Electronic Engineer
- Thỏa thuận
- 3 năm kinh nghiệm
Hạn nộp hồ sơ: 12/09/2026 (Còn 17 ngày)
Ứng tuyển sớm để được ưu tiên
Kết nối với Nhà tuyển dụng để tìm hiểu thông tin và gia tăng cơ hội trúng tuyển
Nhà tuyển dụng đang online
Bradford Jacobs is assisting an AI drone solutions company, offering cutting-edge aerial solutions across a range of sectors, including construction, agriculture, real estate, environmental monitoring, and infrastructure inspection. Their mission is to harness drone technology to deliver high-quality data, insights, and visual content to enable clients to make informed decisions.
About the role
We are seeking Electronics Engineers to design and integrate electronic subsystems into hardware products. This role focuses on microcontroller-based circuits, sensor integration, communication interfaces, and working at the intersection of hardware and firmware.
Key responsibilities
Design electronic circuits including microcontrollers, sensors, actuators, and communication modules
Develop hardware architectures for embedded systems and IoT devices
Collaborate with embedded engineers to define hardware-firmware interfaces
Create PCB designs using Altium Designer or KiCad for prototype and production builds
Perform component selection, BOM management, and cost optimisation
Bring up new hardware, debug signal integrity issues, and validate designs against requirements
Write hardware test plans and assist in EVT/DVT/PVT validation stages
Contribute to electrical design reviews and support DFM activities with CM partners
Required qualifications
Bachelor's degree or higher in Electronics Engineering or Electrical Engineering
3+ years of hands-on electronics product development experience
Strong experience with microcontrollers (STM32, ESP32, NXP, or similar)
Proficiency in PCB design tools (Altium Designer or KiCad)
Experience with communication protocols: SPI, I2C, UART, USB, CAN
Good understanding of signal integrity, grounding, and noise reduction techniques
Ability to read datasheets and application notes; strong troubleshooting skills
Nice to have
Experience with FPGA or CPLD design (Xilinx, Intel/Altera)
Knowledge of RF electronics or antenna design
Exposure to RTOS-based firmware development
Experience with JTAG/SWD debugging and hardware emulators
This is an on-site position paying up to VND48,000,000 per month.
About the role
We are seeking Electronics Engineers to design and integrate electronic subsystems into hardware products. This role focuses on microcontroller-based circuits, sensor integration, communication interfaces, and working at the intersection of hardware and firmware.
Key responsibilities
Design electronic circuits including microcontrollers, sensors, actuators, and communication modules
Develop hardware architectures for embedded systems and IoT devices
Collaborate with embedded engineers to define hardware-firmware interfaces
Create PCB designs using Altium Designer or KiCad for prototype and production builds
Perform component selection, BOM management, and cost optimisation
Bring up new hardware, debug signal integrity issues, and validate designs against requirements
Write hardware test plans and assist in EVT/DVT/PVT validation stages
Contribute to electrical design reviews and support DFM activities with CM partners
Required qualifications
Bachelor's degree or higher in Electronics Engineering or Electrical Engineering
3+ years of hands-on electronics product development experience
Strong experience with microcontrollers (STM32, ESP32, NXP, or similar)
Proficiency in PCB design tools (Altium Designer or KiCad)
Experience with communication protocols: SPI, I2C, UART, USB, CAN
Good understanding of signal integrity, grounding, and noise reduction techniques
Ability to read datasheets and application notes; strong troubleshooting skills
Nice to have
Experience with FPGA or CPLD design (Xilinx, Intel/Altera)
Knowledge of RF electronics or antenna design
Exposure to RTOS-based firmware development
Experience with JTAG/SWD debugging and hardware emulators
This is an on-site position paying up to VND48,000,000 per month.
Thông tin chung
- Thu nhập: Thỏa thuận
Việc làm tương tự khác
Công ty TNHH Thương Mại - Xây Dựng Công Nghiệp Nhật Hoa
Hà Nội, Hải Phòng, Hà Nam, Hưng Yên
Từ 13 triệu VND
CÔNG TY TNHH MAY MẶC QTF
Hồ Chí Minh
Từ 20 triệu VND
Công ty TNHH Thương mại Link Việt Nam
Hà Nội
9.000.000 - 12.000.000 VND
Công Ty Cổ Phần Sacons
Hà Nội, Sóc Trăng, Yên Bái
15.000.000 VND - 20.000.000 VND NET
Công ty TNHH Vina Eco Board - tập đoàn Sumitomo Forestry Nhật Bản
Hồ Chí Minh, Long An, Tây Ninh, Tiền Giang
10 - 30 triệu VND
CÔNG TY TNHH TƯ VẤN VÀ XÂY DỰNG CHÂN TÍN
Hồ Chí Minh
18-25 triệu VND
Công Ty Cổ Phần Sản Xuất Và Thương Mại Xuất Nhập Khẩu Đại Long
Hà Nam, Nam Định, Ninh Bình
Từ 9 - 15 triệu VND
CÔNG TY TNHH LEGACY VOYAGES VIỆT NAM
Hà Nội
15.000.000 đến 20.000.000 VND
Công ty Cổ phần Yolo Life Group
Hồ Chí Minh
10.000.000 - 13.000.000 VND
Thông tin công việc
Vị trí:
Nhân viên
Hình thức làm việc:
Toàn thời gian
Việc làm tương tự
[Hà Nội] Kỹ Sư PCCC Thiết Kế/Hiện Trường - Thu Nhập 12-20 Triệu - Nhận Từ 6 Tháng Kinh Nghiệm
Công ty CP Tư vấn và Xây lắp Nhật Hoàng
Hà Nội
12 - 20 triệu VND
Senior Structural Design Engineer - PT Slab Design | HCMC
CÔNG TY TNHH TƯ VẤN KỸ THUẬT APEX SOUTHERN CROSS
Hồ Chí Minh
Negotiable up to 40M
Cảnh báo dấu hiệu lừa đảo tuyển dụng
Đội ngũ hỗ trợ của JobOKO sẵn sàng đồng hành, tư vấn và giới thiệu những cơ hội việc làm phù hợp, giúp Ứng viên tự tin phát triển sự nghiệp và chinh phục mục tiêu nghề nghiệp bền vững.
Hotline CSKH
1900.63.63.84
Công ty Cổ phần JobOKO Toàn cầu
Đội ngũ hỗ trợ của JobOKO luôn chủ động tư vấn các giải pháp tuyển dụng tối ưu, cam kết đồng hành và hỗ trợ Quý Nhà tuyển dụng đạt được hiệu quả tuyển dụng bền vững.
Hotline CSKH
0962.107.888
Công ty Cổ phần JobOKO Toàn cầu