo tuyển dụng
Đội ngũ hỗ trợ của JobOKO sẵn sàng đồng hành, tư vấn và giới thiệu những cơ hội việc làm phù hợp, giúp Ứng viên tự tin phát triển sự nghiệp và chinh phục mục tiêu nghề nghiệp bền vững.
Hotline CSKH
1900.63.63.84
Công ty Cổ phần JobOKO Toàn cầu
Đội ngũ hỗ trợ của JobOKO luôn chủ động tư vấn các giải pháp tuyển dụng tối ưu, cam kết đồng hành và hỗ trợ Quý Nhà tuyển dụng đạt được hiệu quả tuyển dụng bền vững.
Hotline CSKH
02473.068.388
Công ty Cổ phần JobOKO Toàn cầu