MANUFACTURING QUALITY ENGINEER
Hạn nộp hồ sơ: 23/09/2026 (Còn 24 ngày)
Ứng tuyển sớm để được ưu tiên
Kết nối với Nhà tuyển dụng để tìm hiểu thông tin và gia tăng cơ hội trúng tuyển
Nhà tuyển dụng đang online
Mô tả công việc
Mô tả Công việc
Essential Functions/Responsibilities:
1. Initiate projects related to product, process, quality systems, or yield improvement based on internal and external quality indicators.
2. Develop and implement systems that improve quality and ensure sustainable results, therefore driving continuous improvement.
3. Use advanced measurement tools, techniques, and test equipment and be able to understand and analyze results.
4. Create and review qualification plans for inner company product transfers (Process Review, Test Plan Development, PCN, etc.)
5. Serve as a training resource for above mentioned measurement and test equipment, ensuring respective personnel understand their operation.
6. Provide guidance and training to Manufacturing Quality Support personnel in the respective area.
7. Monitor and report daily/weekly/monthly KPI's via meetings, email, and End of Month reports.
8. Analyze data required to understand a problem and develop solutions. This includes, but is not limited to: quality data, manufacturing process data, dimensional data, engineering data, training records, audit results, etc.
9. Investigate and appropriately document quality problems using root cause analysis methods and identify robust corrective actions.
10. Create and maintain all relevant Work Instructions, SOP's, Training Documents, and Workmanship Standards
11. Use quality tools such as failure analysis, root cause analysis, DOE, PFMEA, SPC, and others, to identify the source of a problem, correct the problem, and prevent future occurrences on same or similar products.
12. Identify and coordinate containment of any nonconforming materials
13. Audit manufacturing processes for compliance to quality, manufacturing, and engineering standards. Work with the relevant parties to develop plans to address non-conforming audit results.
*The responsibilities as defined are intended to serve as a general guideline for this position.
*Associates may be asked to perform additional tasks depending on strengths and capabilities
Essential Functions/Responsibilities:
1. Initiate projects related to product, process, quality systems, or yield improvement based on internal and external quality indicators.
2. Develop and implement systems that improve quality and ensure sustainable results, therefore driving continuous improvement.
3. Use advanced measurement tools, techniques, and test equipment and be able to understand and analyze results.
4. Create and review qualification plans for inner company product transfers (Process Review, Test Plan Development, PCN, etc.)
5. Serve as a training resource for above mentioned measurement and test equipment, ensuring respective personnel understand their operation.
6. Provide guidance and training to Manufacturing Quality Support personnel in the respective area.
7. Monitor and report daily/weekly/monthly KPI's via meetings, email, and End of Month reports.
8. Analyze data required to understand a problem and develop solutions. This includes, but is not limited to: quality data, manufacturing process data, dimensional data, engineering data, training records, audit results, etc.
9. Investigate and appropriately document quality problems using root cause analysis methods and identify robust corrective actions.
10. Create and maintain all relevant Work Instructions, SOP's, Training Documents, and Workmanship Standards
11. Use quality tools such as failure analysis, root cause analysis, DOE, PFMEA, SPC, and others, to identify the source of a problem, correct the problem, and prevent future occurrences on same or similar products.
12. Identify and coordinate containment of any nonconforming materials
13. Audit manufacturing processes for compliance to quality, manufacturing, and engineering standards. Work with the relevant parties to develop plans to address non-conforming audit results.
*The responsibilities as defined are intended to serve as a general guideline for this position.
*Associates may be asked to perform additional tasks depending on strengths and capabilities
Yêu cầu
Yêu Cầu Công Việc
Education:
1. Bachelor's degree in Engineering (Electrical, Manufacturing, Mechanical, other) preferred. If no experience, a degree is required.
2. Six Sigma background is desired (Green Belt, Yellow Belt, Black Belt).
Required Experience:
1. 5+ Years' experience in Process Engineering, Quality Assurance Engineer, or Operations Management is required.
2. Experience with ISO 9001, ISO 9100, or IATF 16949 Quality systems is ideal.
3. Must be familiar with Manufacturing techniques such as LEAN & 5S
4. Must be able to handle multiple projects simultaneously as priorities can change very quickly.
5. Connector experience is desired but not required.
6. Lifting Requirements: Must be able to lift up to 50 pounds from floor to waist.
7. Must be able to sit for more than 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs.
8. Experience with ISO/TS or Automotive Quality systems highly desired.
9. Six Sigma or Problem-Solving background is desired.
What do you get?
2-month probation time with 100% salary
13th month salary
Performance bonus 2 times/year
Annual salary review
Private Health insurance for the employee, the employee's spouse, children, parents-in-law, with a sum insured up to 183 million/year/person
Annual company trip
Transportation allowance
Month birthday gift from the Trade Union
Gifts on special occasions (ex: women's day,...)
Bonus on public holidays: International labor day, Independent day...
Seniority bonus up to 15 mil
12 annual leaves/year + 12 public holidays/year
Training course: Teamwork, Leadership & Communication, Train the Trainer, DNA.....
