SpaceX | Supplier Development Engineer (Starlink)
Hạn nộp hồ sơ: 21/08/2026 (Còn 6 ngày)
Sắp hết thời gian ứng tuyển, chớp cơ hội ngay!
Kết nối với Nhà tuyển dụng để tìm hiểu thông tin và gia tăng cơ hội trúng tuyển
Nhà tuyển dụng đang online
To apply for this job, you need to complete both steps below:
STEP 1:
Please click the link to submit your application directly to the company:
Your application will only be received by Recruiter if submitted via above link.
STEP 2:
Kindly scroll to the bottom of this page and complete the short VinUni Tracking Form.
Filling out this form alone does not count as applying. Kindly remind this form is not part of the company's application process. It only helps Careers, Alumni, Industry and Development (CAID) Department discover more opportunities and follow up in case of system issues.
Responsibilities
- Planning, proposing, and leading experiments to produce timely and accurate analyses used to drive design, development, and supply chain decisions, with a focus on scalability for high volume manufacturing.
- Assessing the suitability of a fabrication technology for a given part design, including its potential for automation and cost-effective mass production.
- Planning validation exercises to demonstrate initial feasibility as well as manufacturing capability at high volumes, incorporating throughput modeling and yield optimization.
- Analyzing results of validation exercises and provide technical recommendations to enhance efficiency and reduce variability in large-scale production.
- Reviewing progress of development activities at supplier locations and serve as point of escalation for critical process related issues, ensuring alignment with high volume ramp-up requirements.
- Drive process development and capability assessment activities, reviewing part design documentation to ensure alignment with process capability for high volume manufacturing, including DFM principles for scalability and automation.
- Assigns specific tasks and work with SpaceX suppliers to support process development and/or data gathering activities aimed at achieving consistent high throughput and low defect rates.
- Set clear goals for results and provide timely reviews of performance throughout program, emphasizing metrics for production efficiency and cost per unit.
- Establish validation procedures to figure out acceptance of tooling into development builds as well as mass production, incorporating statistical process controls and capacity planning for high volume output.
- Review supplier tool design, process flow, equipment selection, DFM, and DOE proposals, with emphasis on their suitability for high volume manufacturing, such as automated lines and rapid cycle times.
- Identify shortfalls and corrective actions to ensure design compliance and scalability to meet production demands.
- Work with supplier engineering teams to map out process development exercises, secure resources, and commit to schedules in line with program goals, including ramp-up plans for high volume output.
- Assess supplier readiness to support build events and production ramp, evaluating infrastructure for sustained high throughput and supply chain resilience.
- Identify potential execution issues and provide recommendations to mitigate risk, focusing on minimizing downtime and optimizing yield in mass production environments.
- Apply solid understanding of quality control and manufacturing concepts to develop specific Product Quality Plan (PQP) appropriate to program and commodity, tailored for high volume manufacturing with advanced statistical methods and automated inspection.
- Coordinate all Quality Engineering functions for a program, serving as project manager to lead efforts at supplier locations, ensuring robust processes for large-scale production.
- Actively participate in the program planning and monitoring process assuming responsibility for key deliverables at all milestones, including quality gates for volume ramp-up.
- Provide technical direction and guidance to other Quality Engineers supporting the implementation of the PQP, promoting continuous improvement for high yield operations.
- Assess measurability and creatively address concerns directly with stakeholders, incorporating real-time monitoring tools for high volume lines.
- Identify and direct studies to implement improvements in measuring method where appropriate, such as adopting AI-driven analytics for defect prediction.
- Establish audit procedures appropriate to program and supplier to ensure adherence to SpaceX quality standards, with frequency scaled for high production volumes.
- Implement FAI and Cp/Cpk reviews of mechanical parts, extending to ongoing process capability monitoring for sustained high volume performance.
Basic Qualifications
- Bachelor's degree in an engineering or STEM discipline.
- 1+ years of experience in one of the following: supply chain engineering, supplier development/quality, manufacturing, or design engineering.
Preferred Skills And Experience
- Experience in PCBA manufacturing.
- Professional experience with SMT processes (e.g., screen printing, pick-and-place, reflow, wave soldering, and inspection).
- Engineering degree in electrical or mechanical engineering.
- Experience with statistical process control (SPC), Six Sigma certification, or Lean manufacturing principles applied.
- Proven track record of production ramp-up for high-volume electronics manufacturing, preferably in consumer electronics.
- Strong understanding of PCBA failure modes, defect analysis, and quality control methodologies (e.g., 8D, Fishbone, Pareto, PFMEA, DOE, SPC), with the ability to develop Product Quality Plans (PQP), implement FAI and Cp/Cpk reviews, and establish audit procedures tailored for high production volumes.
- Hands-on experience with failure analysis.
- Experience in analyzing large datasets and dispositioning hardware based on data.
- 5+ years of experience in SMT engineering, including leadership roles in supplier development or process engineering for complex consumer electronics systems and/or 5+ years of experience in Final Assembly, Test and Packout.
- Expertise in advanced SMT technologies, such as fine-pitch components, BGA/CSP assembly, selective soldering, and high-mix/low-volume to high-volume transitions.
- Knowledge of environmental testing and reliability standards for consumer electronics (e.g., vibration, thermal cycling).
- Prior experience in the consumer electronics industry, particularly with high volume hardware assembly.
- Strong project management skills, with the ability to manage multiple suppliers and projects simultaneously in a fast-paced environment.
Additional Requirements
- Position is based in VN and requires being onsite - remote work not considered.
- Must be willing to work long hours and weekends when needed to meet critical deadlines.
- Ability to travel: Up to 50% work week travel may be required to suppliers within Vietnam.
Thông tin chung
- Thu nhập: Thỏa thuận
Việc làm tương tự khác
CÔNG TY TNHH FUMO AUTO
Hà Nội
Từ 4 Triệu - Dưới 8 Triệu VNĐ / Tháng
CÔNG TY TNHH THIẾT BỊ CÔNG NGHIỆP ICHI VIỆT NAM
Hà Nội
15.000.000 - 25.000.000 VND
CÔNG TY CỔ PHẦN DƯỠNG SINH Y DƯỢC SAO PHƯƠNG ĐÔNG
Hà Nội
15-18 triệu VND
CÔNG TY TNHH KINH DOANH VÀ PHÁT TRIỂN ĐẠI DƯƠNG XANH
Hà Nội
10 - 12 triệu VND
Công Ty TNHH Giáo Dục Và Đào Tạo Vinacademy
Xem trang công ty- Địa chỉ công ty: Vinhomes Ocean Park, Đa Tốn, huyện Gia Lâm, Hà Nội
- Quy mô: Từ 101 - 500 nhân viên
- Lĩnh vực: Giáo dục / Đào tạo
Thông tin công việc
Vị trí:
Nhân viên
Hình thức làm việc:
Toàn thời gian
Việc làm tương tự
[HN] Thương Hiệu Thời Trang Và Phụ Kiện UPYO Tuyển Dụng Nhân Viên/Freelance Content Creator - VJ/Booking KOL/KOC Part-time/Full-time 2026
LOCAL BRAND UPYO
Hà Nội
Từ 10 Triệu - Dưới 15 Triệu VNĐ / Tháng
Cảnh báo dấu hiệu lừa đảo tuyển dụng
Thu phí và cung cấp thông tin
- Phí hồ sơ, đồng phục, đặt cọc.
- Yêu cầu nộp bản gốc giấy tờ.
- Cung cấp mã OTP.
Hứa hẹn trúng tuyển 100%
- Không yêu cầu trình độ.
- Không cần thử việc.
Phỏng vấn bất thường
- Địa điểm xa văn phòng công ty.
- Phỏng vấn qua Telegram.
Yêu cầu làm nhiệm vụ
- Tải app, nạp tiền.
- Làm nhiệm vụ nhận thưởng.
Tin tuyển dụng sơ sài
- Mô tả công việc chung chung
- Nhiệm vụ đơn giản, thu nhập khủng
- Lỗi chính tả, đánh máy.
Đội ngũ hỗ trợ của JobOKO sẵn sàng đồng hành, tư vấn và giới thiệu những cơ hội việc làm phù hợp, giúp Ứng viên tự tin phát triển sự nghiệp và chinh phục mục tiêu nghề nghiệp bền vững.
Hotline CSKH
1900.63.63.84
Công ty Cổ phần JobOKO Toàn cầu
Đội ngũ hỗ trợ của JobOKO luôn chủ động tư vấn các giải pháp tuyển dụng tối ưu, cam kết đồng hành và hỗ trợ Quý Nhà tuyển dụng đạt được hiệu quả tuyển dụng bền vững.
Hotline CSKH
0962.107.888
Công ty Cổ phần JobOKO Toàn cầu