Opportunity for oversee training
Very supportive teammates and manager, a respectful & open-minded working environment
FOLLOW US VIA FB & LINKEDIN: "Samtec Vietnam" for further recruitment information.
Education:
1. Bachelor's degree in Engineering (Electrical, Manufacturing, Mechanical, other) preferred. If no experience, a degree is required.
2. Six Sigma background is desired (Green Belt, Yellow Belt, Black Belt).
Required Experience:
1. 5+ Years' experience in Process Engineering, Quality Assurance Engineer, or Operations Management is required.
2. Experience with ISO 9001, ISO 9100, or IATF 16949 Quality systems is ideal.
3. Must be familiar with Manufacturing techniques such as LEAN & 5S
4. Must be able to handle multiple projects simultaneously as priorities can change very quickly.
5. Connector experience is desired but not required.
6. Lifting Requirements: Must be able to lift up to 50 pounds from floor to waist.
7. Must be able to sit for more than 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs.
8. Experience with ISO/TS or Automotive Quality systems highly desired.
9. Six Sigma or Problem-Solving background is desired.
What do you get?
2-month probation time with 100% salary
13th month salary
Performance bonus 2 times/year
Annual salary review
Private Health insurance for the employee, the employee's spouse, children, parents-in-law, with a sum insured up to 183 million/year/person
Annual company trip
Transportation allowance
Month birthday gift from the Trade Union
Gifts on special occasions (ex: women's day,...)
Bonus on public holidays: International labor day, Independent day...
Seniority bonus up to 15 mil
12 annual leaves/year + 12 public holidays/year
Training course: Teamwork, Leadership & Communication, Train the Trainer, DNA.....
Opportunity for oversee training
Very supportive teammates and manager, a respectful & open-minded working environment
FOLLOW US VIA FB & LINKEDIN: "Samtec Vietnam" for further recruitment information.
Quyền lợi
Laptop
Chế độ bảo hiểm
Du Lịch
Chế độ thưởng
Chăm sóc sức khỏe
Đào tạo
Tăng lương
Phụ cấp thâm niên
Nghỉ phép năm
Chế độ bảo hiểm
Du Lịch
Chế độ thưởng
Chăm sóc sức khỏe
Đào tạo
Tăng lương
Phụ cấp thâm niên
Nghỉ phép năm
Thông tin chung
- Thu nhập: Cạnh tranh
Nơi làm việc
- Factory 28,29, Street No. 9-7, Long Thanh IZ, Tam An, Long Thanh, Dong Nai
Việc làm tương tự khác
CÔNG TY CỔ PHẦN THÉP VIỆT XÔ HÀ NỘI
Đồng Nai
8 triệu - 13 triệu
Công ty cổ phần đầu tư xây dựng Sơn Thành An
Hồ Chí Minh, Đà Nẵng, Bình Dương, Đồng Nai, Đồng Tháp
15-25 triệu VND
CÔNG TY SIKA HỮU HẠN VIỆT NAM
Hà Nội, Đồng Nai
Cạnh tranh
Công Ty TNHH Samtec Việt Nam
Xem trang công ty- Địa chỉ công ty: Nhà xưởng số 29, đường 9-7, KCN Long Thành, xã Tam An, H. Long Thành, T. Đồng Nai
- Quy mô: Từ 101 - 500 nhân viên
Thông tin công việc
Vị trí:
Nhân viên
Hình thức làm việc:
Toàn thời gian
Việc làm tương tự
Cảnh báo dấu hiệu lừa đảo tuyển dụng
Thu phí và cung cấp thông tin
- Phí hồ sơ, đồng phục, đặt cọc.
- Yêu cầu nộp bản gốc giấy tờ.
- Cung cấp mã OTP.
Hứa hẹn trúng tuyển 100%
- Không yêu cầu trình độ.
- Không cần thử việc.
Phỏng vấn bất thường
- Địa điểm xa văn phòng công ty.
- Phỏng vấn qua Telegram.
Yêu cầu làm nhiệm vụ
- Tải app, nạp tiền.
- Làm nhiệm vụ nhận thưởng.
Tin tuyển dụng sơ sài
- Mô tả công việc chung chung
- Nhiệm vụ đơn giản, thu nhập khủng
- Lỗi chính tả, đánh máy.
Đội ngũ hỗ trợ của JobOKO sẵn sàng đồng hành, tư vấn và giới thiệu những cơ hội việc làm phù hợp, giúp Ứng viên tự tin phát triển sự nghiệp và chinh phục mục tiêu nghề nghiệp bền vững.
Hotline CSKH
1900.63.63.84
Công ty Cổ phần JobOKO Toàn cầu
Đội ngũ hỗ trợ của JobOKO luôn chủ động tư vấn các giải pháp tuyển dụng tối ưu, cam kết đồng hành và hỗ trợ Quý Nhà tuyển dụng đạt được hiệu quả tuyển dụng bền vững.
Hotline CSKH
0962.107.888
Công ty Cổ phần JobOKO Toàn cầu
